Used Emb Wittlich for sale (500)

Condition: used, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2015, loading space length: 7,250 mm, loading space width: 2,470 mm, loading space height: 2,580 mm, loading space volume: 46 m³, Equipment: ABS, tail-lift, Galliker ST 2A Platform Curtain Side with Drop Sides, Through-loading System, Tail Lift Hedpfoxzl T Nex Abrjfc Internal ref. for inquiries: 1124890 * Body manufacturer: Galliker * Type: ST 2A * Platform with curtain side * Through-loading system * Reversing camera * ABS * 2 axles, air suspension * BPW Eco Plus axles * Edscha sliding roof * Aluminium underride guard * Drum brakes * Drop sides / aluminium * Lashing rails left / right * Edscha sliding roof Interior dimensions: * Length: 7,300 mm * Width: 2,470 mm * Height: 2,580 mm Tyres: * Front axle: 435 / 50 R 19.5, air suspended / 35% * Rear axle: 435 / 50 R 19.5, air suspended / 35% ----Price: €9,900 + 19% VAT. For further questions, you can reach us at the following telephone numbers: We speak German, English, French and ????? Subject to errors, omissions and prior sale.

Condition: good (used), functionality: fully functional, SHIPPING AVAILABLE 🚚 - Brand: Timmer - Part no.: 53508140 (replaced by 53508299) - Max. flow rate approx. 65 l/min. - Pressure ratio 3:1 - Housing in contact with the product: Aluminum - PTFE composite diaphragm - Valve ball seats: Stainless steel - Valve balls: Stainless steel Hedpfx Abot Hfa Tsrofc - Seals: FEPM - Side parts: Stainless steel - Brand NEW product - Shipping or store pickup available - VAT 21% NOT included (deductible for professionals)

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C Hfodpfx Absff Agisrjc SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: used, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, Year of construction: 2020, Equipment: ABS, Air, lift, BPW-disc, EBS, aluminum drop-leg, PVC half-shell mudguards, 2x WZK, side underrun protection right, climbing ladder, foldable underrun protection made of aluminum, reflective sign, aluminum rims, loading pressure gauge, aluminum trough, floor 10 mm, wear plate on floor 7 mm, side walls and front wall 7 mm, side wear plates, rear wall 10/5 mm mounted, Cramaro tarpaulin frame Hedpfxswqaupj Abrofc

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Hodjxaigkepfx Abrefc

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Hodexaigqopfx Abrjfc

Condition: ready for operation (used), functionality: fully functional, The TSI Turroques Serge Industrie embosser offers a reliable solution for the continuous shaping of semi-firm food products. It is designed for workshops seeking a stable operating rate, consistent shaping, and controlled visual quality. Thanks to its robust food-grade stainless steel construction, it is ideally suited for environments that adhere to strict hygiene standards. Additionally, its mechanical architecture supports prolonged use, maintaining high productivity without performance loss over multiple cycles. Hedpfx Absxrtpaorofc The machine also ensures shape consistency, enhancing the final product’s appearance. This regularity simplifies subsequent cooking, packaging, or presentation processes, as each piece maintains a uniform size. Furthermore, reduced variation helps minimize material waste and weight discrepancies, positively impacting the overall profitability of the production line. As a result, the embosser optimizes process stability and directly contributes to production efficiency. Its design allows for straightforward integration into existing production lines, either upstream or downstream of other equipment such as fillers, conveyors, or packaging systems. This flexibility enables adaptation to different formats, textures, or recipes without major modifications. Easy access to cleaning areas reduces maintenance time and minimizes production downtime. Ultimately, the embosser quickly becomes a strategic asset for workshops aiming to improve process consistency while offering simple and intuitive daily operation. Technical specifications: Height: 1700 mm Width: 600 mm Length: 2340 mm Year of manufacture: 2021 Cylinder diameter: 95 mm Registration: 235EM

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting Hjdpfx Aboxn Ebmjrjfc * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 4,100 mm, total length: 9,300 mm, table width: 1,800 mm, table length: 7,200 mm, number of rollers: 2, For Sale: New 12-Head Universal Roll-to-Roll Embroidery Machine (ZSK) This cutting-edge 12-head portal embroidery machine is engineered for professional roll-to-roll use, offering outstanding precision, efficiency, and versatility for high-volume textile manufacturing. Key Features: - 12 Heads, Each with 12 Needles – Features 400 mm head spacing and automatic head selection for efficient workflow. - Cording Functionality – Equipped with 6x EP1.2 cording devices (mounted on heads 1, 3, 5, 7, 9, 11) for advanced decorative stitching. - C-Shaped Frame – Optimized for seamless fabric transport and collision-free operation. - Dual Roll-to-Roll Feeding – Supports simultaneous processing of two materials with left-to-right controlled feed. - Max. Roll Diameter: 600 mm, Max. Weight: 60 kg, Core Diameter: 76 mm. - Upper Roll: Actively driven for precise fabric tensioning. - Lower Roll: Equipped with a high-precision braking system. - Edge Control – Automatic system for consistent fabric alignment. - Adjustable Working Width – From 1,400 mm up to 1,700 mm to suit various projects. Hfedpfx Ajxcnl Robrsc - Clamping & Stretching – Pneumatic aluminium clamping on all four sides for two materials, max. frame size 1,800 mm x 7,200 mm. - High-Speed Embroidery – Capable of up to 900 stitches per minute for rapid production. - Advanced Controls – T8-3 machine controller, automatic bobbin changing system with 2 magazines per head (8 bobbins per head). - Safety & Monitoring – Integrated light barriers (top and bottom) with clear red/green status indicators. - Professional Digitizing – Includes EPCwin CAD software for embroidery design and programming. This machine delivers high productivity and reliable automation, making it an optimal investment for industrial textile manufacturers seeking top-tier output and consistent quality results.

Year of construction: 2019, condition: excellent (used), KAESER / TE 121 and BSD 72 Compressor system and dryer and with distribution system to machinery S-COM-005 TESEOAIR / HBS50 15 Bar Hfsdpfovzhgiex Abrec Compressed air system HBS50 max 15 Bar - 220 Psi - Max 15 MPa S-COM-008

Condition: excellent (used), Year of construction: 2018, Storage platform in bolted design Modularly expandable at any time Platform supports made from galvanized Sigma profiles Permissible surface load 500 kg/m2 Make: BITO Type: C-perforated profile Year of construction: 2018 approx. 187 m² Floor + 1 storage level = approx. 374 m² Floor area: 7,170 x 26,080 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Hodev Nkc Nepfx Abrjfc Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, Bito system construction platform Multi-storey Due to the modular design, the platform can also be set up and used as a single-storey platform. The goods elevator can be purchased as an option. Multi-storey system from Bito For large product ranges and high picking capacities Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage area. At the same time, the height of the warehouse is optimally utilized The integration of shelving racks enables direct access to all unit loads, even if your product range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving items on lower levels, slow-moving items above), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-perforated profile Year of construction: 2018 per floor: approx. 187 m² Floor + 2 storage levels (ground floor/1st floor/2nd floor) 561 m² Floor area: 7,170 x 26,080 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Hsdpfx Absvi H Hdjrefc Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, Bito system construction platform Multi-storey Due to the modular design, the platform can also be set up and used as a single-storey platform. The goods elevator can be purchased as an option. Multi-storey system from Bito For large product ranges and high picking capacities Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage area. At the same time, the height of the warehouse is optimally utilized The integration of shelving racks enables direct access to all unit loads, even if your product range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving items on lower levels, slow-moving items above), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-perforated profile Year of construction: 2020 per floor: approx. 218 m² Floor + 2 storage levels (ground floor/1st floor/2nd floor) 654 m² Floor area: 9,964 x 21,939 mm Hsdsvi H Emepfx Abrjfc 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Hfodpfxovkf Aas Abrec Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Hjdpfx Abewxad Terofc

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F2101146, F2000 AUTOMATIC CARTON ERECTOR Hfodpeu Tk A Sefx Abrec CARTON DIMENSIONS: - Length : min. mm. 220 - max. mm. 600 - Width : min. mm. 100 - max. mm. 500 - Height : min. mm. 100 - max. mm. 500 TECHNICAL DATA: - SPS Siemens S71200 control - Output: 840 cartons/min (depending on length and quality of carton) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start / stop by photocell - Venturi vacuum system: 25m3 /h 700mm HG - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Degree of protection IP 54 - Compressed air 6 bar - Air consumption 22 nl - Working environment + 5° C - max. +35° C - Working height 650 mm adjustable +30 mm - Weight 490 kg - Machine dimensions mm. 1.535 x 2.125 x 2.105H - CE safety protection The machine includes a GEM B52 carton sealer. GEM B52 CARTON SEALER WITH SIDE DRIVE BANDS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length : min. mm. 150 - max. mm. ∞ - Width : min. mm. 100 - max. mm. 500 - Height : min. mm. 100 - max. mm. 500 TECHNICAL DATA: - Drive & guide belts Vertical - Carton size adjustment Manual - Bottom sealing unit - Standard version T22 / T23 - Tape width From 38 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1000 cartons/hour - Working height 650 mm - Weight 85Kg - Machine dimensions (L x W x H) mm. 900 x 880 x 1.750H - CE safety protection: side sheet metal covers with access door, upper and lower covers covers (mandatory in combination with F1000/F2000/F2008) Illustration may contain options subject to surcharge

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Hfedpfx Ajvhctwsbrsc Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, mileage: 3,034 km, power: 85 kW (115.57 HP), first registration: 10/2023, fuel type: electric, maximum load weight: 445 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 3,400 mm, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space volume: 3 m³, loading space length: 4,250 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it is based on the current daily exchange rate. The applicable currency is that of the vehicle location. Wheel configuration 4x2, automatic transmission / automated gearshift, anti-lock braking system (ABS), single cab, payload 2 t, gross vehicle weight up to 6 t, wheelbase 3400 mm, heated mirrors, leather steering wheel and leather gear knob, air conditioning, double passenger seat, reverse warning system, cruise control, driver airbag, central locking, navigation system. Hjdexmwcmspfx Abrefc

Year of construction: 2022, condition: like new (used), functionality: fully functional, High-speed oven in stainless steel, Mod. ORACGB - Oracle Boosted Model Purchase date: 2022/Week 42 Manufacturer: LAINOX Dimensions (W x D x H): 467 x 609 x 630 mm Connected load: 6 kW Voltage: 400 V Microwave power: 2 kW Cooking chamber volume: 17.9 l Standard equipment: Cooking plate Aluminum spatula OWB - Oracle Washable Box Non-stick label for the inner door Wi-Fi connectivity Ethernet connection USB port Power cable (2 m) Hedpfx Aboxf Dl Sjrjfc

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Hfodpfxsv T Uvzo Abroc Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Hfsdpfx Aecxb Nmobroc Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Hfsdpoxl Hxbofx Abroc Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Hsdsx Srwfepfx Abrefc Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg New - unused

Year of construction: 1991, condition: used, machine/vehicle number: 5385, comprising: Magazine loader SIEMENS, year of manufacture: 1991, serial no.: 5385, ERSA ERS 503 reflow oven, serial no. 8596-003, rated power 38 kW, PCB conveyor ALL SMT C-100LD-2-L, year of manufacture: 2016, width: approx. 100 cm, weight: 90 kg, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040561, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040560, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, including magazine trolley, PCB conveyor NUTEK NTM410L-350-1, year of manufacture: 2014, width adjustable, stencil printer (solder paste printer) DEK Horizon 03, serial no.: 282950, year of manufacture: 2004, de-magaziner SIEMENS, serial no.: 5385, year of manufacture: 1991, incl. accessories such as feeders and PCB magazines. Hfsdoyidkuopfx Abrjc

Condition: used, Power: 33 kW Max. workpiece size: 2,320 x 1,010 mm Hedpfjw Na Ulox Abrsfc Available: 2 Orma PM/AFT membrane press for coating one-sided profiled workpieces with automatic loading and unloading system.