Used Drive Station for sale (26,783)

Condition: good (used), overall weight: 180 kg, total height: 1,650 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, BB Stromberg AC Drive SAFUI 400F415 Dksdpfx Akoxlr Aro Asw ABB SAFUI-400F-415 DISCONTINUED BY MANUFACTURER AC DRIVE 380/415VAC 50/60HZ 315/400KVA height:165 length:530 width:450 weight: ca170 DISCONTINUED BY MANUFACTURER

Condition: used, KMA Heat Exchanger and Pumping Station Dkodpfxsym Dx Aj Ak Aew

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR POWER: 75 kW / 100 HP Dkodpezdf U Tsfx Ak Ajw FLOW RATE: 13,500 LITERS/MINUTE

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Dkodsz Hngmepfx Ak Ajw Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: good (used), Year of construction: 2016, 1 used 4-station clamping tower Manufacturer: ALLMATIC Number of clamping devices: 4 Clamping device: ALLMATIC NC machine vises Jaw width: 125 mm Clamping system: Mechanical NC clamping system Application: CNC milling machines and machining centers Suitable for multiple clamping and series production Special advantages Four-fold clamping for high productivity Optimal utilization of the machine work area Reduction of setup and downtime Robust and high-quality ALLMATIC design Ideal for single-part and series production Dksdpfxj Ah Dyrs Ak Aow Flexible workpiece clamping for various machining tasks Scope of delivery 1 × ALLMATIC 4-station clamping tower 4 × ALLMATIC NC vises, jaw width 125 mm

Condition: used, Year of construction: 2013, functionality: fully functional, roll diameter: 50 mm, roll width: 595 mm, total width: 650 mm, total length: 33,500 mm, conveying length: 33,500 mm, roll spacing: 50 mm, axle spacing: 100 mm, frame height: 120 mm, Roller Conveyor / Rollers / Powered Conveyor Condition: Used Model: Drive type: Flat belt Year of manufacture: 2013 Total length: approx. 33,500 mm - Consists of 12 sections: 1x approx. 1,500 mm, 1x approx. 2,000 mm, 10x approx. 3,000 mm - Forms 4 different conveyor lines: 1x 6,500 mm, 3x 9,000 mm Overall width: approx. 650 mm Conveying width: approx. 595 mm Roller diameter: approx. 50 mm Roller pitch / axle spacing: approx. 50mm / 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Color: green Including SEW motor (0.25 kW) Price per meter Support legs to be ordered separately Internal article number: 2026021101 The conveyor system was operational until disassembly. Thanks to the excellent workmanship, your material will move smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics Whether you need roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading goods, we are your experienced partner! We are happy to prepare a customized offer or advise you on planning and installation queries. Simply tell us your requirements and local conditions. Benefit from our many years of experience and our extensive network of experts. We have successfully completed projects in various industries including logistics, the pharmaceutical sector, trades, and electronics. Together, we will work out ways to optimize your workflow and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting systems or supplementary components such as order picking racks or bins. Features: Condition: fully functional, with signs of use Ideal for fast material handling Dkodpj Aicy Eefx Ak Aew Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 2015, Doses product into trays under a weigher The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage. The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tray filling station Filling: Hopper with two flaps Controls: On/off and two adjustable fill times Dodpfx Akoz Ndahs Askw Electrical: 230 V Construction: Stainless frame on castors

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Djdpfe Ahk Urex Ak Aokw Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Deds Ad N Awspfx Ak Askw Sale details - Equipment available from Ireland - International enquiries welcome - Price: On request - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: used, It comprises: 3 dosing tanks (1200mmH x 750mmD) with coils and a liquid dosing pump, with approximate dimensions of: L x W x H: 6000 x 2000 x 3500mm. Dodpfx Ako Ahyhto Ajkw Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, shelf height: 7,200 mm, load capacity per storage section: 2,000 kg, TECHNICAL DETAILS General Information Manufacturer: BÖCKELT Model: TOWER Year of Construction: 2017 Racking System Number of Racking Bays: 41 Racking Height: 7.20 m Maximum Bay Load: 38 t Maximum Load per Level: 2,000 kg Shelves and Storage Dimensions Shelf External Dimensions: 3,340 × 1,600 × 90 mm Additional Loading Height: 60 mm or 160 mm Drawer Internal Dimensions: for panel format 3,000 × 1,500 mm Maximum Weight of Loaded Shelf: 2,300 kg Automated Narrow Aisle Trucks Number: 2 Manufacturer/Model: MLR Mayesto 2.3 Design: Automated narrow aisle trucks with reinforced lifting mast Load Capacity per Vehicle: 2,300 kg up to 4,500 mm lifting height Residual Load Capacity per Vehicle: 2,000 kg up to 7,500 mm lifting height Truck Load Capacity: 2,000 kg at 7,500 mm lifting height per vehicle Travel Speeds Dkodpfx As Aay Dwok Asw Forward/Reverse Travel: max. 1.6 m/s Curve Travel: 0.3 m/s Positioning Travel: 0.1 m/s Battery and Charging Technology Battery Voltage: 80 V Battery Capacity: 930 Ah Charger: on-board Automatic Recharge: via sliding conductors in 3 horizontal aisles Safety and Detection Technology Laser Scanner: SICK, front and rear Software and Control System Control System: MLR LogOS-FTS Operation: fully automatic Visualization: graphic and tabular EQUIPMENT Complete software for fully automatic system operation 41 racking bays 2 automated MLR Mayesto 2.3 narrow aisle trucks Reinforced lifting masts Telescopic forks that can extend on both sides Multi-level telescopic table SICK laser scanners, front and rear On-board charger Automatic recharge via sliding conductors Shelves with aluminum panels Transport order management Vehicle dispatch Storage location management User management Error and signal management Statistics Energy monitoring

Condition: used, Consisting out of: 1 tall material hopper, 2 filters, 4 hoppers (3 attached and one separate) and screw compactor. tall hopper: 3,000 mm high x 1,200 mm in diameter Filters: 3,000 mm high x 1,000 mm in diameter Dsdpfx Ake Ahyhwj Aokw Hoppers depth: 5,000mm *The factory is still in production, with operations due to cease shortly. The site will be cleaned before collections begin. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2023, condition: used, Manufacturer: Croix SASYear: 2023Type: Semi-automatic bag-emptying stationOsertech reference: 12509-1 / 12509-2 / 12509-3 Dkede Ah Ufyspfx Ak Aew Quantity available: 3 (sold separately or as a group) Hopper capacity: 180 LSafety grille: 25 x 35 mm meshPneumatic vibrator Pneumatic transfer connection- GEA 7880-2122 SES.P2EXE/43/52/65- Year: 2023- Butterfly valve- Outlet diameter: DN60 Flange for connection to a fine-particle extraction system / Vacuum Electrical components fitted: ATEX class

Condition: used, color: other, Part suitable for: DAF trucks Damage: none VAT/marginal taxation: VAT deductible Dkjdpfx Akour S Hwj Asw

Condition: used, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Djdpe Ahzv Aofx Ak Aokw Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2008, - with 6 plates - with 2 labeling stations (front- and back label) for self-adhesive labels Technical data: working direction: left-right, rotative, clockwise Dkjdpe Ahlbijfx Ak Aew capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 6 bottle diamater max (mm): 100 bottle diamater min (mm): 60 bottle height max (mm): 370 bottle height min (mm): 180 motor height adjustment: yes speed adjusment: frequence converter

Condition: good (used), mileage: 771,224 km, power: 368 kW (500.34 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, AdBlue, central locking, cruise control, fridge, soot filter, = Additional Options and Accessories = - Cabin - Air suspension - Particle filter - Sun visor - Central lubrication system = Notes = Volvo FH13.500 Globetrotter XL 6x2 - RHD - Leather - Fridge - Right-hand drive Model year: 2017-03-17 Mileage: 771224 km VIN: YV2RT40CXHA799104 Right-hand drive XL cab 6x2 Fridge Leather seats = Additional Information = General information Year of construction: 2017 Technical information Number of cylinders: 6 GVWR: 27,000 kg Transmission Gearbox: I-Shift, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Front axle: Max. axle load: 8000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf suspension Rear axle 1: Max. axle load: 7500 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Rear axle 2: Double tires; Max. axle load: 11500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Suspension: Air suspension Condition Technical condition: good Optical condition: good Dkodpfxe Ah Rbkj Ak Aew

Condition: used, Year of construction: 1989, Machine: AVE Rinser RAI24 rinser 24-stations Technical data: capacity bph max.: 5000 Dkjdpfs Ahld Ejx Ak Asw working direction: left-right, rotative number of nozzels: 24 first cleaning step: water

Condition: like new (used), Year of construction: 2021, Rotary welding drive for sale Dodpfoz Rx N Ujx Ak Aekw Sale only within EU member states! No private sales. MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 Dkjdpfx Akezmr D Eo Ajw You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2017, condition: new, For sale: ABB ACS880 industrial frequency converter, brand new and unused, supplied in original ABB packaging. 5 units available – sold individually. Technical specifications: * Manufacturer: ABB * Model: ACS880-01-061A-3+E200 * Supply voltage: 3-phase, 400 V AC * Rated output current: 61 A * Protection class: IP21 * Year: 2017 * Condition: New, unused, in original box Included: Dedps Ahd U Refx Ak Aekw * ABB ACS880 frequency converter * Original ABB packaging * Control panel * Original documentation * Factory test report Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Worldwide shipping available upon request. Sold as is, where is, without warranty or returns.

Year of construction: 2023, condition: used, Measuring Machine Manufacturer: PROZAP Type: EK0 EOL station Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 40 A Dkodpfozbvivjx Ak Asw - Operating pressure: 4.5 bar - Total power: 15 kW - Weight: 1,500 kg In our assessment, the machine is in mint condition. Technical features: - Dimensional inspection of the cooling plate using measuring heads - Automatic label application Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller, 20% discount when ordering more than one unit. DEVELOPMENT OF GSG ROBOTICS Dkedpfx Akoz Tafce Aow GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Dksdpfxjytm Tij Ak Aew

Condition: good (used), Year of construction: 2014, Direct Drive Straight Machine APL (Fully-Automated Plate Changing ) InlineColorPilot IPC (Graphometronic): Automatic inline color measuring and controlling system PressPilot Center IntegrationPilot plus Non-stop Antistatic Device on Feeder (Eltex) Antistatic Device on Delivery (Eltex) Ink unit Temperature Control Technotrans (Watercooled) Automatic Blanket Washing Device with Blanket (Elettra) Dksdsxiw Tqjpfx Ak Asw Automatic Ink Roller Washing Device Impression Cylinder Washing Device with Blanket Airglide Delivery ROLAND SelectDryer IR/TL Dryer - High Performance Performance Package Coating System Tresu with Doctor Chamber Blade Powder Max smart: Powder Sprayer QuickChange Air: Job specific air settings for all relevant consumption points via the control console QuickChange Clamp: Multi-purpose speed clamp for the coating form cylinder QuickChange Color Plus: Color adjustment system with computer-assisted optimization of the ink slide presets QuickChange Transferter QuickStart: re-start with fewer waste sheets Premium Speed: 18.000 s/h max. LCS: Low Coverage Stabilisation of Inks Central Air Cabinet: SelectAirStation