Used Duo Grind for sale (4,325)

Year of construction: 2021, condition: new, Conversion kit for JUNG HF50, changing from Leonhardt-type control to thyristor control. On-site installation is also possible. Bdedpfjhcn Hyox Afgoi

Condition: used, Year of construction: 1997, Centerless grinding machine BOCCA MALANDRONE R 120/500 CNC Bedpfjhzvkwjx Afgsdi GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x508 mm Regulating Wheel Dimensions: Ø355xØ152,4x508 mm

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Bdsdpeyv Iqvofx Afgsi Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning Bsdpfx Aoyukdzjfgedi manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, grinding diameter 500 mm Bdodpfx Ajxzk Nisfgji grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change Bjdpfjxzq I Sox Afgedi - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release Bjdpfx Afjxaaq Togodi built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel Bjdpfx Aexabf Eefgjdi properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible Bdsdpfow U U U Dex Afgji - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Bodpfxsw T Sd Ts Afgjdi RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 10.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment Bdedpoxaaxqsfx Afgji - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: used, Year of construction: 1990, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm max. workpiece weight between centres 250 kg Maschine mit sehr wenigen Betriebsstunden nach Überholung beim Karstens Fachbetrieb. Zustellsteuerung Jetter Digitalanzeige Innenschleifvorrichtung Reitstock mit Zylindrizitätsfeinverstellung Hydraulische Reitstockpinole Etc... Bdodpfx Aoxbh Ebsfgoi Luftkissenschnellverstellung Schleifspindelstock

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm turning speed range 920 / 1415 U/min Bdsdpjxq Hgvsfx Afgji voltage 380 V power requirement 1,9 kW volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Bsdoxmhyiopfx Afgjdi Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: new, functionality: fully functional, overall weight: 7 kg, SAUER DUO S3 renovation milling machine, brand new Voltage: 230V / 50 Hz Power: 1500 Watts RPM: 2200, head diameter 150 mm. A floor milling machine for: removing adhesives, removing paints, levelling concrete, etc. Bdsdpfx Afoxp Supegsi With proper dust extraction, the machine is suitable for asbestos remediation. We can offer the machine HM Splite with multiple milling heads HM Split. SAUER Trioschleifer DTS 850. Demonstration machine 230 Volts / 50 Hz 750 Watts, weight 2.6 kg. Speed: 1500 - 13,000 RPM. We can supply this machine with a wide range of accessories (see the pictures).

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Bedpfjz R Nptjx Afgsdi Subject to alterations, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 Bedpfx Afoz Iybfsgjdi - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) - Grinding wheel: 500x63 mm, 50 m/s - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 - Tailstock quill travel: 63 mm - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: used, Year of construction: 1986, Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Bdsdpjz Iz Tvofx Afgsi Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Condition: ready for operation (used), Year of construction: 1999, operating hours: 38,700 h, functionality: fully functional, machine/vehicle number: 011.0389.90.065, distance between centers: 1,000 mm, grinding spindle motor power: 7,500 W, overall weight: 7,000 kg, Manufacturer: Studer Model: S40 Year of manufacture: 1999 Machine number: 011.0389.90.065 - Control system: Fanuc 16T - Controlled C-axis - Distance between centers: 1000 [mm] - Center height: 175 [mm] - Travel (Z/X): 1050 x 275 [mm] - Max. feed rates (Z/X): 10 x 5 [m/min] - Grinding spindle type: 2 external - 2 external left grinding wheel dimensions: 500 x 80 x 203 [mm] - Grinding motor power: 7.5 [kW] - Speed: 1670 - 2110 [rpm] - Grinding spindle orientation: -15 to +225 [°] - Resolution: 1 [°] - Workpiece spindle taper: MK5 - Workpiece spindle speed: 1 - 1027 [rpm] - Workpiece spindle power: 0.785 [kW] - Tailstock: MK3 - Quill travel: 35 [mm] Bedjz Iudhspfx Afgodi - Weight: 7000 [kg] - Operating hours: 38,000 hours

Condition: good (used), Various accessories for the tool grinding machine SWU 250, manufactured by Gotha or Königsee, are for sale. Bodpfx Asz E U Dcofgsdi The images will be added gradually. Individual sales are possible. Inquiries about specific parts can be made. Price proposals are welcome.

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Bdjdpfxjz H Iwfo Afgei Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: used, Year of construction: 1990, Used straight-line glass edging machine, BOVONE Type ELB14, manufactured in 1999. Bdodpfx Afez H I Hyegoi

Condition: used, Year of construction: 1981, functionality: fully functional, Surface Grinding Machine JONES & SHIPMAN 540 L Travel X: 406 mm Travel Y: 470 mm Travel Z: 168 mm Year of construction: 1981 Magnetic chuck dimensions: Length 355 mm x Width 150 mm Grinding wheel diameter: Ø 180 mm Spindle motor: 2 speeds motor Motorised raising/lowering Equipped with: Lubricant tank Bodpfsz H Rzmjx Afgsdi Voltage: 220 V Tri Dimensions (L x W x H): 1300 x 1300 x 1900 mm Total width with lubricant tank: 2000 mm Weight: approx 1,2 T

Condition: ready for operation (used), Year of construction: 2008, Various industrial polishing, sanding, grinding, and sawing machines Bdodpoz H R Rbofx Afgei Due to the cessation of our business operations, we are offering a range of professional metalworking machines for sale. These machines come from our own production environment and can be acquired individually or in combination. The range includes polishing, sanding, and grinding machines, supplemented by various other workshop machines. The photos show, among other things: - Double polishing/grinding machine - Belt sander - Vertical sanding/grinding machine - Column drill - Various industrial band saws - Various related tools and accessories Including machines/equipment from Slijp Machinefabriek IJmuiden, Marpol, Bauer Maschinenbau, and Hugo Schneider. The machines have been used for professional metalworking and are suitable for, among other materials, aluminum, steel, and stainless steel, depending on the specific machine and the tools used. Machines can be inspected by appointment. Purchasing multiple machines together is negotiable. Price: upon request / offers per machine If you are interested, please specify which machine you are referring to. Additional photos, data, and information are available upon request.

Condition: excellent (used), Year of construction: 1963, Maximum height: 100 mm Bjdpfx Afozxqt Nogedi Distance between centers: 500 mm Grinding wheel diameter: 300 mm Maximum grinding wheel speed: 2,825 min-1 Grinding head can be rotated 90° to the left and right Maximum workpiece speed: 750 min-1 Spindle taper MK 4 Tailstock 3-jaw grinding chuck 125 mm Faceplate 160 mm ER 40 collet chuck with 28-piece collet set Fixed center Grinding wheel flange with grinding wheel Wet grinding device