Used Fittings for sale (2,292)

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Podoxc Hi Uopfx Af Aegr Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program Psdpfx Ajv Npw Eef Ajgr T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis

Condition: like new (used), functionality: fully functional, total width: 2,600 mm, total height: 1,250 mm, Motor power: 0.75 kW with a drill head for drilling corner bearings and olives automatic height sensing Psdpfx Aex Ez Uaef Aegr

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Pgodpjxmamujfx Af Asr Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: ready for operation (used), Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes Pgodjvu Hgzjpfx Af Asr boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Stationary drilling machine for furniture components, for drilling rows of holes and hardware, with a drilling head for rows of holes and a drilling head for hardware, specifically for HETTICH hardware. - Drilling unit adjustable in depth This allows, for example, 2 rows of holes to be drilled in parallel without having to move the workpiece. - Drilling motor 1.1 kW, 2,820 rpm - Pneumatic feed via foot valve, stroke 90 mm - Stop system with folding stops - Pneumatic workpiece clamping Pgodezbh Htepfx Af Aer - Quick-change system for drilling heads Existing drilling heads: - BKF-15/32 drilling head for rows of holes with 15 spindles, pitch 32 mm - 3-spindle drilling head for Hettich hardware Connection values: 400 V, 50 Hz, 3-phase

Condition: used, Year of construction: 1996, with 1 drilling head used in top condition cleaned Pgodpfx Afezkvyxe Ajr functionally tested Manufacturer: Hettich Type: Blue Max Mini Year of manufacture: 1996 Machine No.: 06316 CE type approval Number of spindles: 4 Drilling feed: pneumatic Table model, length x width: 800x400mm Swinging stops: 4 Drill chuck: shank 10 mm Dust extraction connection: 50mm Space requirement approx. L x W x H mm: 800x600x650 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, for furniture manufacturing Pgodpfx Afey Ay Dbj Aer used, in good condition With row drilling head Machine cleaned, function tested. Test run performed, Pneumatic hoses replaced, rubber protective guard replaced Manufacturer: Ganner Würth Type: Prebomat 32 Row drilling head with alignment pins mechanical Number of spindles: 7 with pressing die Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: used, Year of construction: 1994, machine/vehicle number: M51N1000.50, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 220 V, input frequency: 50 Hz, Blum Minidrill drilling machine with measuring rail and base cabinet. Pgedpfx Aezkp Tlsf Asr Base cabinet dimensions: L x W x H in cm: 210 x 60 x 86 cm.

Condition: good (used), Internal item no.: 25066 24 pcs. shrink fit chucks HSK-A63 Manufacturer: e.g. Haimer / SECO Pgjdpfxexdlpcj Af Ajr 3x D4 3x D6 3x D8 3x D10 3x D12 3x D14 3x D16 3x D20

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Pedpfjd N Sv Nsx Af Ajgr

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Pedpfxoxf Uuks Af Aogr Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Pgedpfxjhalvds Af Asr Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: new, Air feed fitting for ABEL piston diaphragm high pressure pump NEW. We need the pump type / series and the machine number from you. Psdpfx Ajiyp Thjf Aogr Almost all spare parts available from stock. Your reliable ABEL pump supplier, service partner and spare parts supplier for ABEL pumps.

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Pgodpfsiyp Tzjx Af Asr

Condition: used, Hettich Profi Fitting Drilling Machine 8-spindle drilling head (5 in a row with 32 mm pitch / 3 in front with 52 mm / 5.5 mm) Integrated row hole stops Pgsdeyyw D Topfx Af Aer 1 stop ruler extension, 2000 mm long Folding stops Drilling depth adjustment Connection: 16 A / 380 V Pneumatic connection 2 pneumatic material clamps Foot switch Motor: 0.75 kW Dimensions: 1000 x 600 x 880 mm (W x D x H) without table top

Condition: good (used), Year of construction: 1993, Würth Fitting Drilling Machine Prebomat II Year of manufacture 1993 Pgsdpfx Aeymynyjf Aor Complete in standard configuration with: Fully automatic pneumatic control in accordance with GS test, Oil brake and return stroke limiter for line boring, Electrical skip operation Motor 0.75 KW, 400 V, 1 stop ruler 900 mm 2 extension rulers from 1.25 m to 2.5 m 4 swivel stops Worktable 1000 x 430 mm 4-spindle drilling head with pressure lever Pitch 25/5.5/32 mm 7-spindle drilling head for line boring, pitch 32 mm with integrated indexing pins

Condition: excellent (used), Motor 0.75 Pgsdpfx Aetrtz Tsf Aer Number of spindles 4 Maximum material thickness 11 cm Number of pawls 3

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Features: * Various mounting plates for raw part handling * Raw part gripper * Second rack for increased part capacity * and much more Psdpfx Afsyk D Dyj Aogr This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, hole spacing: 32 mm, Ganner Gannomat belt and line boring machine Podpfjq E Ur Ajx Af Aegr Blum and Grass drill head 7 Spindle row hole drilling head incl. extension rulers 32 mm system pneumatic version

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Psdpfjzwul Hex Af Ajgr - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW Pgsdpfszvca Aex Af Aor • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Pgsdpezux Rbofx Af Aer Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Pedpfx Afjzux Iae Ajgr Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Vacuum table 6 supports (instead of 4) Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Psdpfx Ajzuxi Ref Aegr Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Parametric programming Remote maintenance package (internet-enabled)