Used Flexible for sale (2,966)

Condition: used, Year of construction: 2009, operating hours: 4,689 h, 2009 | Haulotte H23TPX (23m) | Used Telescopic Boom Lift | 4689 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Csdpfjy U Nlfsx Al Rjrc 👷‍♂️ Inspected by an independent expert 53 inspection points 37 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the Platform, presence of impacts on the sides of the basket and complaint from the lower part. Presence of oxidation and damaged paint. The losses of rubber are heavily damaged. Significant impact on the right front rim. The engine hood is held by straps, the original fastening systems do not work. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40872 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, operating hours: 3,633 h, 2008 | Genie Z-45/25 J RT (16m) | Used Articulated Boom Lift | 3633 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Codpfx Ajy U Nk Uel Rjrc 💰 Buy Now for EUR 11400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 45 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the Boom Lift, only the paint is damaged with some presence of rust. The bucket is also damaged with deformations of the smooth guardrails and the low complaint. The safety instructions on the bucket are missing. The quality of the engine oil needs to be checked. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40867 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, 2008 | Iveco Rolloff | Used Roll Off-Tipper Truck | 302955 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points 34 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Operating truck, crack in hookarm , noise in left steeringlinkage, not tested on road , several mallfunctions 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40877 Equippo" is commonly used when looking up more details online. Cjdey U Nk Iopfx Al Rerc 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2010, 2010 | Schmidt SKI 24 | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 11 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rear door doesnt shut well , left stampframe cracked needs to be repaired, video of tipping Will be made by owner 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40862 Equippo" is commonly used when looking up more details online. Codey U Nkuopfx Al Rorc 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2006, 2006 | Renault Premium 440 | Used Tractor Unit | 572622 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 33 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating truck , truck not tested on Road 📄 Want to see the full inspection, extra photos, or a video? Credpfx Aloy U Nkne Rjc Tip: The reference "40861 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinmerik One, workpiece height (max.): 500 mm, workpiece diameter (max.): 675 mm, workpiece weight (max.): 500 kg, total height: 3,610 mm, total length: 3,970 mm, total width: 3,523 mm, table load: 500 kg, rotary table diameter: 600 mm, rotational speed (max.): 14,000 rpm, overall weight: 11,800 kg, spindle speed (max.): 14,000 rpm, coolant supply: 15 bar, distance table to spindle center: 175 mm, distance table center to spindle nose: 400 mm, spindle motor power: 37,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, HWACHEON D2-5AX Anniversary Model – The intelligent entry point into 5-axis machining The new HWACHEON D2-5AX was specifically developed to enable companies to make an economical and, at the same time, high-performance entry into modern 5-axis machining. As the official anniversary model from HWACHEON, it combines the highest manufacturing quality, modern control technology, and maximum flexibility for a wide range of applications. Whether it's single-part production, toolmaking, prototype construction, or automated series production – the D2-5AX impresses with its high precision, reliable processes, and a compact design with a generous work area. With travel ranges of 650 x 500 x 500 mm and a powerful rotary table with a 600 mm diameter, complex workpieces can be manufactured in a single setup. This reduces setup times, increases accuracy, and sustainably enhances productivity. The standard equipment includes an automatic BLUM tool measurement system ZX Speed and a BLUM workpiece measurement system. This minimizes setup times and ensures a high level of process reliability. Technical highlights • Travel ranges X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive • 30-tool magazine • Automatic tool measurement system BLUM ZX Speed • Automatic workpiece measurement system BLUM • Compact and stable machine construction • High dynamics and precision • Suitable for single parts, small series, and series production • Optimized for modern manufacturing requirements Control options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum connectivity and digitalization • Fanuc 31i-B5+ for the highest reliability and ease of operation in 5-axis operation • Optionally also available as an economical Fanuc 4+1-axis version Your advantages ✔ Economical entry into 5-axis machining ✔ Reduced setup times through complete machining in a single setup Codpfx Ajzaql Nsl Rerc ✔ High manufacturing quality and process reliability ✔ Future-proof control technology ✔ Ideal for training centers, toolmaking, contract manufacturers, and production companies ✔ New machine with state-of-the-art HWACHEON technology The HWACHEON D2-5AX offers an exceptional combination of precision, performance, and economy, making it the ideal solution for companies looking to take their manufacturing to the next level. Further information, technical data, and individual equipment options are available upon request. Contact: Benjamin Hoffmann – ACROLOC Werkzeugmaschinen GmbH.

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Cedpfem E Ty Njx Al Rjrc

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Crsdpouyg Erefx Al Rjc

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Cedpfx Alsyfl Uve Rsrc

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Cjdpfeyq N Iqsx Al Rorc

Condition: new, The FPK 4.3 is a powerful toolroom milling machine that belongs to the category of Conventional Vertical Milling Machines. This versatile tool-milling machine, renowned in tool and mold making, offers a compact design that combines flexibility with ease of use. The premium cast-iron machine column ensures maximum dynamic rigidity and constant precision, complemented by precision preloaded ball screws on all axes for enhanced performance. Operators will appreciate the ergonomically arranged controls and the swivelling control panel that, alongside the standard digital position indicator, provide maximum comfort. With a large work table measuring 400x800 mm and a travel capacity of 500 mm on the X-axis, the FPK 4.3 is perfect for diverse applications in both training and manufacturing environments. Additionally, it features an automatic feed on all axes with infinitely variable speed settings, and a rigid outer arbor for horizontal milling, making it robust yet precise. Explore the extensive accessory package and take advantage of KNUTH’s reputation for quality – order online today and elevate your workshop with this exceptional milling machine. Crodpfx Alsuyh Die Roc

Condition: as good as new (ex-display), The KMT M 1303 Guillotine Shear from KNUTH is engineered for precise and reliable cutting, making it an essential tool in the Sheet Metal Processing category. Featuring a robust solid steel construction, this modern plate shear is equipped with a powerful drive motor that allows for efficient operation. With its straight cutter angle, it minimizes workpiece torsion during cutting while providing a high-precision manually adjustable back gauge for exact positioning. The dual-sided reversible upper cutters and four-edge lower cutters enhance the lifespan and versatility of the machine. Ergonomically designed, the bright LED illumination of the cut line and a clear view from above ensure accurate alignment. A mobile foot switch offers operators the flexibility to manage the workpiece safely, while essential features such as a cut counter and accessible lubrication points promote efficient maintenance. This reliable and powerful Guillotine Shear is perfect for your workshop needs—request a quote today to enhance your Sheet Metal Processing capabilities with the KMT M 1303. Codpfjww Uaaex Al Rsrc

Condition: used, The FPK 5 is a top-of-the-line Conventional Vertical Milling Machine within the Toolroom Milling Machines category, offering a versatile and robust solution for various milling applications. This universal tool milling machine stands out with its vertical and horizontal spindle configuration, swiveling vertical head, and extensive clamping surfaces, making it an excellent choice for tool and mold making, repair workshops, and educational environments. Designed for flexibility, the FPK 5 excels in single-part construction and small to medium-sized batches, thanks to its easy setup and reliable operation without extensive programming. The machine features exceptional rigidity and performance, a heavy fixed-angle table with high load capacity, and a manual central lubrication system for optimal maintenance. With standard equipment that includes a coolant system, 3-axis position indicator, and easily accessible controls, the FPK 5 is engineered to enhance efficiency and precision. Experience the reliability of KNUTH engineering with this advanced milling machine; buy now to elevate your machining capabilities. Crodpfx Aewut Evsl Roc

Condition: used, Year of construction: 2018, machine/vehicle number: SCIAC44, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Credpfevhcplex Al Rjc Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines. Given that this machine has seen minimal prior usage, it adds to its reliability. With a speed of 900 BPH, the LINE6 model certainly meets the needs of high-production plants. Conclusion of the Rinsing Machine Aesse Service In conclusion, the Used Rinsing Machine Aesse Service LINE6 year 2018 offers an efficient and versatile solution for handling glass bottles of various sizes and capacities. Its compact design and high-quality construction, for in...

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Total stroke: 98 mm Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. Crodovb Icdjpfx Al Roc With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Crsdpfxexy Tm Is Al Rec

Condition: used, Year of construction: 2018, functionality: fully functional, turning diameter: 1,000 mm, turning diameter over bed slide: 710 mm, turning length: 8,000 mm, Used heavy-duty lathe with extensive steady rest equipment – ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm was specifically designed for pipe machining applications. The sophisticated machine design allows the cutting edge to easily pass the open steady rests – ideal for precise machining of long, hollow workpieces. Technical Highlights: • Turning diameter over bed: 1,000 mm • Turning diameter over support: 710 mm • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency converter, continuously variable Design advantages: • Machine bed cast in one piece and artificially aged – for maximum stability and stress-free operation • 5 hardened and ground guideways for maximum precision • Continuous feed control of the longitudinal axis via ball screw – no Norton or lock-box gearing • Electric-driven tailstock with hydraulic clamping • Manually adjustable cross support with trapezoidal thread spindle • 4-station tool carrier, manually pivoting Crodpsv Tnttsfx Al Rjc • Triple-guided turning support – for extremely smooth running Steady rests & tube processing: • Various steady rests (stationary and follow-on) optional Available • Motorized steady rest carriers with hydraulic clamping • Spindle adjustment conveniently possible from the operator's side • Traveling steady rests can be mounted either on the left or right Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise machining of tubes. The continuously variable speed and feed control ensures high flexibility and ease of use.

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Crjdpfx Asv Tnhwol Rec Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: used, Year of construction: 2000, functionality: fully functional, Used Cylindrical Grinding Machine Reckord M 1432 B The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum infeed setting of just 0.0025 mm and outstanding roundness accuracy, it is ideal for demanding grinding tasks in both single-part and series production. Your advantages at a glance: Maximum precision: Minimum grinding wheel infeed of 0.0025 mm ensures top surface finishes and form accuracy. Cedpjyxgldjfx Al Rorc Exceptional flexibility: External, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) for tapers and complex geometries. Robust construction: Heavy-duty machine bed weighing approx. 4,000 kg for maximum rigidity and vibration damping. Powerful drive: 4 kW grinding wheel motor for rapid stock removal and short machining times. Ergonomic operation: Clearly arranged controls for rapid operator familiarization and intuitive handling. Technical Data Manufacturer: Reckord Model: M 1432 B (Model 1000) Type: Universal cylindrical grinding machine Centre height: 180 mm Max. grinding length: 1000 mm Max. grinding diameter: 315 mm Max. workpiece weight: 150 kg Workhead speeds: 40, 72, 128, 228 rpm Grinding wheel dimensions: 400 x 50 x 203 mm Grinding motor output: 4 kW Total power consumption: 7.8 kW Machine weight: approx. 4,000 kg Machine dimensions (L x W x H): 3240 x 1760 x 1680 mm Colour: Blue (as existing) Condition: Used, fully checked and operational Availability: Immediately ex stock Stockstadt Additional Information Scope of delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully checked and operational. Technical documentation: Supplied in German. Optional services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing options on request. Inspection: The machine can be inspected by appointment in Stockstadt am Rhein.

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Crsdpfx Aohx R Dksl Roc Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn Cjdpoqwqiasfx Al Rsrc 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E22SH15072467031, This listing is for a Rational SCC 202 WE electric combi-steamer, manufactured by the premium brand Rational. This XXL-format combi-steamer offers capacity for 20 x 2/1 GN trays or 40 x 1/1 GN trays. The unit is from the year 2015 and has undergone a comprehensive inspection in our in-house workshop; it is fully operational. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational service partner anywhere in Germany. Looking for a specific Rational model? Ask us! We have access to an extensive range of used and new equipment. We are pleased to advise you on all Rational model types, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to replacement of defective parts without installation or removal costs • High-quality branded units at fair prices • Professional refurbishment, inspection, and expert cleaning • Flexible shipping or pickup options • Competent advice before and after purchase • Provision of operating manuals, connection diagrams, and spare parts • DGUV V3 safety inspection This combi-steamer accommodates 20 x 2/1 GN or 40 x 1/1 GN containers. In automatic mode, the oven automatically detects the ideal cooking path, load size, amount, and product-specific requirements for 7 applications (meat, fish, poultry, sides, egg dishes, baked goods, and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening for transport (W x H): 1145 x 1900 mm • Power supply: V: 400 / kW: 65.3 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SH15072467031 Credpfxsym Dd Sj Al Rjc • Year of manufacture: 2015 Condition: Used, freshly inspected, fully functional Further specifications: • Three operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) • Core temperature probe • Retractable hand shower • 8.5" color display with touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic pre-selection of start time • 7 cleaning programs for unattended cleaning, including overnight • Adjustable humidity in 3 stages (30°C to 260°C) • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber design with rounded corners • Halogen chamber lighting • Meals per day: 300-500 Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or wish to view the unit on site? You can reach us by phone during our business hours: Monday-Friday 09:00–13:00 and 14:00–17:00. Sale only according to our General Terms and Conditions (AGB).

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 4082149208, The twin electric fryer with a capacity of 14+14 liters and a base unit, model Z7FREH2E00, is an outstanding choice for professional kitchens or commercial markets. This unit offers high performance, allowing simultaneous frying of large quantities of food. Designed specifically for intensive use in catering businesses or busy TO GO outlets, this double fryer is built for durability and efficiency. You will receive an invoice with VAT shown separately. Technical Data: - Dimensions (W x D x H mm): 800 x 720 x 942 - Basin (W x D x H mm): 240 x 380 x 285 - Cabinet (W x D x H mm): 680 x 640 x 420 - Model: Z7FREH2E00 - Serial Number: 4082149208 - Capacity per basin: 2 x 12–14 liters - Electrical supply: 17.4 kW / 3-phase / 400 V - Temperature range: Operating temperature: 105 to 185 °C - Weight: Gross: 83 kg, Net: 81 kg - Year of manufacture: 2024 Condition: Used, fully operational (in use for 2 weeks) Features: - Free-standing electric fryer with two directly heated standard basins, each with 14-liter capacity - 1.5 mm thick front and top panels made from CNS (chrome-nickel steel), side and back panels in stainless steel with Scotch-Brite finish, all-round rounded edges - Standard basins with directly heated internal heating elements - Adjustable operating temperature from 105 to 185 °C, thermostatically controlled - Min / max fill levels per basin: 12 / 14 liters - Height-adjustable feet (+50 mm) Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of faulty components (excluding labor) - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Checked & fully functional – or your money back - Flexible shipping or collection options - Competent advice before and after purchase - Provision of operating instructions, wiring diagrams & spare parts - DGUV V3 electrical safety test carried out Cjdpfx Aljxwyc Re Rorc Shipping: - Delivery or collection by arrangement - Worldwide shipping available on request - Shipping to islands or mountain stations only by prior arrangement Subject to change and error.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: •SN:749951, ASK FOR YOUR SPECIAL PRICE!!!!! Here we offer a 150-litre round pressure boiling kettle (FES 150) from the premium manufacturer Küppersbusch (Phoeniks). Draining is made easy with a safety drain valve. The pressure boiling kettle features an electronic temperature controller and an innovative KCI touch panel control system. Codpsv Iku Njfx Al Rerc The unit has undergone a comprehensive inspection in our in-house workshop and is fully operational. The pressure boiling kettle is virtually unused and in excellent condition. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded equipment at fair prices • Professional overhaul / inspection & thorough cleaning • Tested & fully functional – or your money back • Flexible options for shipping or collection • Expert advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 certification Technical details: • W x D x H: approx. 100 x 85 x 90 cm • Power connection: V: 400 / kW: 23.1 • Type: FES 150 • Serial no.: 749951 • Year of manufacture: 2015 Condition: Used, fully serviced, fully functional Warranty conditions: Please note that units with a three-phase connection (400V), water connection, and/or gas-powered devices may only be connected by a company certified by the manufacturer! Warranty claims are valid only with submission of the commissioning protocol. Further features: • Usable volume: 155 litres • Low-maintenance, sealed PERMAPRESS system • Device switch, power selection switch • Electronic temperature controllers with setpoint and actual value display • Lid drainage via discharge pipe • Fixed electrical connection • Fill level marking, with 10-litre gradations • Continuous boiling function • RS 485 interface • Standard safety interlock • Double-wall lid, spring-balanced • 4 quick selection options for temperature and cooking time • Water inlet via lid-operated swing arm fitting • Mixing tap with hot and cold water valves • IPX5 Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement If you have any questions, would like advice, or want to inspect the equipment on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00.

Condition: used, Year of construction: 2019, operating hours: 8,600 h, 2019 | Caterpillar 966 M XE | Used Wheel Loader | 8600 hours Cedpfx Aljyywnlo Rsrc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 104500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 55 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine clean nothing to report 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40575 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.