Used Fanuc Robots for sale (620)

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00508, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2015.07. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2015.07 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iB B-Size Hsdpfxsxr Eube Ad Dofp Year of Manufacture Cabinet: 2015.06 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2006, Make: FANUC, Model: M-710-IC70, Year: 2006, Serial No.: R06926863, Control: Siemens, Operating panel, Control cabinet, System type: R-J3iC, Year: 2006, Serial No.: E06804051, Safety enclosure 5,000 x 4,000 mm, aluminium frame construction, plexiglass housing. Hedoxuhxzopfx Ad Djfp

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, type of input current: three-phase, table load: 300 kg, overall weight: 2,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have 2x Fanuc Robodrill a-D21MiB5 plus units that we no longer use. They are too lightweight for our intended applications. We prefer to make someone else happy with the machines. Some specs below: • Year of manufacture: 2022-03 and 2022-06 Hsdpfx Ajxwigljd Dofp • Large chip tray (non-standard) • High-pressure pump for through-spindle coolant (non-standard) • Extraction unit • Low operating hours • Always serviced by Humacs Krabbendam • Dataserver in both machines (FTP accessible) (non-standard) • All toolholders as shown in the photo • Fanuc program transfer tool (software) • Manuals Note: We have moved the Renishaw probes to our other machines. The listed price is per unit.

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: ARC Mate 120iC R-30iA, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a comprehensive 77-Point Protocol assessment conducted by our in-house robotics engineers. Hjdpfx Asxrdu Hsd Dofp Brand: FANUC Model: ARC Mate 120iC Controller: R-30iA Application: ARC welding robot Payload Capacity: 20 kg Reach: 1811 mm Robot Weight: 250 kg The FANUC ARC Mate 120iC R-30iA is a robust and intelligent arc welding robot engineered for high precision and efficiency. Featuring integrated torch cable management, advanced servo technology, and exceptional arm rigidity, this robot is built to minimize cycle times and guarantee smooth, stable operation. It is highly flexible, allowing for floor, ceiling, or angle installation, and can handle payloads of up to 20 kg at the wrist—making it perfectly suited for demanding welding applications. Optional features such as iRVision and coordinated motion further enhance accuracy and productivity. Ideal for industries seeking reliable and fast welding automation solutions. Delivery Time: To be agreed upon IRS Robotics® Refurbished: - 77-Point Protocol: Fully tested on our dedicated test benches - New oil/grease - New batteries - Complete cleaning - Painted in your preferred RAL color - Includes precision status measurements (repeatability, accuracy, backlash) About Us: We are trusted daily by customers for the delivery of refurbished A-Brand industrial robots: ABB, KUKA, FANUC, YASKAWA. Established 2002. Worldwide shipping.

Condition: good (used), Year of construction: 2007, Fanuc Robodrill T 21 iF, year of manufacture 2007, control system Fanuc 31 i A5, travel X/Y/Z 500/400/300 mm, Hsdpfjxwt Rzsx Ad Defp spindle speed up to 24,000 rpm, 16-position tool changer, accessories, 12,500 spindle hours, spindle replaced in 2016,

Condition: used, functionality: fully functional, For sale are several spindle motors and servo motors from the manufacturers Mitsubishi, Siemens, and Mazak. The technical condition of the motors has been checked, and they are ready for immediate use. MITSUBISHI: Hfedjxwi Ucepfx Ad Dsp • Mitsubishi Spindle Motor SJ-4-VKS15-13ZM (2004) • Mitsubishi Spindle Motor SJ-4-KS15-U62M (2000) • Mitsubishi Servo Motor HC-H153S-A47 (2004) • Mitsubishi Servo Motor HC-SF52K-S1 (2x available) • Mitsubishi Servo Motor HC-SF52BK-S2 • Mitsubishi Servo Motor HC-H203BS (2004) • Mitsubishi Servo Motor HC153S-SZ (2x available) SIEMENS: • 3 Permanent Magnet Motors 1FT5064-0AF71-2-Z(F) (2x available) • 3 Permanent Magnet Motors 1FT5074-0AK71-2(F) The spindle motors are sold on an exchange basis. This means you receive a refurbished, tested spindle motor from us, while we receive your defective unit in return. As a result, your production can continue without major downtime and unplanned outages are minimized. Alternatively, you can commission a repair only. We take care of the entire process: we disassemble the spindle motor, repair or refurbish it in our workshop, and reinstall it afterwards. So you have a single point of contact for the entire process – from disassembly to commissioning, everything from one source! INFORMATION: We have a wide range of drive and servo motors for CNC machines and other machinery in stock, and we also offer repair services for them. Please send us your inquiry – we will promptly check availability for your machine. If you have any further questions, please feel free to contact us at any time. Our service promise: For us, quality, expertise, and customer satisfaction come first. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability assumed.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00515, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/70 manufactured in 2008.08. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2008.08 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Hfodpfxexrk I Hs Ad Dop Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.07 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: excellent (used), A06B-6105-H002 6-AXES SERVO Hsdpfxexq Tu To Ad Djfp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 2015, current capacity . kVA number of controlled axis . workpiece weight . kg 50 zehn verschiedene Vers Hedpoudc Tksfx Ad Djfp

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Hfsdpfx Adexqtaie Dsp Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Hfedpsxwn Izofx Ad Dop

Condition: good (used), Year of construction: 2007, Control unit R-J3iB Number of axes: 6 Max. Load capacity: 3 kg Hjdpfx Adsxr A Eqe Defp Reach: approx. 700 mm Scope of delivery : Robot,control unit,cable,touch panel,operating instructions

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00459, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2016.07. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2016.07 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2016.06 RCC Length (m): 7   Hfsdpjxrdypefx Ad Dop Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: new, Year of construction: 2012, operating hours: 10 h, Fanuc R2000iB/165F DEVELOPMENT OF GSG ROBOTICS Hsdpfxoxq Tr Ee Ad Dsfp GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 1999, number of controlled axis . workpiece weight 150 kg throat . mm total power requirement . kW dimensions of the machine ca. . m Hsdpfxsuu Tbnj Ad Dsfp

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model i Pendant A05B-2255-C101#EGN This 6-axis FANUC Robot M20iA 35M was manufactured in 2017. It features a maximum payload capacity of 35KG and a reach of 1813 mm, ideal for tasks requiring precision and strength. Consider the opportunity to buy this FANUC Robot M20iA 35M robot arm. Contact us for more information. Hjdpfx Aexqtbasd Djfp Application Types Robotics

Condition: good (used), Year of construction: 2007, load capacity: 6 kg, arm reach: 1,410 mm, ROBOT MAKE: FANUC MODEL: ARCMATE 100 iB TECHNICAL SPECIFICATION MAX. REACH: 1410 MM Hfodpfx Adoxwli Aj Dsp YEAR OF MANUFACTURE: 2007 CONTROL UNIT: R30iA AXES: 6

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals Hodpoxtwxhsfx Ad Dsfp The machine has been used little and the condition is like new. Ready to buy.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00498, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2015.07. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2015.07 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Hfedpfx Aexrdyied Dep Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F Hodpfxsxq Tu Hs Ad Defp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: like new (used), Year of construction: 2025, spindle speed (min.): 12,000 rpm, Machine type: CNC Vertical Machining Center Model: Robodrill L with Automation Manufacturer: Fanuc / TS Control: Fanuc Year of manufacture: 2025 Location: Germany for our customers in Baden-Württemberg (BW) TECHNICAL DATA FANUC ROBODRILL Travel X-Y-Z: 700 x 400 x 330 mm Main spindle speed: max. 24,000 rpm Tool holder: BT30 with Big Plus Drive power: 26 kW (1 minute) Tool change time: 1.6 sec. (chip to chip) Connected load: 20 kVA Weight: approx. 2,500 kg TECHNICAL DATA FLEX-ROC CELL Robot: Fanuc M10 ID/L 2 gripper change positions Max. part weight: 8 kg Max. workpiece size: 230 x 150 x 150 mm (adjustments for other sizes possible) Hfjdpfx Aexqqt Hod Djp Parts conveyor: 1700 x 580 mm Max. number of tools: 64 Connected load: 4.5 kVA Weight: 1,700 kg (Subject to errors in technical data and specifications)

Condition: new, Fanuc A02B-0259-C241 # A HANDY MAC OPE PANE SN:P002780 ,unused, 100% functional, scope of delivery according to photos Hfjdpsi D Uvmefx Ad Djp

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00492, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Hedsxpyg Hepfx Ad Defp Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: new, Fanuc A06B-6124-H102 Servo Amplifier Module SN:V02260242, unused in opened original packaging, 100% functional, scope of delivery as per photos Hjdpfxei D Uzce Ad Dsfp

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00486, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Hjdpfsxpygtex Ad Defp Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10