Used Dust Exhaust for sale (29,287)

Condition: good (used), Horiba Type: Mexa 7100D Technical data: The exhaust gas concentration of CO(L) CO(H) CO2 O2 THC CH4 non-Ch4 NO NOx NO2 is measured in detail The system contains the following analyzers: CO/CO2 analyzer AIA-72X O2 analyzer MPA-720 NO/ NOX analyzer CLA-757 THC analyzer FIA-/26 Ksdpfx Agsuz Tvyozsnf The calculated and measured values of the MEXA can be output via an analog interface or network. Year of manufacture 2011 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Knsdsx Hh Iispfx Agzef Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified Knsdpfxswanf Uj Agzof 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg

Condition: used, filter area: 108 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Device dimensions: Kjdpfx Ajxx R Nkegzjnf Filtration unit: Width: 1.95 m Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Width: 1.40 m x 1.25 m Height: 1.25 m

Condition: like new (used), Year of construction: 2016, Demonstration Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 2300 m³/h. The extraction unit is in like-new condition, has been inspected and refurbished by our qualified technicians. Knedexxkr Sopfx Agzjf Technical data: - H3 dust tested - Extraction connection diameter: 200 mm - Automatic chip shaker - Steel impeller - Max. air flow rate: 2300 m³/h - incl. briquette press FBP 60 (50-70 kg/h) - Year of manufacture: 2016 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL, briquette press, briquetting Reference: R-A0117

Condition: good (used), Year of construction: 2011, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik Vacomat 200 XPE mobile dust collector -Nominal flow rate: 2260 m³/h -Exhaust fan: 3.7 kW -Intake manifold: Ø 200 mm -Individual components: electric filter cleaning, 3 chip containers, see photos Knjdpfxsxu Dybo Agzsf -Dimensions: 890/2620/H2120 mm -Weight: 440 kg

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. Knjdort U Nujpfx Agzof The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Grinding dust extraction Kodpfecfy Hqsx Agzsnf

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Knsdpfxjrbiiws Agzof Extraction diameter: 160 mm Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h 3.4 kW Automatic, motor-driven filter cleaning

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition Knedpfex A Exuex Agzef

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW Kjdpfx Agoxxiy Uezenf The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO

Condition: excellent (used), Year of construction: 1996, Extraction System Manufacturer: Höcker-Polytechnik Model: EA 160 Year of manufacture: 1996 Extraction nozzle diameter: 160 mm Power: 2.2 kW Volumetric flow rate: 2,050 m³/h Vacuum: 2,580 Pa Ksdpoxz Ayaofx Agzsnf Cleaning: Automatic-mechanical Weight: approx. 320 kg

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Knjdsn Armajpfx Agzjf Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Ksdjudalwjpfx Agzonf Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: good (used), Year of construction: 1998, suction capacity: 4,900 m³/h, extraction connection diameter: 250 mm, inlet: 250 mm, Dust extractor, chip extraction unit, self-cleaning pneumatic negative pressure filter Alko Mobil JET 250 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust in various technological processes. Fan power: 6.5 kW Airflow: 4900 m3/h Vacuum: 2740 Pa Connection diameter: 250 mm Air return Stock no.: 1020 Knsdpeqwyafsfx Agzef

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg Kodpfx Agjxciw Iozsnf The high-performance fan is in very good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace Knsdsxt Dq Rjpfx Agzof - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Knodpfx Agorb D Nozof Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm Kjdegkglxepfx Agzsnf and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Year of construction: 1997, condition: ready for operation (used), Offered: Vacumobilmobilentstauber year 1997. Extraction diameter 250mm, nominal volume flow 4241m³/h, minimum volume flow 3534m³/h, negative pressure at minimum volume flow 2350Pa (measured at the interface with a 4.0m hose Ø250mm), motor power 4.0kW/0.18kW, nominal speed 3000min⁻¹/900min⁻¹, weight approx. 630kg. Inspection is possible by appointment. Knodpfx Agexy R E Ijzjf

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. Knsdex Agpzjpfx Agzof The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown Kedpjg I D Nyofx Agzonf flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Condition: used, Year of construction: 2009, Silo for sawdust in very good condition. Capacity: 280 m³. Knedpfx Aex Av Rnjgzjf

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 9,000 m³/h, type of input current: three-phase, total width: 990 mm, total length: 1,980 mm, total height: 2,500 mm, intake manifold diameter: 300 mm, input voltage: 400 V, power: 11 kW (14.96 HP), overall weight: 450 kg, filter area: 165 m², noise level: 70 dB, suction capacity: 9,000 m³/h, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description Kedpfx Agsxx Ia Hszenf The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium volume flows and offers high particle separation efficiency. Main Features: - Multiple filter cartridges arranged horizontally provide a compact and maintenance-friendly design. - Particularly suitable for industrial applications where constant and reliable dust extraction is required. Your Benefits - High filtration efficiency & air quality: The multi-stage filtration effectively retains fine dust particles, contributing to cleaner air and extending the service life of your production equipment. - Compact design: The horizontal layout saves space and simplifies integration into existing systems. - Low maintenance: Easy access to filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 11 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / ex stock Installation and commissioning (optional): available on request by our trained technical staff. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize system uptime.

Condition: good (used), Horiba Type: OBS-ONE -GS02 The OBS-ONE measures the exhaust gas concentrations of CO, CO2, THC, NOx, NO2, particle measurement, exhaust gas flow rate and GPS data Exhaust gas analyzer for CO CO2 NO NOx Power supply, converts alternating current into direct current for the central unit Control unit, 24V input/output, OBD, LAN connection, connection to the other modules, connection for analog outputs Particle measurement Power supply exchange unit, changes the power source without interruption External input for 16 thermocouple sensors and 4 voltages Knjdpfouz Tucjx Agzjf Year of manufacture 2016 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We are happy to answer any further questions you may have over the phone.