Used Electronics Industry for sale (34,655)

Condition: like new (used), Year of construction: 2025, operating hours: 1,500 h, functionality: fully functional, pressure: 12 bar, total height: 2,896 mm, total length: 12,192 mm, total width: 2,438 mm, empty load weight: 14,000 kg, Mobile containerized steam boiler plant 2,000 kg/h • Configuration: Mobile containerized steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: Steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2″, including gas filter, pressure regulator, operating and safety valves, and valve tightness monitoring. • Controls and automation: Valiantec, equipment for 72-hour operation without continuous operator attendance, modulating water-level control, Gestra TDS/BAE automatic TDS blowdown, and Crotti pneumatic bottom blowdown. • Feedwater pumps: 2 × Grundfos CR3-27. • Feedwater tank / atmospheric deaerator: DGSA 1500 FS, capacity 1,500 liters, AISI304 stainless steel, with steam heating and temperature control; specified water temperature 85–95°C. • Water treatment: A water softening system is not included in the scope of supply but can be supplied and installed at the buyer’s request, subject to separate agreement. Dsdpfxsz Ix Svj Acpscn • Blowdown cooling system: 250-liter AISI304 blowdown vessel with automatic cooling control. • Pipework and fittings: thermally insulated pipework, isolation and non-return valves, and steam traps. • Flue: insulated DN450 stainless-steel flue system. • Safety equipment: water-level and pressure safety devices, two safety valves, LPG and smoke detection, alarms, emergency shutdown, automatic gas shut-off, and ventilation. • Container footprint: 12,192 × 2,438 mm – length × width. • Connections: DN80 steam outlet, DN65 gas inlet, 1″ water inlet, DN80 blowdown vessel drain.

Condition: used, Available quantity: 6 units. Used power component / industrial electronics module from Alstom Cegelec for industrial automation and drive technology. Manufacturer: Alstom Cegelec Model: Minisemi-D 380 415 160 Manufacturer's part number: 029.135 724 Dodpfx Acjzgf E Aepjcn Version: GO V3.1 Device type: Power electronics module Application area: Industrial automation Condition: Used

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 Dsdpozxqtpjfx Acpjcn - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, Nova Gas Industry – Nitrogen 5.0 at an Unbeatable Price Nova Gas Industry offers modern and cost-effective solutions for on-site production of Nitrogen 5.0 and customized gas mixtures. Our systems combine the highest gas quality with maximum operational efficiency, providing an outstanding price-performance ratio. With more than 200 successfully installed systems across Europe and Asia, we have extensive experience in the design, engineering, and implementation of nitrogen generation systems for a wide range of industrial applications. Our systems are built with high-quality components, robust engineering, and a maintenance-friendly design. This helps reduce maintenance requirements and ensures high system availability for many years. Another key advantage is energy efficiency. Thanks to an optimized air factor and modern PSA technology, nitrogen can be produced reliably and economically directly at the customer’s site. This significantly reduces dependence on external gas deliveries and the associated transportation, logistics, and storage costs. An intelligent monitoring system enables continuous monitoring of all important operating parameters. System status, gas purity, pressure, and other relevant process data can be monitored at any time. This keeps your nitrogen production under control and allows you to respond quickly to any deviations. Every system is individually designed according to the customer’s requirements – from gas capacity and purity to operating pressure and specific operating conditions. Nitrogen 5.0 or Gas Mixtures – Maximum Quality, Minimum Operating Costs Nova Gas Industry provides high-purity Nitrogen 5.0 as well as customized gas mixture solutions for demanding industrial applications, particularly in laser cutting, metal processing, electronics, food processing, and manufacturing. Through energy-efficient system design and modern technologies, significant energy savings can be achieved depending on the application and system configuration. Our customers benefit from: * High-purity Nitrogen up to 99.999% * Low energy consumption * Maintenance-friendly system design Djdpfjxrcauox Acpecn * High system availability * Customized engineering and project solutions * Attractive investment and operating costs Nova Gas Industry – More than 200 successfully installed systems in Europe and Asia. Nitrogen 5.0 and gas mixture solutions – reliable, efficient, and economical.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. Dsdpfx Acszl N Tuspecn If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R05120, Electronic measuring roll line from Fom Industrie, QUOTA GB ALU model, 4.2 m long, for aluminum glazing beads, manufactured in 2026. Supplied with measuring rod, Bluetooth receiver, and a stand with charger. Dcedpfx Aez Ngiajcpen

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R05119, Electronic measuring roll line from Fom Industrie, QUOTA GB ALU model, 4.2 m long, for aluminum glazing beads, manufactured in 2026. Supplied with measuring rod, Bluetooth receiver, and a stand with charger. Dedpfoz Ngigjx Acpecn

Condition: excellent (used), Epson G10-854SR 4-Axis SCARA Industrial Robot Epson SCARA G10-854SR A SCARA robot with an impressive payload of 10 kg, without compromising on speed or accuracy. High payload without compromise Thanks to their high arm stiffness, the SCARA robots in the G10 series can move heavy loads at high speed. They are fast in any application, whether in manufacturing and configuration or in handling with multiple grippers. In particular, they are the ideal choice for applications such as the assembly of heavy parts, packaging and palletizing, and loading and unloading. High performance in a compact design The SCARA robots in the G10 series are among the most powerful robots in their performance class and impress with an outstanding range of motion while maximizing space utilization. They offer cycle times as low as 0.34 seconds, even over extended periods of operation. The unique arm design with high stiffness ensures very low residual vibration, with smooth start and stop movements even at high speeds. Outstanding versatility The robots in the G10 series are the ideal solution for applications where high speed and maximum accuracy are required. For example, they are suitable for the manufacture of mechanical and electronic components, the placement of parts (including small parts), and for dispensing and feeding. * Payload of up to 10 kg without compromising on speed * Working range comparable to that of larger robot arms * Cycle times as low as 0.34 seconds, even over extended periods of operation * Epson complete solution consisting of robot, controller and software * Ideal solution for a wide range of applications, from automotive to pharmaceuticals Djdpfxoibx S Ne Acpocn Technical data Type: SCARA (4-axis robot) Payload: nom. 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360 ° Horizontal repeat accuracy: +/- 0.025 mm Vertical repeat accuracy: J3: +/- 0.01 mm Orientation repeat accuracy: J4: +/- 0.005 ° Max. operating range: Axis 1: +/- 152 °, Axis 2: +/- 152.5 °, Axis 3: 420 mm, Axis 4: +/- 360 ° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Ø outside: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m "One-stop shop: We would be happy to offer you a suitable bank financing option for your project." You can find more robots in other sizes – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Dcjdpfx Ajzy Hktocpon Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Dodpfx Acszy Hd Hepjcn Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Condition: excellent (used), Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes the proven, configurable standard weighing programs: · BASIC for simple weighing systems · COUNT for piece counting · CHECK for simple check weighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be made from the PC via the IT3000 Configurator or directly via the network using a web browser. After each weighing, the weight, date, time, and entered data can be saved directly to a file on the PC hard drive via Ethernet. No special PC software is required for this. In ONLINE mode, the IT3000 can be remotely controlled from the PC via the Ethernet interface. The command set includes weight query, tare, zeroing, and dialog functions. Any overload of the scale and other malfunctions are stored in an error table with date and time and can be viewed via a web browser. With integrated, calibratable weight memory, optionally with calibratable weight memory on the PC hard drive. Operation Operator guidance via a 20-character backlit clear text display, data entry via numeric and function keys under acid-resistant foil. Weighing Electronics Dcjdpfjzp Uybox Acpsn Integrated measuring amplifier for connecting up to 8 x 350 Ohm strain gauge load cells, 4- and 6-wire technology Calibration as a single-range or multi-range scale and as a single- or multi-division scale Calibratable resolution of 6,000d at max. 80% pre-load, internally 524,000d 50 filtered measurements / second Calibration is performed either on the IT3000 via display/keyboard or via the Ethernet interface. Ethernet Interface Integrated Ethernet interface, RJ45 with adjustable IP address for 10/100BASE-T networks. Configuration with PC software ′EtherPort Tool′ via the network. Security Data stored in a network-failure-proof manner Password protection. Interfaces One serial interface as an option (RS232, RS485, or 20mA CL passive), for connecting a printer, remote display, or reference scale. Digital inputs and outputs PIM module with 2 digital 24V inputs and 2 digital 24V outputs as an option. Connection Values 110 (–15%) – 240 (+10%) VAC; 50/60 Hz, Power consumption max. 15 VA; Option: 12 – 30VDC. Operating Temperature –10°C to +40°C at 95% relative humidity, non-condensing. Options / Accessories Ethernet connection cable Protective cover PC software PC COM+ communication object for online operation PC software PC ARCHIVE for calibratable storage of weight data on the PC hard drive. More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Dcjdpfxozy Euwj Acpjn You can find technical details in the PDF attached document.

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Dodpozy E Drofx Acpocn Technical specifications can be found in the attached PDF document.

Condition: used, This listing is for the Heathrow Scientific HS120000 Electronic Counter. The unit is in full working condition and ready for immediate use. Designed for precise and efficient counting applications, it features a clear digital display and user-friendly interface, making it ideal for laboratory and industrial environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Djdpoyyb Ehsfx Acpocn • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws Dcodsz I Uckjpfx Acpen - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: like new (used), Year of construction: 2017, operating hours: 267 h, functionality: fully functional, KUKA KR10 R1100 sixx KRC4 robot 2 units available (267 + 273 operating hours) Year of manufacture: 03/2017 Color: orange Number of axes: 6 Djdpfxjz I Nqie Acpscn Max. payload: 10 kg Max. working range: approx. 1100 mm Scope of supply: Robot, controller, cables, teach pendant Price is per robot. Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: like new (used), Year of construction: 2016, operating hours: 4,487 h, functionality: fully functional, Universal Robots UR5 collaborative robot, complete, approximately 4,487 operating hours. Year of manufacture: 11/2016 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: Robot, controller, cables, teach pendant Used – shows normal signs of wear. Further details, article numbers, and images available upon request. Dcedpfxjz I Rals Acpen Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: like new (used), Year of construction: 2017, operating hours: 1,407 h, functionality: fully functional, Universal Robots UR5 CB3 collaborative robot, complete, manufactured 5/2017 Approximately 1407 operating hours only Year of manufacture: 5/2017 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Dsdpfx Ajz I Rdkocpjcn Two weeks start-up warranty. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – Please specify country, city, and postal code. Forwarding costs on request – Please specify delivery address.

Condition: not inspected (used), Year of construction: 2015, operating hours: 14,500 h, functionality: unexamined, overall weight: 70 kg, load capacity: 8 kg, arm reach: 400 mm, pivoting range: 360 °, controller manufacturer: Stäubli, controller model: CS8C, teach pendant manufacturer: Stäubli, teach pendant model: SP1, control cabinet width: 445 mm, control cabinet height: 455 mm, input voltage: 230 V, input current: 16 A, repeat accuracy: 0.01 mm, For sale is an industrial SCARA robot system from the quality manufacturer Stäubli. This system is characterized by extremely high precision and speed and is in good, well-maintained condition. The package is complete and consists of the robot arm, the matching controller, and the handheld operating device. The robot was only used for a few hours in our company for a test project. Technical data & system components: Robot type: Stäubli TS40 (4-axis SCARA robot) Controller: Stäubli CS8C Operating device (teach pendant): Stäubli SP1 Manual Control Unit Operating hours: Only 14,576 hours (very low operating hours for this system) Dsdpfx Acjzl Nq Tjpscn Condition: Used Error-free system status: The controller starts up absolutely error-free. Low operating hours: With just over 14,500 operating hours, the system still has a large part of its life cycle ahead of it. Complete package: Including all necessary connection cables (as shown in the pictures). Legal note: Sale is ex-works, excluding any warranty (sold as seen, ideal for B2B / commercial / export). Shipping/collection: Shipping can be arranged, but must be paid for by the buyer. The system can be viewed by prior arrangement. If you are interested or have any questions, please send us a message or your price offer.

Condition: good (used), Year of construction: 2017, operating hours: 9,257 h, functionality: fully functional, machine/vehicle number: 702403, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, This is a KUKA KR 30-3 industrial robot with a KRC4 controller, manufactured in 2017. We would also be happy to offer this robot as a fully refurbished unit! The controller includes the following options: Dcedpfx Asz I Styecpjn BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kawasaki RS05L robot with E-Controller and enclosure Control system: E-Controller Number of axes: 6 Max. payload: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: Robot, control system, cables, teach panel, circuit diagrams, floppy disk drive for data backup. Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address. Dodpfx Acsz I R D Dopocn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Kawasaki CP300L-A Palletizing Robot with E-Controller Profibus Palletizing Robot Control System: E-Controller Profibus (Model: E03E-A001, S/N CP3000003) Number of Axes: 4 Max. Payload: 300 kg Max. Working Range: 3255 mm Year of Manufacture: 2/2015 Dedpjz I N Rcofx Acpecn Scope of Delivery: Robot, Control System, Cables, Teach Pendant Used – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Yaskawa Motoman ES 165N NX100 robot with Euromap 67 interface Controller: NX100 Max. payload: 165 kg Max. working range: approx. 2651 mm Used – normal signs of wear. Dodpfx Ajz I N D Ascpjcn Further details, article numbers and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available from stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to abroad upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Fanuc LR Mate 200iC/5L R30iA robot Controller: R30iA Year of manufacture: 11/07 Number of axes: 6 Maximum payload: 5 kg Maximum working range: approx. 892 mm Scope of delivery: Robot, controller, cables, teach panel Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex-works. Dedsz I N H Dopfx Acpscn The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Local pickup in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please provide the delivery address.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Yaskawa Motoman MH50 DX100 robot – complete Controller: DX100 Max. payload: 50 kg Max. working range: approx. 2061 mm Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Dcodpfx Acsz I Rzpepsn Used – shows normal signs of wear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.