Used Dust Filter for sale (10,350)

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Bjdpoy H Exfjfx Amrslk

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: TR0071_ALM-RD 325, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD325 Type: ALM-RD325 incl. 2 x air filters Delivery quantity: 5.08 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 83 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately. Bedpfxehu Sb Ro Amrelk

Condition: used, mileage: 696,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left Bedpjwnz Dtjfx Amrslk • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Blsdpfxobuvbre Amrok Location: available from warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from warehouse 54634 Bitburg Immediately available Blsdpfxobqachs Amrok Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications POWER UNIT 160 P: • Intake nozzle diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. volume flow: 2000 m³/h • Rated volume flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² • Filter cleaning: Compressed air cleaning • Collection container (rolling container): 241 liters • Dimensions (L x W x H): 1684 x 830 x 2050 • Weight: 288 kg • Design / Operating side, selectable: right / left Location: In stock at warehouse 54634 Bitburg Excellent price for the showroom model. Bodsbpg Itspfx Amrolk

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Bedpfx Ashkztwsmrslk Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Bsdpfxjhk Dfre Amrslk Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Sold at a special price Bedpfxecdrzdo Amrslk Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Bodpfx Aecdr Enjmrslk Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Bedpev Sk Tmsfx Amrjlk Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available - Bjdow T U Uzopfx Amrjlk

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters Blodobpg Ncjpfx Amrjk • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: used, Year of construction: 2022, Design of intake nozzle: left Diameter of intake nozzle: 200 mm Nominal volume flow: 2260 m³/h Maximum volume flow: 3400 m³/h Filter area: 12 m² Cleaning: vibrating motor Chip disposal: 2 collection containers Blsdpfx Amezqvcgsrsk Collection volume: 350 liters Filter material: polyester needle felt Negative pressure at nominal volume flow: 3500 Pa Negative pressure at maximum volume flow: 2700 Pa Installation: mobile Weight approx.: 410 kg Motor power: 4 kW Power connection approx.: 400 Volt/50 Hz Location: Rieth

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), in very good condition, 100% functional. Bedpfxoi Eblae Amrjlk

Condition: used, Dust Collector, Dust Separator, Dust Extraction Filter Unit EX Explosion-Proof FDI HCH, Used machine Manufacturer: FDI Type: HCH216/1000 Year of manufacture: 2004 Weight: 460 kg Condition: Used, heavy-duty industrial EX explosion-proof design Bledpfxszm Rzvo Amrok Overall dimensions: 2100 x 1700 x 1800 mm

Year of construction: 2025, condition: like new (used), Almost NEW Compact filtering unit mod. FC320 for sale! ADVANTAGES: 1. Negative pressure 2. Fire extinguishing system by powder 3. Rotary valve 4. Pulse air sleeves cleaning 5. Extra low noise 6. Waste extraction to big bags. The filtering unit mod. FC320 is studied and realized for an efficient filtration in less space. Its compact and thin line makes it suitable to be placed in every area, also inside productive areas. Thanks to an accurate design it is reliable, silent and easy to use. EXTRACTION AND FILTERING GROUP 1. Nr.1 filtering unit mod. F320 built in galvanized steel sheet, with dimensions 3500 x 1100 x (h) 4300 mm, running in negative pressure and equipped with nr. 60 antistatic polyester filtering bags with dimensions Ø125 x (h) 1300 (filtring area= 60 m2, grammage= 500 g/m2), with cleaning system by countercurrent compressed-air blasts (ON-LINE). The filter is complete with: · Nr.1 tangential inlet to avoid the direct contact of the waste with the filtering bags, making the filter last longer; Nr. 1 motorized screw conveyor, equipped with a proper motor gearbox, for the discharge of the filtered material towards the opening in the lower hopper; Bodpfxezi Uqmo Amrjlk · Nr. 1 kit for Big-Bag installed under the hopper, complete with rotary valve and level probe for the control of the filling level of the bag; · Nr.1 high-performance fan, designed to run with clear air, equipped with a premium branded Class S1, IP55 code electric motor with a power 7,5 kW; · Control panel for the management of the fan and the cleaning system; Model FC320 Dimensions[mm] 3500 x 1100 x (h) 4300 Installed power [kW] 7,5 - 400v/50Hz Exhaustion system Into a big-bag Filtering bags dimensions[mm] Ø 125 x (h) 1300 Filtering material Antistatic polyester Number of bags 60 Grammage [g/m2] 500 Filtering surface [m2] 60 Sleeves cleaning system Automatic cleaning system with compressed air Air Flow 6000m3/h 1. Instruction and maintenance manual of the filtering unit; 2. Filtering unit conformity declarations with CE marking; 3. Nr.1 automatic fire protection system, composed of: • Nr.1 powder extinguisher; • Diffusing tube with nozzles; • Polymeric tube for fire detection (to be filled with 18 bars nitrogen); • Alarm pressure switch;

Year of construction: 2015, condition: good (used), Output: 1200m3/h Bodpfxjrlm Ebj Amrolk motor: 2.2 kW

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Bledpoxbf Rbofx Amrjk Motor: 5.5 kW Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: good (used), Motor: 2.2 kW Blodpoq U Rbqofx Amrok Extraction capacity: 1800 m3/h

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 2,400 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 2,350 mm, total length: 3,000 mm, total width: 1,100 mm, overall weight: 900 kg, Dust extractor, chip extractor, self-cleaning pneumatic vacuum filter Alko Mobil Power JET 300 The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is mounted on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust generated in various technological processes. Fan power: 7.5 kW Capacity: 6000 m3/h Blsdpfx Ajy A Iwcsmrjk Vacuum: 2400 Pa Connection diameter: 300 mm Air return Stock number: 1130

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. Bljdegyfmaspfx Amrek • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Year of construction: 2024, condition: used, Manufacturer : Russell Model : EF502/0001/BV/BU Year : 2024 Type: Self-cleaning filter (Continuous removal of contaminants from liquid products) ATEX (Ex) class: yes, see photo of motor plate Materials: 316L stainless steel Connection flanges: DN50 – external diameter 165 mm Product inlet: DN40 – external diameter 150 mm Installed mesh size: 800 microns Bsdpfx Aoziqfajmrolk Maximum pressure: 10 bar (20°C) Motor power: 0.13 kW

Condition: excellent (used), functionality: fully functional, Diatomaceous earth filter system for wine, must, and fruit juice. 2,000-15,000 liters of wine per hour. Bljdpfx Aezqtbtjmrjk In very good condition. Condition as shown in the pictures. Selling price: €2,900, negotiable. Please contact me to arrange a viewing.

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Blsdjzkutdopfx Amrok Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Sold complete with 4 Koch pumps and controls