Used Emb Wittlich for sale (495)

Condition: excellent (used), Year of construction: 2018, Storage platform in bolted design Modularly expandable at any time Platform supports made from galvanized Sigma profiles Permissible surface load 500 kg/m2 Make: BITO Type: C-perforated profile Year of construction: 2018 approx. 187 m² Floor + 1 storage level = approx. 374 m² Floor area: 7,170 x 26,080 mm Ncodjv Nkc Nepfx Ahfsu 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, Bito system construction platform Multi-storey Due to the modular design, the platform can also be set up and used as a single-storey platform. The goods elevator can be purchased as an option. Multi-storey system from Bito For large product ranges and high picking capacities Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage area. At the same time, the height of the warehouse is optimally utilized The integration of shelving racks enables direct access to all unit loads, even if your product range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving items on lower levels, slow-moving items above), which significantly increases the efficiency and speed of your warehouse management Ncedpfx Aovi H Emehfsu Make: BITO Type: C-perforated profile Year of construction: 2020 per floor: approx. 218 m² Floor + 2 storage levels (ground floor/1st floor/2nd floor) 654 m² Floor area: 9,964 x 21,939 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. NEW ! Ncjdpfx Asiyqilohfju We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, membrane for HMD-G-80-1000 ABEL pump NEW ! Ncodpsizt Ryefx Ahfeu We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, membrane for HMD-G-50-0500 ABEL pump Ncjdpeizt Rvefx Ahfou NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: used, System: Membrane-mix filter press Type: Membran-Mix 1000/70 Design: Side beam guided Nedpfx Ahjwy H I Iefscu Year of manufacture: 2012 Model No.: SE1000CRD Filter plate format: 1000x1000 mm Number of plates: 70 Filter plates: PP Cake thickness: 40 mm Filter cloths: optionally available, adaptable to the medium Pressing volume: approx. 1600 dm3 (unpressed) Filtration pressure: approx. 15 bar Closing pressure: approx. 380–410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspection of the systems at our plant by prior arrangement.

Condition: used, Plant: Membrane filter press used Type: REWA - 2 identical machines available Application: Sludge dewatering Design: Side beam Njdpfx Ahsrnnr Rjfocu Filter plate format: 1200x1200 Number of plates: 70 pieces / membrane mix Filter plates: PP Filter cloths: optionally available to suit the medium Filter area: approx. 320 m2 Press capacity: approx. 2050 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or hire: Viewing of the systems by arrangement at our factory.

Condition: new, Pressure gauge, pump monitoring device for ABEL pumps, NEW. We need the pump type / series and the machine number from you. Most spare parts available from stock. Your reliable service partner and spare parts supplier for ABEL pumps. Ncjdpjiyp R Hjfx Ahfsu

Condition: new, membrane for HMD-G-32-0250 ABEL pump Ncsdpfeizt R Djx Ahfeu NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: used, Plant: Used membrane filter press Type: Passavant Noggerath Application area: Sludge dewatering Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Filter plates: PP Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility. Nodpfx Ahswy H Nrjfscu

Condition: new, Membrane for REWA ABEL piston diaphragm pumps. Diaphragm pumps separate difficult media from the driving pump mechanism. An advantage of the piston diaphragm pump is that the fluid and hydraulic fluid are completely separated and do not come into contact with each other. We supply you with diaphragms (Abel spare parts) for all Abel / REWA pumps in known production quality with an above-average service life. Ask us Ncodpfxjd Hghke Ahfeu

Condition: new, axle configuration: 2 axles, loading space length: 6,600 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/65-22,5, wheelbase: 1,360 mm, Year of construction: 2026, = Additional options and equipment = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 4-288 PAVIC building materials central axle trailer (tandem) for construction material transport * Ride height unladen approx. 1,230 mm * Axle loads: 18,000 kg (2 x 9,000 kg) * Coupling height (center) approx. 800 mm unladen * Chassis width approx. 2,480 mm (outer frame to outer frame) * Chassis length approx. 6,600 mm * Three-sided forklift bump protection (left, right, rear) * 1 set of front landing gears, single-side operation, make as per system of choice * 1 set of rear drop-down supports, height-adjustable * Drawbar eye ø 50 mm (18 t gross weight = 14 t payload) ->> Optional ø 40 mm drawbar eye = reduced to 14 t gross weight = 10 t payload * Axle spacing approx. 1,360 mm * Lifting and lowering device with 1 rotary slide valve * Kinnegrip stanchions K20, height approx. 1,000 mm (lever in stanchion) * Sideboard height approx. 1,000 mm * Side board with integrated interior sliding/step accesses (extra wide) * Tailgates with lifting aid (except at the rear) Ncodpfxjylx A Ho Ahfeu * Front wall approx. 1,200 mm high, with sheet metal cladding * Anti-slip plywood floor, thickness 27 mm * Lighting system: all lights LED version Financing / hire purchase, as well as leasing / partial amortization leasing, is available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and modifications. = Further information = General information Year of manufacture: 2026 Axle configuration Tire size: 385/65-22.5 Brakes: disc brakes Suspension: air suspension Weights Unladen weight: 4,000 kg Payload: 14,000 kg gross vehicle weight: 18,000 kg Functional Body manufacturer: PAVIC Building Materials Premium Body Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: like new (used), We sell an automatic machine to cut vaseline for embroidery. Ideal for high volumes shops using, ZSK, Tajima, Barudan, Brother, Happy machines. High end and easy to operate, huge savings on labor/material Completely programmable Rare Ncodpfxoxz S Tvo Ahfou

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock Nodpfxovkf Aae Ahfscu We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Njdpfsvhctwsx Ahfscu Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Njdpfx Ahswxad Tefscu

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min Nedecxb Nmepfx Ahfscu max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: excellent (used), Small ice cube factory currently situated within national football stadium. This system was designed to supply ice for the national football stadium. We do not have any documentation currently but think it consists of 4 x 1000Kg Ziegra units set up as two double ice machines each dropping in to two mobile hoppers. The system is in excellent condition as it was only used for a short time before it was apparent that it was easier to buy the ice in and have it delivered direct to each catering outlet in the stadium. The machines are badged Williams Refrigeration (the supplier) and Manitowok but look like they are Ziegra units. Nsdpstpc T Ssfx Ahfecu

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min Ncedszgc Ibspfx Ahfsu

Condition: used, Technical data: - Manufacturer Leif & Lorenz Nodpfxjzf N Eke Ahfecu - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Condition: new, Work and assembly table New unit Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a workbench top made of selected, solid red beech wood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise – even with asymmetrical loading of the table top. TECHNICAL DATA Workbench top without clamps: 1,700 x 640 x 120 mm 2 clamp keys: Front clamp made of solid cast/steel construction, rear clamp robust aluminum guide (with adjustable guide prism and plastic sliding guide) Table top thickness: 120 / 60 mm Useful stroke: 300 mm Overall height ErgoPlan: 780 mm Weight of the workbench top: approx. 95 kg Weight: approx. 240 kg The attached panel on the back serves as a protective cover against shearing and as a crush protection cover. The lifting unit is concealed in the left lifting column and is therefore protected from dirt and damage. Load capacity up to 400 kg Overall height max. 1080 mm 2 bench hooks Ergoplan, consisting of aluminum round bench hooks with ball lock 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing pin, adjustable up to 200 mm workpiece thickness, 360° swiveling Availability: short-term Location: Flörsheim Ncedpfx Ahjkwhwzsfsu

Condition: new, Work and assembly table Worktop made of solid sheet metal equipped with high-quality workbench (can be removed using screws) Easy back-friendly work thanks to height adjustment using a foot pedal Perfectly aligned using the 4 adjustable feet, very easily using an Allen key Continuous height adjustment and 3 fixed working heights Optimal handling thanks to 4 swivel castors with parking brake Regional quality From conviction - 5 year guarantee Load capacity 300 kg Height 400 - 1010 mm Worktop length 1485 mm Worktop 1700 x 790 mm Useful stroke 610 mm Weight 140 kg Front pliers 520 x 70/190 mm (size/span) Side pliers 460x140/145 mm Ncodpfx Asvymfhshfeu (size/span) Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1988, total height: 1,000 mm, total length: 11,200 mm, total width: 2,100 mm, Colour: Blue Empty weight: 2.500 kg - Year: 1988 - Documentation available: No - CE certificate present: No Ncjdpfszfgpysx Ahfeu - Serial number: 0309204 - Lifting capacity [kg]: 4000 - Span [mm]: 10500 - Girder: Single - Crane control: Fixed cable - Transport dimensions: 11200mm x 2100mm x 1000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Quantity: 6 units Functionality tested; item comes from the dismantling of equipment from an automotive supplier. Manufacturer: ADLINK Type: MXC-6321D(G) Fanless Embedded Box PC Processor: Intel Core i7-3610QE (QM77) Nsdjzd N Rkjpfx Ahfocu Expansion: 3 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I (3 independent displays) Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Memory & Mass Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), DDR3 (max. 16 GB) Input voltage: 9–32 V DC Protection & Operation: Fanless, -20 °C to +55 / +60 °C (with option) Weight: approx. 4.3 kg

Condition: used, Functionally tested; item originates from the dismantling of equipment from an automotive supplier. Quantity: 4 units Manufacturer: ADLINK Type: MXC-6312D(G) Fanless Embedded Box PC Nedpfx Aozd N Enohfecu Processor: Intel Core i5-3610ME (QM77) Expansion: 1 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Memory & Mass Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), 4 GB DDR3 (up to 16 GB) Input voltage: 9–32 V DC Protection & Operation: Fanless, -20 °C to +60 °C (with option) Weight: approx. 3.8 kg