Used Engel for sale (242)

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 Ljdpfxez Eimfj Akqshn • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Lhedpoyuayrofx Akqjn

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Lodsyw Aa Uspfx Akqjhn Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 0x0 mm Ljdpfx Akoz Ipp Esqehn Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core puller x 1 Hardened injection unit - bimetal Machine was serviced by the authorized Engel service Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating output: 9.2 kW Total output: 27.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 220 cm³, plate length: 760 mm, plate height: 760 mm, total length: 67,500 mm, total width: 2,000 mm, total height: 2,420 mm, overall weight: 8,500 kg, Equipment: documentation/manual, ENGEL e-motion 440-160 Stock No.: 503676 Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Ljdpfxoz A S I Te Akqshn Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum installation height: 375 mm Maximum installation height: 600 mm Maximum platen spacing: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Displacement: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 min Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500KG Equipment Screen text in German Screen text in English CEE socket 32A Hydraulic core pull, 2x Hydraulic core pull unit Air valve 1x Machine with water manifold Machine without material hopper Machine without suction conveying system Pneumatically operated needle shut-off nozzle Leveling elements EUROMAP 63 interface EUROMAP 67 Handling interface Interface for ejector plate locking Schuko socket 10A

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Lhjdpezxrd Asfx Akqen

Condition: good (used), Year of construction: 2011, operating hours: 78,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, injection pressure: 1,615 bar, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 12,200 kg, warehouse no.: 503731 manufacturer: ENGEL type: Victory 1050-220 spex controller: CC 200 A02 year of construction: 2011 operation hours: 78000 h clamping force: 2200 kN size of mould plates h x v: 880 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm injection volume: 510 ccm Spritzdruck: 1615 bar Lhedpez D U Iljfx Akqon equipment included: screen text german core pulling hydraulically 2x machine incl. Handling Anti vibration mounts mould heating 8x technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 measures of machine l x w x h: 5.7m x 1.7m x 2.2m total weight: 12200KG

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Ljdpfx Akoz Ipt Deqjhn Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, ENGEL Victory 260 Combi – 2006 Manufacturer: ENGEL Model: VC650H/330W260 COMBI Year: 2006 Serial No.: 162803 Clamping Force: 260 tons (2,600 kN) Controller: CC200 Opening Stroke: 908 mm Ejector Stroke: 200 mm Locating Ring: 160 / 125 mm Injection Unit 1: Screw Diameter: 40 mm Shot Volume: 251 cm³ Injection Rate: 106 cm³/s Max. Hydraulic Pressure: 180 bar Max. Injection Pressure: 1,929 bar Screw Stroke: 198 mm Injection Unit 2: Screw Diameter: 30 mm Shot Volume: 113 cm³ Injection Rate: 111 cm³/s Lhjdpfszu Smijx Akqen Max. Hydraulic Pressure: 160 bar Max. Injection Pressure: 1,278 bar Screw Stroke: 158 mm Core Pullers: 2 (moving platen) Sequential Valve Gates: 4 Hot Runner Zones: 24 Rotary table Machine is including robot and conveyor belt Robot: Engel ERC 23/1-F machine is in excellent condition

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Vertical injection molding machine with rotary table – complete maintenance history (documented annually) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control: CC 200 Language: German, English Fully functional Condition: very well maintained Machine comes from a German first owner xxxxx without the depicted peripheral devicesxxxxx Lhjdey Ir Nyopfx Akqon Extras * Light grid / light curtain * Freely programmable inputs and outputs * 9 freely programmable inputs can be programmed depending on the station * 9 freely programmable outputs * Handling interface Euromap 67 * Charge amplifier for internal pressure-dependent pressure switching, including the corresponding graphics pages * 3 potential-free monitoring inputs for monitoring peripheral devices such as temperature controllers * Euromap 63 interface for connection to a machine data acquisition system * Hot runner control / shut-off nozzle control * Complete maintenance log * Language: German - English Injection unit Screw diameter: 30 mm Injection weight: 89 g/PS Injection pressure: 1451 bar / increased 2205 Injection volume: 99 ccm Clamping unit Clamping force: 70 tons / 700 kN Diameter of rotary table: 1200 mm Opening stroke: 305 mm Ejection stroke / force: 105 mm / 20.1 kN Clamping unit: fully electric - Available immediately and can be loaded free of charge onto the buyer's truck at our warehouse in Hanover/Germany or free delivery to your location against reimbursement of freight costs – worldwide delivery possible - The machine was tested before disassembly - The machine is our sole property - The requested machine is available immediately in our warehouse in Hanover and is offered in working condition and can be inspected under power. For information about the machines we offer and our company: - We only sell machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before disassembly. - We do NOT sell insolvency goods - we are NOT an intermediary that deals with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits Lhedpfx Akjy Ug Ahjqen RC 200 integrated with C30 E handheld control unit

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm Lsdpoz Dgpbsfx Akqohn • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • Including GEKU robot

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Lhedpjzvdbusfx Akqon Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Injection unit 1: Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Injection unit 2: 30 mm Drive / Power Pump motor power (kW): 16.91 Ledpfx Aksyyz Ddsqjhn Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Ljdpfozrngyox Akqshn Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Ledszxqycjpfx Akqjhn Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Equipment: documentation/manual, Top machine from cleanroom manufacturing (pharmaceutical industry) The machine can be inspected while powered on, by arrangement. Technical data Manufacturer: Engel Type: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33107 h Control: CC 200 Extras - with rotary table, 820 mm diameter - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - protective enclosure/safety cage - horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional Lsdpoub Umqsfx Akqehn Dimensions L/W/H: see drawing Weight: 10600 kg Functionality: fully operational Condition: excellent Clamping unit Clamping unit: hydraulic Clamping force: 1300 kN / 130 tons Tie bar distance: tie-bar-less Opening stroke: 606 mm Tool installation height: 250 mm Centering: 125 mm Platen distance max: 850 mm Platen size: 750 mm / 850 mm (W x H) Injection unit 2K Screw diameter: 25 / 22 mm Injection weight: 72/ 35 gr. Injection pressure: 2391/ 2066 bar Injection volume: 79 / 38 ccm Ejection stroke / force: 61 kN / 100 mm GEKU robot details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-swivel axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of shipping costs / worldwide delivery possible from our warehouse in Hanover / Germany Financing - upon request - lease-purchase option Price: upon request

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm Ledpfjzvc N Rex Akqehn L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Lhodpswm Iy Eefx Akqsn Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, plate length: 680 mm, plate height: 740 mm, total length: 4,500 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Ledpfxsz A D Dts Akqshn Year of manufacture: 2007 Operating hours: 68651 h Technical data, clamping unit Clamping force: 1200 kN Platen size h x v: 740 x 680 mm Minimum mold thickness: 300 mm Maximum mold thickness: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of moving platen D: 125 mm Centering of fixed platen D: 125 mm Tool weight: 825 kg Technical data, injection unit Screw diameter: 35 mm Displacement: 154 ccm Injection pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow rate: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions L x W x H: 4.5m x 2.1m x 2.1m Total weight: 7300 KG Equipment Screen text in German CEE socket 16A Hydraulic core pull 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Leveling elements Interface for ejector plate locking Schuko socket 10A Technical data, handling Machine type: Linear Manufacturer: ENGEL Control: ER-HLI41VC

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Lodsyyzzvopfx Akqohn Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: excellent (used), Year of construction: 2003, Engel ES 1800/300 HL-V Clamping force 300 tons Year of manufacture 2003 Screw 70 mm Max shot volume 1039 cm³ Lodeww Nu Eepfx Akqehn Core pull x3 Including robot

Condition: excellent (used), Year of construction: 1999, Engel robot Ledpfxexxdhte Akqohn Year of manufacture: 1999 With Plus control cabinet

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Y axis traverse stroke - 1500 mm Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Nominal payload - 25 kg Ledpsxy Rarsfx Akqohn IMM clamping force - 55-340 US tons

Condition: excellent (used), Year of construction: 2001, Engel handling equipment ER-USP 5, year of manufacture 2001 Lhjdjxt S Taopfx Akqsn