Used Finger Jointing for sale (2,009)

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Dodjx Eudnspfx Afnskh

Condition: new, Schunk PGN100-Plus stroke 2, 2-finger parallel gripper 371 152 HA 050420, unused in original packaging, 100% functional, scope of delivery as per photos. Dkjdpfx Afex Euc Rensh

Condition: used, Year of construction: 1982, Used machine Condition: good Dkjdjw I Ulpjpfx Afnoh Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Working length: 3000 mm Dkedpfowi Adkjx Afnoh Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim

Condition: used, Used machine Condition: Fully functional Technical data: Working length: 3000 mm Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim Dsdpfxew I U Evo Afnskh

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Dkedpfx Afex Rhwljnsh Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm

Year of construction: 1986, condition: used, - working length (mm): 3200 Dkjdpfxe Drmxe Afnjh - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction

Condition: used, Year of construction: 1981, Barnaul 1000t press in perfect working condition. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Djdjx Da Aqspfx Afnekh Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: used, Capacity : 2000 tons, Dedpfexy Rvtsx Afnokh Stroke : 140 mm, Shut height : 510 mm, Ram adjustment : 25 mm,

Condition: like new (used), Code: 0609 Brand: OMAS Model: 120/3 Milling cutter for joints Dodpfx Afjd I H Rcenokh Diameter 120 mm Height 30 mm Hole 40 mm

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden Djdpfjd St R Sex Afnekh - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size Dkedpfexl Dnasx Afneh The machine is additionally equipped with a transverse feed/magazine for components.

Condition: used, 25/11/2025 Knuckle-joint press A.COLOMBO 1600 ton. Manufacturer Agostino Colombo Dkodpfoxbtbzjx Afneh Model G 1600 Nominal capacity 1600 ton Table size 1060 x 900 mm Stroke 135 mm Shut height 635 mm Ram adjustment 20 mm Side opening 400 mm Motor 45 HP

Condition: ready for operation (used), Technical characteristics Gooseneck : 650 mm Veneer thickness : 0.4 to 2 mm Feed speed 9 m/min Total electrical power 0.18 kW (0.2 HP) Power and Motors Voltage: 220 V Pluging: Singlephased Power: 0,18 Kw Overall dimensions Dkedpfx Afjtx Hx Aoneh

Condition: ready for operation (used), Technical characteristics Feeding belt 600 x 1500 1 finger jointing unit with rotating table on mobile carriage with reference Milling and double gluing roller Package 600 mm Max height 180 mm Lengths of wood 200 to 1000 mm Automatic transfer and overturning of finger-jointed pieces Pre-forking station Hydraulic roller press Cutting Max length of wood 4500 mm Right side discharge on table Power and Motors Dkedpfxottdnao Afnjh Pluging: Three-phased Overall dimensions

Condition: used, Crimping pliers for crimping tubular cable lugs and connectors with exchangeable blades for the processing range 10 - 120 mm². Dkedecabzrepfx Afnoh available blade inserts: 10, 35 and 70 mm² Total length: 660 mm Weight: 4,1 kg

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke Dkedpfexrb Tgex Afneh - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Dodpfjw I Uhdsx Afnokh

Condition: new, Year of construction: 2025, Corner Jointing Machine EV175 Dsdpfx Asxta Rmefnjkh Stable and precise corner joints The EV175 combines cost-effectiveness with high corner stability. The ideal machine for all standard profiles and corner brackets.

Condition: used, Year of construction: 2019, Product crushing and screening kit Manufacturer : ARKAMA Year of production: 2019 Power: 9 kW (two motors 1.5 kW each + two motors 3 kW each) Includes control cabinet with weighing meter. Technical condition: used machine Dkjdpfx Afsvbrczenoh

Condition: new, We manufacture expansion joints from high-grade steel sheet, thickness 3 mm. Djdpfxswt Ihcs Afnjkh Preferred sections of two metres. Minimum order quantity: 20 linear metres. The profile is designed to ensure strong anchoring in concrete. At the same time, it can serve as a formwork between successive concrete pours. We produce to order and adapt to the floor thickness. Surfaces not in contact with concrete are coated with waterproof paint. OPTION FOR STAINLESS STEEL PRODUCTION We can also deliver a partially or fully hot-dip galvanized version. The price depends on the height of the ordered expansion joint, adapted to the floor thickness. At the bottom of the expansion joint, we can add a geotextile skirt to prevent concrete from getting behind the formwork. Prices are quoted net. A prepayment of 70% of the gross order value is required upon ordering. After payment, we issue a VAT invoice. Production time is progressive, for smaller quantities up to three weeks. Example net price for expansion joint of 40 cm height – PLN 295.00/linear m Example net price for expansion joint of 25 cm height – PLN 235.00/linear m Prices may change. We also manufacture pneumatic dispensers for dispersed concrete reinforcement, expansion joint cord inserters, expansion cut cleaning machines, several types of chamfering machines for expansion cuts, power trowels, and concrete discs.

Condition: used, Used machine Cutting length 3000 mm with handwheel clamping Availability: short term Storage location: Röllbach Dksdpsw I Ul Ajfx Afnoh

Condition: used, Used machine Dkedjwka Rdepfx Afnjh Used veneer saw of the company Scheer type FM 2 - 3000 Clamping by handwheel integrated suction unit Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, functionality: fully functional, fuel type: gasoline, DGUV certified until: 08/2026, Year of construction: 2016, machine/vehicle number: 20161600285, Equipment: UVV, Wet and dry cutting in one machine Electronic soft start Perfect for indoor use Dedpfx Aexn Irnsfnskh In transport case Maintained and DGUV tested until August 2026 E-Check valid until February 2025

Condition: excellent (used), functionality: fully functional, overall weight: 23 kg, Year of construction: 2016, machine/vehicle number: 20161500027, Cutting of openings up to a maximum depth of 400 mm is possible in several work steps. Suitable for creating cut-outs and channels in concrete or masonry. Optimized engine performance thanks to efficient cylinder design, digital ignition system, and X-Torq engine technology. Cutting disc pair with very stable core and excellent cutting performance. Dodjxnm Ihjpfx Afnekh