Used Driven Tools for sale (38,765)

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Ledpfx Asu Imp Tekqjru tool trolley with tool set 272 pieces. See pictures

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW Lodpo Ad Si Tefx Akqjru weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m Lrjds Ad Skdspfx Akqsu with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested Lrodpfxszz S Rno Akqeu In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Lrodpfx Aks Aaqz Tsqsu Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Year of construction: 2010, condition: good (used), Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries Lsdpfjy Ayb Tex Akqsru

Condition: used, Year of construction: 1988, operating hours: 66,120 h, functionality: fully functional, machine/vehicle number: 152.51.80.8xx, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, type of input current: three-phase, total height: 2,500 mm, total length: 2,100 mm, total width: 2,400 mm, overall weight: 3,100 kg, input voltage: 380 V, Equipment: documentation/manual, CNC milling machine Mikron WF 61 C – Heidenhain + accessories We are selling a Mikron WF 61 C with Heidenhain control from our machine inventory. The machine is offered including accessories, vices, and milling chucks. Machine and equipment: • Manufacturer: Mikron • Model: WF 61 C • Control: Heidenhain • Clamping table with T-slots Ledpfxs Aazphj Akqeru • Separate control panel • Protective guard in the work area Included in the scope of delivery: • Mikron WF 61 C • Vices • Milling chucks The machine shows signs of wear and tear due to age and use, as well as paint chipping. The current original photos show the visual condition. An inspection is possible by appointment. The exact scope of accessories can be discussed and agreed upon. Terms of sale: Sale exclusively to entrepreneurs within the meaning of § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects in materials and workmanship. No guarantee regarding the condition is provided. The exclusion does not apply to the extent that a defect was fraudulently concealed or a guarantee regarding the condition was given. Commercial sale with invoice. Collection and transport by arrangement.

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Lredpfjyhdi Rex Akqou Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Lrjdpfx Akez Aa Idjqsu Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: excellent (used), Year of construction: 2021, Food Tools CP-1H half sheet product press Lrjderza Duspfx Akqeu Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS Ledpfx Akez Uhydoqjru General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Lrsdpfx Aj Aa Il Aekqju Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: new, EPS LINEAR – Automatic length stop system for fast and accurate operation The EPS LINEAR automatic length stop system makes it easy to quickly and accurately position materials to the desired length. The system is suitable for mounting on both new and existing machining equipment and is widely used in the wood, plastics, aluminum, and light steel industries. Simple operation, flexible application Use the clear touchscreen to enter the desired dimension, in millimeters or tenths of a millimeter. The current and set positions are clearly visible thanks to the large indicators and the clear screen layout. EPS LINEAR can be placed on either the left or right side of the machining equipment. The system is available from 1 meter and can be extended up to 14 meters. For working with short pieces, a simple attachment can be easily installed and removed. Technical specifications - Positioning speed: up to 40 meters per minute. - Holding force: 1,800 N. - Accuracy: ± 0.10 mm. - Supply voltage: 230 V, with 24 V control voltage. - Operation: start, stop, reference, measuring probe on/off, and access to parameter settings. - Position display: current and desired position. - Emergency stop: for immediately stopping the system. - Touchscreen: large indicators and a clear key layout. - Attachment for short pieces: easy to install and remove. - Software: fully developed and owned in-house, with continuous updates. - Components: industrial, maintenance-free components. - Cabling: including cable track, available up to a maximum of 14 meters. Want to know more about EPS LINEAR for your machine? Contact TM-Tools B.V. We will be happy to advise you on the options for your application. This advertisement has been prepared with the utmost care. Typographical errors and inaccuracies in the specifications are subject to change. Ljdpfxetd Tnds Akqoru

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Ljdez Uql Ajpfx Akqjru Coolant system Loading system

Condition: excellent (used), Item description: Assortment of SK40 tools, approximately 250 pieces, from Wohlhaupter, Komet, Granat, etc. Ledpfx Akszz Itfjqeru ----- Item condition: The goods come from a company liquidation. Condition: used Internal number: 26.528, 26.530, 26.531 & 26.532

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PD 82 en Multi, Why choose the original Tiger Pile Driver? 1850 strikes per minute assembled in Western Europe drives piles up to 130mm powered by a Honda 4-stroke engine one-person operation ergonomic and durable from €2190.00 excl. VAT The Tiger Multi can drive piles up to 130mm. Demonstration machines/used machines available! The Tiger pile driver runs entirely on gasoline and is easy to operate by one person. This makes the Tiger pile driver very mobile and user-friendly. Because the striking mechanism of the Tiger pile driver is made of double-hardened steel, the quality of this gasoline-powered pile driver is very high. It is an extremely powerful machine that is surprisingly lightweight, weighing only 18kg. The Tiger pile driver is powered by a Honda GX35 or GX50 four-stroke engine. This is the highest quality engine for this type of work. The engine is designed to tilt, allowing you to work effectively at any angle. The movement is achieved by air compression generated within the Tiger pile driver itself. This means that the Tiger pile driver does not require any other power source, such as hydraulics or a compressor, and cannot be overloaded. In addition, the Tiger pile driver is incredibly fast, delivering 1850 strikes per minute. To ensure comfortable operation, the Tiger pile driver has internally spring-dampened handles. The Tiger pile driver is designed to perform its job under the most extreme conditions without the need for additional machines or materials. The Tiger pile driver is suitable for both wooden, metal, and plastic piles. With this pile driver, the pile is immediately fixed in the ground, unlike setting it using a ground auger. A major user benefit of the Tiger pile driver is the fact that you can install all types of wooden, steel, and plastic piles up to a diameter of 105 mm. Even square piles of 7x7/8x8 and 9x9 can be installed in this way. The Tiger pile driver was designed with the help of people with more than 20 years of practical experience in driving piles for fencing. The key words here were: fast, lightweight, reliable, and user-friendly. The Tiger pile driver has more than succeeded in these areas. After testing more than 20,000 piles, the Tiger pile driver has proven to be extremely reliable. The assembly in the Netherlands of high-quality components and the drive from a Honda GX35 or GX50 engine ensures a quality product for the professional user. Ljdpfx Akjzx Ul Aoqeru With 3 mobile dealers throughout the country, a rapidly growing network of permanent dealers, and several rental/loan machines in stock.

Condition: like new (used), Year of construction: 2017, operating hours: 180 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10 rpm, spindle speed (min.): 10,000 rpm, table length: 800 mm, type of input current: three-phase, total height: 2,200 mm, total length: 2,164 mm, total width: 1,860 mm, overall weight: 2,800 kg, table load: 300 kg, grinding spindle motor power: 15,000 W, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, OPTIMUM OPTImill F 105 CNC machining center (vertical) – year of manufacture 2017 For sale is a vertical, high-performance CNC machining center from the reputable manufacturer OPTIMUM, model OPTImill F 105 CNC. The machine was only exhibited at trade shows and is in excellent condition and ready for immediate use. The unit has only approximately 180 operating hours! General information: • Condition: Like-new demonstration machine (year of manufacture 2017) • Control: Intuitive and reliable Siemens Sinumerik 808D advanced • Premium accessories: Including high-quality RENISHAW Primo measuring probe for maximum precision • Spindle performance: Dynamic spindle up to 10,000 rpm with BT 40 tool holder _____ Technical data: Travel distances: • X-axis: 550 mm • Y-axis: 305 mm • Z-axis: 460 mm • Spindle/table distance: 100 – 600 mm Main spindle: • Speed range: 10 – 10,000 min⁻¹ • Drive power: 11 kW (short-term) / 7.5 kW (continuous) • Max. torque: 70 / 48 Nm • Tool holder: BT 40 Work table: • Clamping area: 800 x 320 mm • Max. table load: 300 kg • T-slots: 3x 14 x 100 mm Automatic tool changer (ATC): • Number of positions: 12 positions (carousel) • Max. tool diameter: 70 mm • Max. tool weight: 6.0 kg • Tool change time: only 7.0 seconds (tool-to-tool) Dynamics & accuracy: • Rapid traverse (X / Y / Z): 10 m/min • Feed rate max.: 10,000 mm/min • Repeatability: +/- 0.008 mm • Positioning accuracy: +/- 0.01 mm Connection and space requirements: • Total power requirement: 15 kVA • Machine weight: approx. 2,900 kg • Space requirement (L x W x H): approx. 3.5 x 2.5 x 2.4 m _____ Scope of delivery: • CNC vertical machining center OPTImill F 105 CNC • RENISHAW measuring probe • Integrated 12-position tool changer • Efficient chip removal system • Powerful coolant system with coolant pump • Complete, original documentation/manual Lrjdpfx Aozkhvrekqju Are you interested? A demonstration under power can be arranged.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch Lodpfx Akjz S Afpsqeru -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1998, Immediately available, free from insolvency: Motorized swivel bending machine GEKA Type NSJ 1500/2.5 Year of manufacture 1998 Working length 1500 mm Material thickness 2.5 mm Drive power 3 kW Weight 2.5 tons Complete with all accessories Price: EUR 3,250.00 plus VAT, ex works. Ledpo Aa Iqrsfx Akqsru

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 Lrede Aa Ikrjpfx Akqeu CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: used, Year of construction: 1965, Technical details: grinding length: 250 mm centre height over plate: 120 mm workpiece length - max.: 600 mm grinding spindle - swivable: 350 ° grinding head adjustable: 230 - 250 mm grinding diameter: 200 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: 120 × 950 mm table movement: 500 mm table - inclinable: 45 Grad Lrodjz E Hdzjpfx Akqju dimensions of grinding wheel: 160 mm total power requirement: 0,5 kW weight of the machine ca.: 0,65 t dimension machine approx.LxWxH: 1.5 × 1.2× 1.65 m The SWU 250 is designed for sharpening and grinding various types of tools. Thanks to the adjustable tool holders and the swivelling grinding head, different tool geometries can be machined. *

Condition: excellent (used), Year of construction: 2016, overall weight: 420 kg, tool diameter: 420 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement. THE ADVANTAGES - Very little use, new condition, last ZOLLER maintenance 12/2022 - CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools - Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected - pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines - Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50 TECHNICAL DATA - Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm - max. tool weight 50 kg - 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar - W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016) Lrsde Advkzjpfx Akqeu 1. Z05MK446.11 USB camera with optics and integrated LED incident light 2. Z05E6187 Transmitted light "pilot" "DLR" / V-series 3. Z05E6127.11 USB camera with optics and integrated LED incident light 4. V429530-01 HGV-ACE mounting assembly vent. 450+600 5. V429515 Accessory kit for drive and ROD "venturion 450/600" 6. N001831 Drive unit linear CNC/"usbmotion" 7. N001831 Drive unit linear CNC/"usbmotion" 8. N001918 Drive unit rotary CNC/"usbmotion" 9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80 10. Z05E7026-01 USB motion controller 11. Z05E6038-00 Valve module Z100-V 12. Z05E6037-20 24V voltage distribution with fuses 13. Z05E6035-10 Lighting module Z100-L 14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U 15. Z9734883-01 Printer for TH labels, print width 25–108 mm 16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz ADDITIONALLY INCLUDED - Adapters SK 40, VDI 40 and VDI 50 - Control unit on stand with monitor, keyboard and mouse - Software ZOLLER pilot 3.0 - Cables and small parts as shown in the photos Tools and tool holders are not included in the scope of delivery. SERVICE By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport. TRANSACTION Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached. Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Lrodpfxem Uygvo Akqeu Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2015, condition: excellent (used), Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile Lredpfx Akjix I Hqeqju

Condition: good (used), Year of construction: 2007, Rollomatic GrindSmart 620XS Technical Data Model designation: CNC 620 XS Control system: FANUC, operator panel FANUC PANEL i Loading system: Gripper with workpiece pallets Oil mist separator: Elbaron, included in the scope of supply Accessories: Workpiece pallets and grinding wheel holders as shown in the photos Connection, weight and dimensions Lrjdpfxs Aba Tno Akqou Electrical connection: 3 × 400 V / 50 Hz Equipment and scope of supply Elbaron oil mist separator (part of the machine) Loading system with gripper and workpiece pallets Additional workpiece pallets as shown in the photos Grinding wheel holders with grinding wheels as shown in the photos Related accessories as shown in the photos Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of supply agreed upon in the purchase contract shall apply.