Used Fanuc Machines Lathes for sale (858)

Condition: ready for operation (used), Fanuc manipulatierobot die een last van 700 kg kan hanteren Heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter. met R-30iB Plus controller Godpeytyqhofx Aggjip control: R-30iB A05B - 2614 - B090

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00570, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.09. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.09 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Gijdeytfuropfx Aggep Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.09 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00548, load capacity: 400 kg, arm reach: 3,704 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/400L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/400L Model Number: A05B-1332-B203 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Gjdsyr Nikopfx Aggeip Payload (kg): 400 Reach (mm): 3704 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 3150   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Giedpfxjyugyrj Aggjp

Condition: like new (used), Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Godpfjyt Db Dex Aggsip Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Movement Godjx D Nq Repfx Aggoip X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model i Pendant A05B-2255-C101#EGN Gjdsx D Nr Uopfx Aggjip This 6-axis FANUC Robot M20iA 35M was manufactured in 2017. It features a maximum payload capacity of 35KG and a reach of 1813 mm, ideal for tasks requiring precision and strength. Consider the opportunity to buy this FANUC Robot M20iA 35M robot arm. Contact us for more information. Application Types Robotics

Condition: excellent (used), A06B-6105-H002 6-AXES SERVO DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Gsdpfxsxq Tu To Aggjip

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F,20% discount at order more then 1 robot. Giedpoxq Tu Hjfx Aggsp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: ready for operation (used), De vorige eigenaar was een Belgisch bedrijf dat aluminium mallen produceerde voor Bridgestone-autobanden. De apparatuur bestaat uit 3 Breton-machines en een Fanuc-robot voor het lossen van de werkstukken. Breton Ultrix 800 (nr. 1) Breton Ultrix 800 (nr. 2) Breton Xceeder 900 Fanuc M-900iB handlingrobot Godpfx Agoxtgkgegjip Max longitudinal travel X-axe: 18 000 mm

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm Giodpsv Sfk Hofx Aggjp 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 Gsdpfx Aeypma Isggeip • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed

Condition: ready for operation (used), Year of construction: 2020, overall weight: 250 kg, number of axes: 6, This 6s FANUC M20IA robot arm was manufactured in 2020. It features a maximum payload of 20 kg and a reach of 1,811 mm, making it suitable for various applications. With its versatile mounting options and robust protection ratings, consider the opportunity to buy this FANUC M20IA robot arm. Contact us for further details. • Maximum payload: 20 kg • Maximum reach: 1,811 mm • Repeatability: ±0.02 mm Gedoympuiopfx Aggjip • Axis ranges: • J1: ±170° • J2: +160° / -90° • J3: +225° / -45° • J4: ±200° • J5: ±140° • J6: ±450° • Axis speeds: • J1: 180°/s • J2: 180°/s • J3: 180°/s • J4: 430°/s • J5: 430°/s • J6: 720°/s • Mounting position: floor, inverted, or angle • Protection rating: • Body: IP54 • Wrist: IP67 • Controller model: R-30iB (or R-30iB Plus) • Programming language: FANUC TP & KAREL • Power supply: 200–230 V AC, 3-phase, 50/60 Hz

Year of construction: 2015, operating hours: 49,071 h, condition: ready for operation (used), overall weight: 4,400 kg, Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details. Gedpfeyninfsx Aggoip • Clamping Force: 100t • Screw Diameter: 26mm • Power Supply: 200 V∼50/60 Hz, 220 V∼60 Hz

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,284 h, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D14MiB5 was manufactured in 2020. It features a spindle speed of 10,000 rpm and a 100 mm column extension. The machine includes a rotary table DDR260iB and a Renishaw OMP40 3D spindle probe for enhanced precision. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D14MiB5 vertical machining centre we have for sale. Contact us for further details. • Big Plus spindle interface • 100 mm column extension • Machine roof • Electrical requirements: 3-phase, 10 kVA, 200–220 V AC, 50/60 Hz, SCCR 2.5 kA Additional equipment Godpfxsylw Hde Aggsip • Rotary table FANUC DDR260iB with face plate • Special setup: DDR 4th axis horizontal • Lang Quick-Point round plate 96 adapted for FANUC DDR/DTT • Renishaw OMP40 3D spindle probe with OMI-2T receiver • Häberle coolant tank HK250 (250 l capacity) • External coolant pump 220 l/min with flow monitoring • Manual band filter • Chip tray with perforated plate • Commissioning of Häberle machine and coolant system included

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 3,000 kg, controller manufacturer: FANUC, controller model: RoboCut α-C600iA, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. • Axis travels: X/Y 600 × 400 mm; Z 310 mm (optional 410 mm); U/V ±100 × ±100 mm • Max workpiece size: 1050 × 800 × 310 mm (standard) • Max workpiece weight: 1000 kg • Max taper angle: ±30° at 150 mm (optional ±45° at 70 mm) • Positioning/minimum step size: 0.0001 mm Gjdpfx Agox D Duqjgoip • Achievable surface roughness: up to Ra 0.3 µm • Automatic wire threading (AWF): approx. 10 s under water; rethreading inside submerged cuts • AI Corner Control: optimizes cutting speed and flushing in sharp corners • ECO Mode: energy and wire consumption reduction functions • Applications/materials: steel, aluminum, titanium, nickel alloys; mold & die, aerospace, medical, precision parts

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools Gijdpfx Ajx D N Nteggop • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank.

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: FANUC, controller model: R-30iB, This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information. Machine Benefits Gsdpfx Agsyaih Njgjip Technical Machine Benefits • Load capacity: 165 kg • Reach: 2655 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,439 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, controller manufacturer: FANUC, controller model: 31i-WB, product length (max.): 2,900 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. • Work area / travels: • U-axis: 200 mm • V-axis: 200 mm • Rapid traverse rates: • X-axis: 2000 mm/min Gisdex Nr N Aspfx Aggep • Y-axis: 2000 mm/min • Z-axis: 900 mm/min • U-axis: 450 mm/min • V-axis: 450 mm/min • Workpiece capacity: • Maximum workpiece dimensions: 1250 × 975 × 300 mm • Maximum workpiece weight: 3000 kg • Wire EDM parameters: • Maximum wire weight: 16 kg • Maximum taper angle: ±30° / 150 mm • Minimum positioning increment: 0.0001 mm • Machine data: • Permissible workpiece mass: 3000 kg • Electrical data: • Power supply: 3-phase, 50/60 Hz • Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2018, operating hours: 116 h, overall weight: 180 kg, number of axes: 6, This 6-axis FANUC M-10iA / 8L robot arm was manufactured in 2018. It features a maximum reach of 2032 mm, a sound power level of 57.4 dB, and operates within an ambient temperature range of 0-45°C. The robot includes an R-30iB Plus controller and supports a maximum wrist load of 8 kg. Consider the opportunity to buy this FANUC M-10iA / 8L robot arm. Contact us for more information about this machine. Gedex D Ec Nepfx Aggeip • Availability: 2 units • Condition: barely used • Controller: R-30iB Plus • Electrical supply: 380–575 V, 50/60 Hz, 3-phase • Average power: 1 kW • Integrated signals on upper arm (stop signals): 8 In / 8 Out • Integrated air supply: 1 • Sound power level: 57.4 dB • Ambient temperature: 0–45 °C • Protection rating (mechanics): IP54 (standard/optional) • Protection rating (wrist & A3 arm): IP67 (standard/optional) • Robot footprint: 343 x 343 • Max. weight on wrist (payload): 8 kg • Max. reach: 2032 mm • Repeatability: 0.03 mm

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 1997. It features an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. • Rapid feeds (X/Y/Z): up to 48 m/min • Installed power: 10 kVA • Supply: 200–220 V, 50/60 Hz, 3-phase • Registered cutting time: 15,291 h Giedpfoyrq Uhsx Aggsp Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, overall weight: 2,100 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 380 mm, and Z-axis travel of 300 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. • Rapid feeds (X/Y/Z): up to 48 m/min • Installed electrical power: 10 kVA • Supply voltage: 200–220 V, 50/60 Hz, three-phase • Registered cutting time: 8,235 h Gijdjyrrlnspfx Aggop Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: FANUC, controller model: Series-31i, spindle speed (max.): 10,000 rpm, This 5-axis FANUC ROBODRILL α-D21LiB5 was manufactured in 2018. Ideal for precision machining, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this FANUC ROBODRILL α-D21LiB5 vertical machining centre. Contact us for more information. Additional equipment Gijdpfx Aoyaqfijggsp • Oil Mist Extractor Machine Benefits Technical Machine Benefits • High torque spindle drive • Versatile tool measurement and probing systems • Advanced control features for smooth operation and precise contour control • Comprehensive cooling and chip management systems • Spindle drive: bbt/bt 30, high torque • Two-axis rotary table: tsudakoma twa-160 with drives • Wireless tool measurement probe: metrol rc-k3e • Part probing system: metrol td1 • Tool magazine: 21 positions, bbt/bt 30 Extra Information Media Through-Spindle Coolant System: 25 bar Work Area Flushing System Coolant Tank Capacity: 250 liters Chip Tank Interface for Washdown Gun Connection Options included are rotary/tilting table, chip conveyor, high-pressure coolant pump, part probe, and oil mist extractor.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,581 h, screw diameter: 20 mm, controller manufacturer: FANUC, This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information. • Optional: Wittmann Handling Gijdpfx Agex D R Ahjgsp

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, controller manufacturer: FANUC, controller model: Series 16i-MB, number of axes: 4, This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Machine in good condition, regularly maintained. Technical Machine Benefits • 4th axis: yukiwa • Table size: 750 x 380 mm • Spindle power 11 kW (1min rating) / 3.7 kW (continous) Extra Information Machine still under power Gsdjx D Rxiepfx Aggeip