Used Edge Grinding Machine for sale (65,786)

Condition: used, functionality: limited functionality, machine/vehicle number: 118 255, distance between centers: 2,500 mm, year of last overhaul: 2016, The machine is operational and in production use and can be inspected after prior arrangement. Delivery in November 2026. No delivery service is included; dismantling and transport are the responsibility of the buyer. Two 5-ton cranes are available for loading. The sale is made without any warranty or guarantee, and only to commercial buyers, plus VAT; no liability for material defects. Dsdpfoz I T A Ajx Ap Ijku Maximum distance between centers: 2500 mm Maximum height between centers: 250 mm The machine has limited functionality because the feed mechanism occasionally fails to operate. The sale includes the coolant system.

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Maximum distance between table surface and center of the grinding spindle 495 mm Dkjdpsz Ayqxofx Ap Iou Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Grinding spindle drive 5.5 kW

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 Dkedpexaarqjfx Ap Ieu - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: excellent (used), The HEBROCK K36 Airtronic is a used edge banding machine with PC control, a touchscreen, and a pivoting control panel. The zero-joint Airtronic system is complemented by extensive equipment for joining, edge banding, capping, milling, and trimming. Control and Workpiece Guidance: The machine has a program memory and automatic pressure beam adjustment. The feed is controlled by a conveyor chain, and the infeed guide is adjustable by motor. An extendable workpiece support assists with workpiece guidance. The feed speed ranges from 7 to 10 m/min. Workpieces with a thickness of 8 to 60 mm and a minimum length of 200 mm can be processed. Edge Processing and Glue Application: A diamond joining cutter operates in both forward and reverse directions and has a power of 2 x 2.2 kW. For glue application, there is a quick-heating tank, a changing device for glue tanks, and interchangeable glue applicators. The use of PUR adhesives is possible. For roll material, an edge thickness of 0.5 to 3 mm is specified. The support plate for the edge material has a diameter of 850 mm. Post-Processing Units: The trimming saw is equipped with an HF motor. This is followed by a flush-cutting unit and a flush, radius, and bevel cutting unit with pneumatic adjustment. A multi-tool and a multi-radius trimming blade are also included. For trimming blade processing, a flat trimming blade and air nozzles on the radius and flat trimming blade are available. The chip collection box is assigned to the radius trimming blade. A changing motor is available for corner copying; the maximum edge thickness for this is 3 mm. Additional Equipment: The machine has spray devices for release agents, cleaning agents, antistatic coolant, and lubricants. LED lighting is installed in the machine area. The total length is 5,540 mm. With dimensions of 5,540 x 1,210 x 1,450 mm, the machine weighs 1,700 kg. The compressed air connection is specified as 7 bar. Condition: The HEBROCK K36 Airtronic is offered as a used machine. Quality Information: - All settings checked Dodpfx Asymyp Rjp Ioku - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: Dkjdpfx Aswiv Dkep Isu 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: good (used), Code: 0345 Brand: STROMAB Djdpoyxf Ttofx Ap Ijku Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: Dsdpjy T D N Asfx Ap Ioku - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Dodpfxowlbz Tj Ap Isku Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Dedpjz H Iwfefx Ap Isku Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Dodpfoznu Dwex Ap Ieku Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes Dsdpfx Apou Nggzs Ijku - 4 pieces machine base i.D. *

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m Dodpfx Apozdnlae Ieku height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: excellent (used), Year of construction: 2007, Stöckel FX 80/50 ST 2 Surface grinding machine Stöckel FX 80/50 with ST 2 control, year of manufacture 2007, in SUPER condition. CE-compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture 2007 Technical data Clamping area (L x W in mm) 900 x 500 Grindable area (L x W in mm) 800 x 500 Magnetic chuck size max. mm 800 x 500 Grinding wheel dimensions max. mm 300 x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min Dkedpfx Apsz Ipk Ae Ieu 0 – 500 Grinding spindle drive, speed rpm 1900 Power kW 7.5 Machine weight approx.: 4.0 t Accessories and equipment: About the machine: Offered is a surface grinding machine Stöckel FX 80/50 with ST 2 control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for training purposes. It features a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 500 mm make it suitable for toolmaking, fixture construction, and small-series production. The extensive standard equipment and the easy handling of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Stöckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Stöckel on-site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Dkedpfx Apsz Nhr Ns Ieu

Condition: good (used), grinding wheel diameter: 300 mm, type of input current: three-phase, grinding wheel width: 40 mm, overall weight: 1,850 kg, rotational speed (max.): 400 rpm, External cylindrical grinding machine Brand: GER Model: RHL-450 Fagor dimension display Grinding wheel dimensions: 300x40mm Drive: Hydraulic Distance between centers: 450mm Center height: 130mm Dkodpfx Apsz Dv E Ee Iou Maximum workpiece diameter: 250-255mm Workpiece spindle speeds: 55-400 rpm Motor: 3Hp Weight: 1850kg

Condition: excellent (used), SCM internships in excellent condition Dodpfx Apot Hkq Rs Isku

Condition: used, Year of construction: 1987, grinding length 1250 mm grinding width 400 mm workpiece height 550 mm table surface area 1750 x 500 mm dimensions of grinding wheel 400 x 50 x 127 mm 1250 x 600 mm grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 13,8 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,4 x 2,4 m Surface grinding machine - Magnetic grinding wheel - Coolant system - Documentation Dedpfx Aey Ezz Tsp Ieku

Condition: used, Year of construction: 1998, grinding diameter 350 mm Dodjz Ikvgepfx Ap Ioku grinding length 1000 mm centre height 175 mm Überholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware Antriebe,Motoren,Maßstäbe aus Originalmaschine. Werkstückspindelstock nur umlaufend mit 320Nm numerisch gesteuerte B-Achse Innnschleifeinrichtung Dia 120mm HF-Spindel Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 400mm Innenschleifeinrichtung für HF Spindeln Reitstock mit Mikroverstellung KEL SET Messsystem Aktiv-Längspositionierung Kel-Pos Anschnitt-Sensor Marposs

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Dkjdpfxou Ngxdo Ap Iju Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s Dkedpfxju Ng Avj Ap Iou total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Documentation i.D. *

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Dkodpfsycpv Sox Ap Iju Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Dkjdpfx Ajzx Nynop Ieu Further information: The machine can be viewed while powered up.

Condition: good (used), Surface grinding machine Manufacturer: Harig Stock number: 2965-4 Year of manufacture: Machine number: Type: Super 612 Djdpfxsz Hzyyo Ap Isku Grinding length: 300 mm Grinding width: 175 mm Table clamping surface: 300 x 150 mm Magnet: 250 x 120 mm Vertical adjustment: 250 mm Table movement, longitudinal: 330 mm, manual Table movement, transverse: 175 mm, manual Spindle speed: 3,600 rpm Grinding wheels: 200 x 20 x 51 mm Connection: kW Accessories/Equipment: Condition: good Weight: t Dimensions: 870 x 900 x 1,900 mm

Condition: used, Year of construction: 1981, functionality: fully functional, Surface Grinding Machine JONES & SHIPMAN 540 L Travel X: 406 mm Travel Y: 470 mm Travel Z: 168 mm Year of construction: 1981 Magnetic chuck dimensions: Length 355 mm x Width 150 mm Grinding wheel diameter: Ø 180 mm Spindle motor: 2 speeds motor Motorised raising/lowering Equipped with: Lubricant tank Voltage: 220 V Tri Dimensions (L x W x H): 1300 x 1300 x 1900 mm Total width with lubricant tank: 2000 mm Weight: approx 1,2 T Dkodpfjz H Rzmsx Ap Iou

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories Dkedpfx Aemmdhrsp Iju MARCELS MASCHINEN CH