Jointer & thickness planer combined

Panhans 445/A

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 Dedpfx Apjzd Hcqewewa GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, Equipment: CE marking, documentation/manual, saw blade guard, Screen control; parallel fence; storage for 20 programs; double roller carriage 3000 mm; cutting width 1000 mm; cutting height 200 mm; table extension 840 mm; three selectable speeds: 3, 4, 5 rpm. Dodpfxjy Nyuao Apwswa

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Dwsdpfsvnq Rksx Apwea Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Djdpfx Aon Argiopwjwa Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2026, CORMAK PT260Q 400V Planer Thicknesser – Professional Woodworking Machine The CORMAK PT260Q 400V planer thicknesser is a professional woodworking machine combining the functions of a surface planer and thickness planer. Equipped with an advanced integrated table system and a powerful three-phase motor, it ensures reliable operation and high precision when processing both hardwood and softwood. The machine is an ideal solution for carpentry workshops, production facilities, and any environment where efficiency, repeatability, and machining accuracy are essential. Main advantages of the machine Three-phase motor S6: 2.6 kW – enables long-term, stable operation with demanding materials without loss of performance. Integrated working tables – an innovative lifting mechanism allows simultaneous table adjustment, eliminating the need for repeated calibration. Stable cast iron construction – a 175 kg machine weight and precisely manufactured components reduce vibrations and ensure accurate planing, even with thin workpieces. Djdpfevxh A Sex Apwewa Quick function switching – an intuitive mechanism allows fast conversion from surface planer mode to thickness planer mode. Efficient chip extraction system – the Ø100 mm dust extraction outlet improves cooperation with extraction systems and keeps the working area clean. Construction and technology The CORMAK PT260Q is built on a rigid cast iron body with working tables designed for high resistance to deformation. The main tables are connected and adjusted simultaneously, eliminating setup errors typical of traditional folding-table designs. This technology not only speeds up machine preparation but also improves machining accuracy compared with older solutions. The 700 × 150 mm tilting aluminium fence with an adjustment range of 90°–45° enables precise angled processing of wooden elements. Precision and working efficiency The machine is equipped with a Ø75 mm cutter block with three 250 mm long knives, rotating at 4000 rpm, allowing perfectly smooth surface finishing. The maximum working width is 250 mm, while the maximum thicknessing cutting depth reaches 3 mm. The centrally mounted thicknessing table provides accurate height adjustment, and the 6 m/min feed speed ensures efficient processing of larger quantities of material. Standard equipment Ø75 mm cutter block with 3 knives 250 × 30 × 3 mm Integrated planer and thicknesser tables Adjustable aluminium fence 700 × 150 mm (90°–45°) Precision table height adjustment mechanism Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 250 mm Knife dimensions 250 × 30 × 3 mm Maximum surface planing width 250 mm Maximum thicknessing width 250 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1080 × 269 mm Weight 175 kg Motor power S1/S6 S1: 2.2 kW / S6: 2.6 kW Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Dsdpfxsyuu Scj Apwjwa Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: excellent (used), Equalizer: shaft width 260mm length of table 900mm 3 knife shaft Planer: planing width 250mm dimensions of the table 250 x 600mm maximum planing height 130mm feed rate 8m/min Milling machine: spindle diameter 30mm max tool diameter 90mm Dwedpfx Apjtur Epswsa Saw: cutting height 80mm blade diameter 250mm Drill: drill diameter 3-16mm table dimensions 210 x 360mm

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage Dwodpfxehfv Ehj Apwea They are constructed to storage liquid CO2. manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar test pressure: 30 bar Export from EU carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: used, Year of construction: 1998, machine/vehicle number: AB/118120, SECOND-HAND TILTING SPINDLE MOULDER SCM MOD. T110 I - CE RULES Dodpfxjwrfhke Apwswa - Volt. 400/50 - S/N AB/118120 - Year 1998

Condition: as good as new (ex-display), Year of construction: 2024, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scoring saw: yes Saw blade height adjustment: motorized Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Motor brake: yes / automatic Dwedpfskuzd Hjx Apwea Dust extraction connection: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg