Used Flame Spray Gun for sale (3,255)

Condition: used, functionality: fully functional, machine/vehicle number: 33530, mileage: 239,900 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Ndodpfxjz Hbr Ns Akqsc Further comparable vehicles are available upon request. Chassis designed for a 28-ton weight variant, OM471 engine, transmission oil cooler, disc brakes, Active Brake Assist, High Performance Engine Brake, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 tons, 3-leaf springs, air-suspended rear axle, rear axle 13 tons with differential lock, steerable and liftable 9-ton trailing axle, regulated water pump, transmission lock for auxiliary drive, daytime running lights, light sensor, trailer coupling Ringfeder (D40), tires: front and rear axles 385/65R22.5, middle axle 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,200/2,550/3,650; M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, navigation system, tinted windshield, sunroof, heated and electrically adjustable mirrors, electric windows, comfort central locking system, driver's comfort suspension seat, passenger's comfort suspension seat, multifunction steering wheel, reversing warning system combined with hazard lights, digital tachograph VDO, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-equipment for toll collection, air conditioning, refrigerator, cruise control, attention assist, traffic sign assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof-mounted rotating beacons, sun visor. Total volume 15.5 m³, usable volume consisting of an 800-liter fresh water tank and a 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free discharge or by pressing with the vacuum pump, floor flap over the entire cross-section to be opened upwards hydraulically, mechanical swivel locks, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, sludge tank level indicator with float and external scale (division of 500 L), sight glass for water tank, discharge skirt made of stainless steel, vacuum pump GardnerDenver RFW 200 DVL (1250 m³/h) with 685 operating hours, hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) with 681 operating hours, hydraulically driven, stepless pressure regulation, small manual HD hose reel with approx. 40 m HD hose DN13 and spray gun (with swivel joint), 5x LED work lights (one at the rear and two on the right and left), LED rotating beacon at the rear of the superstructure, suction hose boxes on the right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/balancing/discharge, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, trailer suction line, trailer hydraulics.

Condition: used, functionality: fully functional, machine/vehicle number: 34163, mileage: 19,900 km, power: 315 kW (428.28 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling with ring spring (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with remote control, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery master switch, pre-equipment for toll collection, pre-equipment for alcohol tester with immobilizer, air conditioning, cruise control, speed limiter, residual heat utilization, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Nsdpfsz Hcppsx Akqedc horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 14.5 m³ (sludge chamber approx. 13.5 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with inspection opening, 2-way piston lock: water/sludge approx. 2.4 m³/13.3 m³; 4.4 m³/11.3 m³, piston with 2 piston seals and seal pressure regulation, hydraulically upward-opening full-cover lid with hydraulic latch (galvanized) and one suction connection at the bottom and top, sludge chamber level indicator with external scale with divisions of 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the control panel, over-suction protection, oil separator, HD pump Pratissoli KF 32H (approx. 120 l/min at 170 bar) hydraulically driven, protection against water shortage, pressure regulation steplessly, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 19, 40 m are available, spray gun, suction boom hydraulically pivoting (approx. 270°) with a suction hose DN 100, at the end there is a suction pipe DN 100 with a length of approx. 3500 mm, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash tank 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon light at the rear, reversing camera

Condition: ready for operation (used), Siemens Simodrive 6SC6100-0GC08 462 010.9062.08 power supply, used, in good condition, 100% fully functional, scope of delivery as per photos. Ndedpfxez Acn To Akqsc

Condition: ready for operation (used), Siemens Sinumerik 6FC5147-0AA14-0AA2 flat operator panel without power supply, used, in good condition, 100% functional, scope of delivery as per photos Ndsdpoz Acq Uefx Akqec

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Nodpjzu T Smjfx Akqodc Sold on behalf of a customer! Technical data without guarantee!

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface Nodszz Tz Ijpfx Akqodc * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device Ndedpodqkrwsfx Akqec - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Year of construction: 2007, condition: good (used), Laboratory fume hood, fume hood, extraction cabinet, extraction fume hoods, fume hood system for pharmacies, chemical and medical applications, extraction system, filter system -Extraction: aggressive, chemical gases -Internal dimensions: 540/850/H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW Ndodpfxsb Uhnqs Akqec -Suction type: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System Ndsdpfx Aobu Dzijkqsc The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: reconditioned (used), functionality: fully functional, pressure: 195 bar, input voltage: 400 V, overall weight: 222 kg, warranty duration: 6 months, fuel tank capacity: 30 l, KRÄNZLE THERM 895-1 HOT WATER PRESSURE WASHER NEW FUEL PUMP The unit comes with new accessories, including a gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. The high-pressure hose reel makes winding and storing the hose easy. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 195 bar and 895 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: KRANZLE THERM 895-1 Nodpfx Ajz N A T Uokqedc Supply voltage [V]: 400 Flow rate [l/h]: 895 Operating pressure [bar]: 195 Heating power [kW]: 6.4 Hose length [m]: 20 Fuel tank [l]: 35 Weight [kg]: 222 EQUIPMENT: NEW fuel pump NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Clear, intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: new, empty load weight: 4,830 kg, overall weight: 44,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/55R22,5, Equipment: ABS, truck registration, | D-Tec VCC Container Chassis | Center and rear extension | 1st axle can be lifted | VALX axles with disc brakes | Tires: 385/55 R22.5 | New vehicles | Subject to errors, typing errors, and prior sale. Ndedpjzrxbhsfx Akqoc

Condition: ready for operation (used), Siemens C79451-A3247-B71 power supply C4 051722, used, 100% functional Njdjzzhncspfx Akqsdc

Condition: new, driver cabin: other, gearing type: other, Additional information: * GRG 650 ditch cleaning device * Hydraulically adjustable discharge chute * Electro-hydraulic switching valve Njdpfx Aozznlnekqjdc Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transportation and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may differ. Price applies to the current condition. * All information without guarantee.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, number of axes: 3, This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details. Table Clamping Surface: 4350 x 900 mm (with 7 T-slots 18H7 RTA integrated)Swivel Head: Stepless positioning swivel headNC Rotary Table: Type RTA 4 L - 800Spindle Speed Range: 40 - 12,000 rpmSpindle Taper / Tool Holder: SK 40 DIN 69871-A (Hohlwellenmotor, water-cooled)Spindle Note: Spindle replaced/renewed a few years ago for nearly €30,000Tool Changer: 36 positions, movable in Y-directionConnected Load: 69 kVAVoltage: 3x400V/230V/N/PE, 50 HzControl Voltage: 24 V DCFuse Protection: max. 125 AAdditional Equipment:External band filter coolant system Type SA 25/600 (30 bar, 400 Liters)Slat conveyor chip conveyor Type FSB 300 (discharge height 1200 mm, left side)Minimum quantity lubricationElectric handwheel HR 4103D Touch Probe Type MP 10 EVisport (Fabrikat Hema)Heat exchanger Type SK3328 (Fabrikat Rittal)2 Hand spray guns Ndodpez Iyppsfx Akqjc Technical Specification Taper Size SK 40

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2 h, functionality: fully functional, Exhibition machine, 2 units available, used. Unfortunately, it is too large and too heavy. Nodpfszuv Dlex Akqjdc

Condition: excellent (used), Product description: Model: RKR!200/2 Nsdpfxezua Eao Akqsdc Cleaning basin on a stable base with cross braces. The perforated sheet made of galvanized steel is set into a basin with a conical outlet. The rear and side walls are hot-dip galvanized and equipped with edge protection. • Self-priming pneumatic drum pump • Dimensions: 120 x 80 x 133 cm (L x W x H) • Load capacity: approx. 30 kg • Working height: approx. 1040 mm Model: RKR!200/2!D

Condition: used, functionality: fully functional, machine/vehicle number: 32059, mileage: 98,300 km, power: 235 kW (319.51 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 10.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, front axle with leaf springs, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, Connectivity-Board module (RIO Box), sun visor on driver's door Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 10.5 m³ (sludge chamber approx. 10 m³ / water chamber approx. 0.5 m³), vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel for 60 m HD hose DN 13, 40 m installed, spray gun, water chamber is welded into the front of the container with inspection opening, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, rear door hydraulically opens upwards over the entire cross-section with pipe breakage protection, hydraulic latch, sludge chamber level indicator with external scale with division every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge chute made of stainless steel, 2 pneumatically operated slide valves, container emptying: free discharge through the lower suction connection or by tilting backwards, 4-way valve pneumatically controlled from the operating station, over-suction protection, oil separator, operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left on the container, 1x LED rotating beacon at the rear, reversing camera Nsdpfx Aez E Hg Nokqodc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36014, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 06/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Ndedpfx Akez Hkkujqec Further comparable vehicles available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Cylindrical container designed as a tipper (tipping angle min. 35°), total volume 15 m³, usable volume approx. 14 m³ sludge compartment, container wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total water capacity of approx. 1800 l, vacuum pump CVS Vacustar 1300, hydraulically driven, transport reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulically driven HD reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), container discharge via free outlet or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic locking of the retaining lugs, sealing of the closing bottom in NBR, one bulkhead in the container, lower and upper suction port with Perrot DN 100 and with pneumatically operated slide valve, sludge compartment level indicator with float and external scale (division per 500 L), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport reel up/down, lower suction port on/off, upper suction port on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36016, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 07/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Ndodpfxoz Hkpds Akqec Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor horizontal tank, total volume 15 m³, useful volume approx. 14 m³ sludge chamber, tank wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total of approx. 1800 l water capacity, vacuum pump CVS Vacustar 1300 (approx. 1,300 m³/h) hydraulically driven, transport hose reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding in/out adjustable, HD pump Pratissoli KT30 (80 l/min at max. 175 bar) hydraulically driven, stepless pressure regulation, small hydraulically driven HD hose reel with approx. 50 m HD hose DN 13 and spray gun (with swivel joint), tank emptying by free outflow or by pressing with the vacuum pump, bottom flap over the entire cross-section hydraulically opening upwards, hydraulic locking of the knag, sealing of the closing bottom in NBR, one baffle plate in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, level indicator for sludge chamber with float and external scale (division of 500 l), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel in/out, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: reconditioned (used), functionality: fully functional, pressure: 160 bar, input voltage: 400 V, overall weight: 140 kg, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-49 X HOT WATER PRESSURE WASHER BUILT-IN HOSE REEL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Double lance with two nozzles makes a pressure regulation possible A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6.9 Detergent tank [l]: 10 Hose length [m]: 20 Weight [kg]: 140 EQUIPMENT: Built-in hose reel NEW heavy-duty spray gun (German brand R+M) NEW double lance with pressure setting NEW reinforced 20m high-pressure hose with steel braiding Nedpfjz Egq Iox Akqodc NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Ndodpfx Aksz Dxr Ijqoc Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: new, operating pressure: 275 bar, pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Njdpfxoz Dv Tce Akqsdc Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36017, mileage: 3,990 km, power: 335 kW (455.47 HP), first registration: 08/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, rear view camera, 2 rotating beacons on the cab roof, sun visor Nedpfxsz Hk Uge Akqedc horizontal tank, total volume 15 m³, useful volume approx. 14 m³ sludge compartment, tank wall thickness 6 mm, 4 side water tanks (each 450 l) made of plastic with a total of approx. 1800 l of water, vacuum pump CVS Vacustar 1300 (approx. 1,300 m³/h) hydraulically driven, transport hose reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure regulation, small hydraulically driven HD hose reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), tank emptying via free discharge or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide gate valve, sludge compartment level indicator with float and external scale (division of 500 l), sight glass for water tanks, discharge apron made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes on the right and left made of stainless steel, waste box mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel up/down, lower suction connection open/close, upper suction connection open/close, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 x at the rear). 1x rotating beacon at the rear, rear view camera, trailer suction line, trailer hydraulics.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, total length: 1,000 mm, high-pressure hose length: 10,000 mm, total height: 950 mm, total width: 800 mm, pressure: 320 bar, fuel: regular/benzine 91, overall weight: 150 kg, fuel tank capacity: 21 l, High-pressure cleaner, 25 hp, CLENA BMK, 21 l/min, 320 bar Discontinued model – available at a reduced price! Includes accessories: - 10 m high-pressure hose, DN10, with kink protection on both ends - High-pressure gun HDP350 Njdpfx Akjz Hybijqedc - Double spray lance including high-pressure nozzle

Condition: used, 2 KREMLIN painting pumps Ndodpfx Akszyfx Neqsc Spill containment tray support Pipes and spray guns included