Used Engel for sale (262)

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Y axis traverse stroke - 1500 mm Cjdpfx Aexy Rarolbegu Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Nominal payload - 25 kg IMM clamping force - 55-340 US tons

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW Cgodpfx Aljx Nr Uxjbeu • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified Cgjdsyf Htyspfx Albeu • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW Csdpfjyn Ntzox Albjgu • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit Cedpfx Aljyf H Nnsbogu • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. Csdpfx Aeyfrb Nslbegu • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, screw diameter: 45 mm, controller manufacturer: ENGEL, controller model: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Additional equipment • Tool heating: 32 control circuits, max. heating output 60 kW • Vacuum compressed air circuits: With Venturi nozzle and pressure switch • Solenoid air valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: Self-learning system for mold protection • Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% Machine Benefits Qualitative Machine Benefits • High precision and sensitive mold protection • Advanced control system with a 21. 5" full hd touch screen and user authorization system Technical Machine Benefits • Platen stroke: 1800 mm Cgsdpfsx Nr Tnsx Albsu • Max. Platen distance: 2650 mm • Mold installation height: min. 850 mm, max. 1740 mm • High operational reliability with stable platen guidance and precise platen parallelism • Energy-efficient with reduced energy consumption and intelligent servo-hydraulics (engel ecodrive) • Multi-circuit hydraulics enabling parallel movements (ejector, core pull, nozzle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, clamping force: 400 kN, screw diameter: 18 mm, overall weight: 5,850 kg, controller manufacturer: ENGEL, controller model: n/a, This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Ejector travel: 105 mm • Nozzle travel: 380 mm • Turntable diameter: 1200 mm • Rotary table drive: hydraulic • Ejector drive: hydraulic • Connected load: 22 kw • Maximum opening 520mm /minimum opening 185mm Cgodpsx D Nm Eofx Albeu Extra Information Machine still under power

Condition: good (used), Year of construction: 2006, operating hours: 107,027 h, functionality: fully functional, Clamping force 200 kN Screw diameter D55 mm Csdpfjyvt Ugex Albsgu Max. injection volume 511cm³ Mounting plates 860 x 860 mm Total weight 12.9 t

Condition: excellent (used), Year of construction: 2014, Engel for silicone Insert 500V/shuttle Clamping force 100 tons Cgjdpey Aib Njfx Albsu Year of manufacture 2014

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Free shot weight (PS): 224 g/s Number of heating zones: 4 Codjyk T I Uopfx Albogu Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: used, Year of construction: 2008, operating hours: 50,500 h, clamping force: 700 kN, Used injection moulding machine Manufacturer: Engel Model: VC200/70 Tech Year of manufacture: 2008 18 mm screw 50,500 operating hours Clean room Full technical details: see last image Location: Germany - Erzgebirge ____ Cgodpfxoyxd R Ro Albou Our General Terms and Conditions (GTC) apply. The seller accepts no liability for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Csdpoyrdzuofx Albogu

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 375 kg, load capacity: 3 kg, For sale is a stand-alone handling machine of the Engel brand and type ERC 13/12-F The handling unit is ready for immediate use and fully functional after assembly Technical data Year of construction: 2010 Max. handling weight: 3.5 kg X-stroke: 400 mm Y-stroke: 1,000 mm Z-stroke: 2,240 mm Y-axis: Single stroke B-axis drive: Pneumatic B-axis torque: 5 Nm Servo axes: 3 Pneumatic axes: 2 Compressed air circuits: 2 Valve positions: 6 required DI(UEK): 8 Stand height: 375 mm Connection data: 3*400 V /50HZ/16 A Rated current: 10,000 A Shelf height 900-1200 mm (depending on installation height) On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Cgjdpfjvgc Skjx Albeu Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Cgsdpoxvmmyefx Albju Clamping force 650 t Clamping force up to 725 t Year 1996 Tie bar distance 102.5 x 92.5 cm Screw diameter 90 mm Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: excellent (used), Year of construction: 1999, Engel ES 4450/600HL Clamping force 600 t Codpfx Aexxcyuolbjgu Year of manufacture 1999 Screw diameter 90 mm PVC cylinder with additional screw For PP, PE, etc. Injection volume 2480 cm³ Clamping plate size (horiz./vert.): 1480x1300 mm Minimum mold installation height 500 mm

Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Tie bar spacing: 84x84 cm Screw diameter: 80 mm Injection weight: 1402 g Minimum-maximum mould height: 250 mm – 850 mm Cedjyl S Ehspfx Albsgu Machine weight: 25,500 kg

Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Distance between tie bars: 84x84 cm Screw diameter: 70 mm Shot weight: 1230 g Mould height (min-max): 250 mm – 850 mm Cedpfxsyl S Ens Albogu Machine weight: 25,500 kg

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 Cedpfxevdqbhe Albsgu 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Cgedpfxex Nr R Ho Albeu Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Machine weight 20000 kg Measurements height 2230 mm Codpox Nr H Isfx Albegu Dimensions Machine Length 8840 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Cgedpfx Ajx Nr Rtslbsu Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2012, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2012 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Max. Hubvolumen: 113 ccm³ Spritzteilgewicht 102 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug Cgsdpfxsx Ddd Ss Albsu -Ausblasventil -Schutzzaun -Förderband

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2011 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 151 ccm³ Cgedpox Ddgmsfx Albju Spritzteilgewicht 136 g/PS Steuerung: CC200 Ausstattung. -1 x Kernzug -Ausblasventil -Schutzzaun -Förderband

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control System: CC200 Year of manufacture: 2011 Operating hours: 61,606 h 1. Clamping Unit Clamping force: 6,500 kN Tie bar clearance (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Max. daylight between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Csdpfx Alsywrtwsbsgu Injection pressure (standard): 1,910 bar L/D ratio: 20 Screw stroke: 430 mm Max. screw speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: - 4 pcs. (installed on the fixed platen) 5. General Specification Two-platen machine (DUO series) designed for the production of large plastic parts. The design ensures high rigidity of the clamping system and allows operation with heavy moulds while maintaining a large opening stroke. The CC200 control unit enables precise process parameter control and integration with automation systems and peripherals. If you wish, I can also prepare: - a sales offer version (more marketing-oriented), - translation into German or English, - or a market value assessment of this machine.