Used Fmz 5000 for sale (2,147)

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm Hedpfx Aou Nwwdef Aofk total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Hjdjwc R Udspfx Af Aofk Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system Hsdpfx Ajdnfdljf Ajfk External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 2021, operating hours: 7,173 h, load capacity: 5,000 kg, empty load weight: 1,400 kg, mileage: 7,173 km, This electric tractor from the STILL brand is from 2021 and is in good condition; The tractor has a capacity of 5,000 kg; The Lithium battery WITHOUT charger Watch the video on YouTube Hfsdpswcnp Sofx Af Aok

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Hfjdszc Hkyjpfx Af Ajk

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Hfsdpfxsr Nfvms Af Ask Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2019, condition: like new (used), machine/vehicle number: 1810001-01, DARTEK TAR 1200/5000 VIBRATORY SCREEN, designed for the efficient classification and separation of bulk materials in industrial recycling and material processing applications. The unit is equipped with a separation system consisting of a bar screen (finger screen) and a mesh screen, allowing for flexible separation in multiple stages. Hfodpfxozcm T Ue Af Aek • Type: Vibratory screening system • Configuration: Finger screen (bars) + mesh screen • Application: Size-based classification and separation of mixed bulk materials • Status: Available for inspection • Current condition: In industrial condition (or disassembled/stored, if applicable) The system is designed for high-capacity screening operations, enabling efficient separation of materials according to their size and type. The finger screen is suitable for coarse separation and handling of bulky or irregular materials, while the mesh screen allows for finer classification of smaller particles. The vibratory system ensures a constant flow of material and optimal screening efficiency, reducing blockages and improving performance in demanding recycling and sorting environments. The equipment is suitable for recycling plants, quarries, and material recovery facilities where reliable and continuous screening performance is required.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: FANUC, spindle speed (max.): 20,000 rpm, spindle motor power: 37,000 W, number of axes: 4, This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details. • Rapid traverses • X/Y/Z: 60 m/min • Cutting feedrate: 1–30,000 mm/min • Ballscrews: Ø45 x P20 • Accuracy • Positioning: ±0.003 mm (full stroke) • Repeatability: ±0.0015 mm • Measurement system • X/Y/Z/B: absolute pulse encoders • Optional linear guides on X, Y, Z • Distances • Spindle nose to table center: 100–980 mm • Spindle center to pallet surface: 80–810 mm • Spindle • Speed: • Standard/high-torque: 15,000 rpm • High‑speed option: 20,000 rpm • Base speed: • Standard: 1,200 rpm • High‑speed option: 1,800 rpm • Motor power: • Standard: 30 / 22 / 18.5 kW • High torque option: 37 / 26 / 22 kW • High‑speed option: 37 / 30 / 26 / 18.5 kW • Max. torque: • Standard: 229.9 / 206.9 / 147.2 / 119.4 Nm • High torque: 303 / 261 / 204 / 147 / 119 Nm • High‑speed option: 221 / 200 / 156 / 98.1 / 79.6 Nm Hedpfxjy Tluaj Af Aofk • Tool clamping force: 9.8 kN (15.7 kN with HSK spindle) • Transmission: Integrated drive • Axis motors • X: 5.5 kW (7.37 hp) • Y: 4.5 kW (6.03 hp) • Z: 5.5 kW (7.37 hp) • B indexing motor: 1.4 kW (1.88 hp) • B 0.001° motorized: 2.7 kW (3.62 hp) • B axis / rotary table • Indexing: 1° indexing; 0.001° rotary table • Positioning accuracy: ±3" (±6" for rotary table) • Repeatability: ±1" (±4" for rotary table) • Max rapid rotation: 30 rpm • Clamping force: 93 kN • Clamping torque: 4327 Nm • Pallet • Size: 500 x 500 mm • Type: Threaded pallet; T‑slot pallet • Pattern: 24‑M16 x P2.0; 5‑18H8 • Machine travels reference • X/Y: 28.74" • Z: 34.65" Technical Specification Taper Size ISO 40

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Hsdpfx Aelnlmvjf Asfk

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 300 mm, Manufacturer: STOLLE Type: SDT Year of manufacture: 2000 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 300 mm Number of T-slots 5 Distance between T-slots / pitch 400 mm T-slot size 36 mm Number of matching pieces Hodpjwp Emzsfx Af Aefk 1 Dimensions (Estimated) Length 5000 mm Width 2000 mm Height 300 mm Weight 8000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2012, total height: 290 mm, total length: 5,000 mm, total width: 1,750 mm, plate height: 290 mm, Manufacturer: STOLLE Type: Cast Iron Specifications Metric US Standard Length 5000 mm Width 1750 mm Height 290 mm Number of T-slots 10 (7+3) Distance between T-slots / pitch 7x 250 - 3x 500 mm Hsdpfjwp Azvox Af Asfk T-slot size 27 mm Weight per plate approx. 8.2 tons Number of matching pieces 1 Dimensions (approximate) Length 5000 mm Width 1750 mm Height 290 mm Weight 8200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details. Share on

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Hedpfx Afsrg A N Nj Aefk Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard Hfodpfsvd Ddcsx Af Ask X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Hfodpfx Ajwp Eqysf Aok Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Condition: used, functionality: fully functional, machine/vehicle number: H2X386J14012, Year of construction: 2018, operating hours: 5,006 h, load capacity: 2,000 kg, lifting height: 4,620 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, empty load weight: 2,900 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386J14012 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2018 Hodpfxozd H Nkj Af Aofk 3rd valve, 4th valve, semi-cabin, Integrated attachment

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 Hedeyxy S Djpfx Af Aefk In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) Hjdpeidma Nofx Af Aofk +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,000 h, degree of automation: automatic, laser source manufacturer: TRUMPF, laser hours: 1,860 h, laser power: 3,000 W, TruLaser Tube 5000 fiber Laserpower: 3000W Year of manufacture: 04/2022 Machine on: 3100 h Laser on: 1860 h (!) Machine:  Feed station with self-centering clamping jaws  Tube support (raw material) with automatically retractable tube supports  Feed-through chuck with self-centering tensioning rollers  Adaptive clamping system for the feed-through chuck  Work area illumination  Tube support (finished part) with extendable guide rollers  Finished part deposit (contains one conveyor table and conveyor table extension)  High-precision drives TRUMPF laser  Excitation using pump diodes  Laser power control  Laser log function  Closed beam guidance via laser light cable (LLK) Cutting head  Lens cutting head with 150 mm focal length  Magnetic coupling Control  TRUMPF control system based on Sinumerik 840D SL  Integrated technology data  Auto switch on and shutdown  Programmable cutting gas pressure  Remote support interface  Pivoting control panel with 19” touch screen  Condition Guide Functions  AdjustLine  ControlLine  FocusLine  NitroLine  PierceLine Data transmission  USB interface  RJ45 network interface  Central Link  Online Update Manager Accessories  Clamping jaw pair up to D 152 mm  Guide rollers, round/rectangular tubes  Ceramic part (one piece)  Cutting nozzles start-up set Safety  CE marking and EC Machinery Directive  Protective cabin with laser protective screens  Monitoring system for gas pressure, temperature and cooling water  One and two-beam safety light barriers Advanced standard configuration  Machine bed for 6.5 m raw material length  LoadMaster Tube for 6.5 m raw material length (including bundle space)  Part-removal station for 3 m finished part length (including scrap conveyor belt with container)  Compact dust extractor  Laser process cooler (water-air) Bevel cut technology package  Bevel cutting up to maximum 45°  Contains electrically movable feed-through chuck  Application-specific restrictions may arise depending on the respective material properties or the desired machining process Front LoadMaster Tube installation Hfjdpfxozh H Axs Af Aok +1,5m unloading (max 4,5m)

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece weight (max.): 700 kg, controller manufacturer: Mazatrol, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, controller model: Matrix Nexus, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Hedpfx Aey N Addof Aefk Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Magazin capacity 80 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Hsdey N N Suopfx Af Ajfk Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: used, -Total length: approx. 3,500 mm Hfodpowxyk Tjfx Af Aek -Conveyor belt width: 650 mm -Output: 4,000 to 5,000 croissants per hour, depending on piece weight (30–40 g per piece) -Maximum dough thickness: 15 mm -Belt speed: adjustable between 30 and 150 mm/s -Serial number: A-5487 -Electrical power: 1.7 kW -Voltage: 400 V / 50 Hz -Year of manufacture: 2006

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) Hsdpfx Aoy Tbzvef Aofk delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN Hfsdpfx Astqqr Eef Ajk ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Hjdpfx Aezcla Hof Asfk Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: used, Year of construction: 1999, Technical details: Hfjdpfswvkgmjx Af Aok screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN