Universal tool milling machine

DECKEL FP 2

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Gsdpsx A Eddofx Af Soit Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min Gijdporqwbiefx Af Sot - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 Gisdpfxechfyfo Af Sot with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen - Gisdsfcqfpjpfx Af Sst

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Gsdpfsv Rm Iwsx Af Sjit

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system Godpfjfzk Hfsx Af Soit - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Gjdod Tytyopfx Af Sjit Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min Giodpfx Aetqqmhsf Sot table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: ready for operation (used), Tool Milling Machine / DECKEL FP 2 with 3-Axis Digital Readout - Heidenhain ND 780 - Machine in well-maintained original condition - Travel X/Y/Z 450x230x400mm - 3-axis digital readout Heidenhain - Automatic feeds / rapid traverses on all three axes - Spindle speed range 40-2000 rpm - Universal tilting, swiveling, and rotating table - Horizontal / vertical milling setup with sliding head - Tool holder ISO 40 - Coolant system - Various tool holders & collets - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors / input mistakes reserved Gjdpfx Ajy R Emqsf Soit

Condition: ready for operation (used), Tool Milling Machine DECKEL FP 2 / with Heidenhain 3-Axis Digital Display - Original paint / Well-maintained overall condition - Heidenhain 3-axis digital display - Travel X/Y/Z 450x230x400mm - Table clamping surface 700x350mm - Speed range 40 - 2000 rpm - Feeds / rapid traverses on all three axes - Tool holder ISO 40 - Vertical / horizontal milling device with vertical sliding head - Coolant system - Chip pan - Work light - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Giodpfx Ajy Rgk Def Sot Subject to errors and input mistakes.

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t Gjdpfx Astqqlljf Sjit dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: Giodpfxsy H Ibcj Af Set >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Godsy I Adhjpfx Af Seit

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm Gjdpfx Aeflrg Tef Soit table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: ready for operation (used), DECKEL FP 2 Tool Milling Machine from Educational Facility - Well-maintained original condition - Travel paths X/Y/Z 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40 - 2000 rpm - Automatic feeds/rapid traverse on all three axes Gedpfx Aox Hyuhjf Seit - Tool holder ISO 40 - Vertical/horizontal milling attachment - Vertical head swivels and features a quill for drilling - Coolant system - X-AXIS leadscrew nut "NEW" - Machine feet - Various tool holders - Chip guard - Machine base - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500kg Errors and omissions excepted.