Used Engel Es for sale (265)

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Dsdeu Awalopfx Afnskh Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Dodjv Extzspfx Afnokh

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Dksdpfx Aoiiv Aqofneh

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm Dedeyf H Nnspfx Afnekh • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm Dkedpeyf Htyjfx Afneh • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g Dkjdpfx Afsyfrb Nenjh • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Dkodpfx Afsyak A Ijnjh Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Year of construction: 2005, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg Dksdpfei Aqa Aox Afnjh

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle Dsdpjfnqapsfx Afnskh for ENGEL injection unit size ES3550

Condition: used, Year of construction: 2001, operating hours: 36,589 h, functionality: fully functional, clamping force: 450 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 80 g, mold height (min.): 180 mm, opening stroke: 350 mm, plate width: 550 mm, plate height: 330 mm, installation height: 350 mm, The Engel ES200/45 HL Victory machine can be inspected at any time; the machine is connected to power and fully operational. Tie-bar-less design. Dkedpfxjx Ex Nbs Afnsh

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 7,500 kN, Equipment: documentation/manual, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN Dodpfx Aex Iu U Eefnjkh • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Clamping force: 125 t Type: Horizontal Drive: Hydraulic Clamping unit Clamping force: 1250 kN Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 150 mm Max. plate distance: 850 mm Minimum mold height: 250 mm Mold plates (HxV): 740 x 840 mm Max. mold size (HxV): 740 x 700 mm Bar clearance: 470 mm Injection unit (45 mm screw) Screw diameter: 45 mm Dkjdpevytz Njfx Afneh L/D ratio: 20 Metering volume: 290 cm³ Screw speed: 290 min⁻¹ Plasticizing capacity: 35 g/s Injection flow rate: 180 cm³/s Injection volume: 251 cm³ Injection speed (specific): 134 cm³/s Injection pressure: 1520 bar Injection pressure (increased): 2040 bar Specific injection pressure: 1230 bar Nozzle stroke: 350 mm Nozzle force: 67 kN Heating capacity: 13.3 kW Number of heating zones: 5 Drive Pump drive power: 22 kW Oil volume - main tank: 310 l Oil volume - additional tank: 110 l

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Type: Vertical Djdpfx Afjvy Anxonekh Drive: Hydraulic Machine for Rubber.

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Dkjdpfsvb Hbfsx Afnjh

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. Dkodpoickd Hsfx Afnoh First and only owner since produced. The price is loaded on truck.

Year of construction: 2016, condition: ready for operation (used), overall weight: 9,500 kg, General Data Machine weight 9500 kg This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Dksdex D Hp Ropfx Afnoh Injection Moulding

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot Djdpfx Afsx Szwhjnekh

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Dodpfx Afonxkxwjnjkh Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Condition: good (used), Year of construction: 2007, operating hours: 47,792 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm centering diameter of fixed platen: 125 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts Dodpfeygv S Iex Afnekh interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included: screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG Djdsygv Szjpfx Afnekh

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x Dsdpfoygv Sbsx Afnskh measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, clamping force: 7,000 kN, screw diameter: 40 mm, total height: 2,500 mm, overall weight: 20,000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. • 2 x 3-zone screws d50 / 32 hot runner control circuits • Max mold weight (total): 11000 kg / max mold weight per plate: 7300 kg / max distance of the molds center of gravity from clamping surfaces: 315 mm • Opening force (with pressure pad) kN 510 • Opening force: 130 kN • Platen size (H × V): 1510 × 1440 mm • Distance between tie bars (H × V): 1100 × 960 mm • Tie bar diameter: 175 mm Dedex D E Dtopfx Afnskh • Max. mold weight: 11000 kg • Injection Unit 1 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating wattage: 16 kW • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection Unit 2 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2400 bar • Nozzle stroke: 600 mm • Heating capacity: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine Depth 8500 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2012 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Max. Hubvolumen: 113 ccm³ Spritzteilgewicht 102 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil Dkedpfxox Ddd Ss Afnoh -Schutzzaun -Förderband

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2011 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 151 ccm³ Spritzteilgewicht 136 g/PS Steuerung: CC200 Ausstattung. -1 x Kernzug -Ausblasventil -Schutzzaun Dkjdpfx Afsx Ddgmjnoh -Förderband

Condition: excellent (used), Year of construction: 2011, Engel VIPER 40 stand alone linear robot (2011) Number of axis: 3 Euromap 67 on the robot Dodpfoxc E S Ijx Afnskh X= 900mm Y=1900 mm Z=3320mm Data must be chcecked with our technical team