Used Forestry Equipment for sale (40,878)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Swivel ramps Equipment: - Individual ramps - Steel side panels - 20x lashing points Net: €5,756.30 / Gross: €6,850.00 Article number: UBA235361800.01 Technical data: • Brand: Unsinn • Model: UB 3618-35-14 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 360 x 180 x 30 cm • External dimensions (L x W x H): 558 x 230 x 203 cm • Loading height of the floor: 45 cm • Permissible total weight: 3,500 kg • Tare weight: 770 kg • Payload: 2,730 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New with ramps that can be folded out to the side for loading with a forklift • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Loading area made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • Hollow profile construction, welded and completely hot-dip galvanized • Body made of stable steel side panel profiles • 10 pairs of load securing points, loadable up to 2000 daN per lashing point • Frame completely hot-dip galvanized • Optional with bucket rest • 2 pcs foldable and side-adjustable aluminum ramps (load capacity of 3500 kg/pair) • Integrated floor support • Ramps that can be swivelled out to the side • Very low chassis for a low approach angle • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center • Premium maneuvering handle with tension strap winder _____ Dsdpfx Ao Aiclbji Eowd Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: like new (used), operating hours: 300 h, ASCO A120P Dry Ice Pelletizer 300 h A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transportation. Specifications Brand: ASCO Type: A120P Operating hours: 300 hours Ready for immediate use Major maintenance performed (2024) Service documentation available The machine comes with the original documents, including: Djdo Ad U Hnopfx Ai Eewd Original ASCO service report Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, *IMMEDIATELY AVAILABLE* Incl.: badge_aluriffel Equipment: - Low loading platform - Walkable fenders - Ramp Net: €5,306.72 / Gross: €6,315.00 Article number: VTM335401801.01 Technical data: • Brand: Vlemmix • Model: VTM • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 400 x 180 x 34 cm • External dimensions (LxWxH): 582 x 240 x 167 cm • Loading height of the floor: 35 cm • Perm. total weight: 3,500 kg • Unladen weight: 840 kg • Payload: 2,660 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable steel frame, welded • Water-resistant glued 18mm thick screen-printed floor • Aluminum diamond plate on the floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia coupling and parking brake • Reversing aid automatic • Aluminum diamond plate floor mounted on screen-printed floor • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket rack with lashing eyes • Stable steel side panels, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal frame for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated in the loading ramp (automatic support when the ramp is open) • 10 lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Clearance lights in the front • Automatic support wheel with holder in the center • 13-pin plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. Dwedpfx Aie Aicmre Esd - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Rear ramp - Low loading platform - Walkable fenders Net: €3,689.08 / Gross: €4,390.00 Article number: VTC235301500.01 Technical data: • Brand: Vlemmix • Model: VTC • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 300 x 150 x 34 cm • External dimensions (LxWxH): 469 x 210 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg • Unladen weight: 660 kg • Payload: 2,840 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable, welded steel frame • Water-resistant, glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm Dsdpfx Aio Aich Rj Ejwd • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia brake and parking brake • Reverse assist • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket rest with lashing eyes • Sturdy steel side walls, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal beam chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated in the loading ramp (automatic support when the ramp is open) • 8x lashing eyes on the side, with eyelets • Lighting recessed in the rear frame • Clearance lights at the front • Automatic support wheel with holder in the center • 13-pole plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) Dsdpfx Ao Ahpltei Ejwd - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_aluriffel Equipment: - Walkable fender - Ramp - Low loading platform Net: €3,941.18 / Gross: €4,690.00 Article number: VTA227301501.01 Technical data: • Brand: Vlemmix • Model: VTA • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 34 cm • External dimensions (LxWxH): 469 x 210 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,700 kg • Unladen weight: 570 kg • Payload: 2,130 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable steel frame, welded • Water-resistant, glued 18mm thick screen-printed floor • Aluminum diamond plate on the floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT overrun device and parking brake • Reverse drive automatic • Aluminum diamond plate floor mounted on a screen-printed floor • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket holder with lashing points Djdpfo Aicrpjx Ai Eewd • Sturdy steel side panels, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal frame for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated into the loading ramp (automatic support when the ramp is open) • 8x lashing points on the side, with ring eyes • Lighting recessed in the rear frame • Outline lights at the front • Automatic support wheel with holder in the center • 13-pin connector • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. Dwsdpfx Aeyrup Asi Ejd This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear Equipment: - Steel side panels - Ramp skids - Shovel rest Net price: €4,915.97 / Gross price: €5,850.00 Article number: VB3235301610.01 Technical data: • Brand: Variant • Model: 3516 B3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 162 x 23 cm • External dimensions (L x W x H): 482 x 208 x 150 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Unladen weight: 596 kg • Payload: 2,904 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, non-slip diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 21mm, non-slip and water-resistant • Extremely stable welded grid frame • Frame completely hot-dip galvanized • 2x individual ramps (skids) standing on axle, 130cm high • Stable eccentric locks • Support jacks on loading ramps • Very low chassis for low loading angle • Beavertail rear / low approach for work platforms and excavators • Excavator bucket rest at the front Dwsde Aicgaspfx Ai Eod • 8x lashing points mounted in the outer frame (1000dAN/kg) • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT overrun device and parking brake • Lockable coupling head • Spare wheel, mounted under excavator bucket rest • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Rear position lights with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Year of construction: 2008, condition: new, Type: XZF / QA90L4A Serial number: Output: 0.33 MPa / 1.5 kW Speed: / 1,390 rpm Diameter (top): Weight: 210 kg Dimensions: mm Djdpfx Asizz D Tsi Eewd Condition: unused

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_aluriffel Equipment: - Ramp - Low loading platform - Walkable mudguards Net: €5,134.45 / Gross: €6,110.00 Article number: VTL235401801.01 Technical data: • Brand: Vlemmix • Model: VTL • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 34 cm • External dimensions (L x W x H): 582 x 240 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg • Unladen weight: 800 kg • Payload: 2,700 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: No Dodo Aich Ujpfx Ai Ejwd DESCRIPTION • Continuous steel mudguards, walkable • Very stable steel frame, welded • Water-resistant glued 18mm thick screen-printed floor • Aluminum diamond plate on the floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia coupling and parking brake • Reverse automatic • Aluminum diamond plate floor mounted on screen-printed floor • Very low chassis for low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket rest with lashing eyes • Stable steel side walls, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal frame chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated in the loading ramp (automatic support when ramp is open) • 10 lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Boundary lights at the front • Automatic support wheel with holder in the middle • 13-pin plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: good (used), functionality: unexamined, Year of construction: 2000, Used impact crusher for the production of crushed rock and sand, feed size 20-100 mm, capacity approximately 40 cubic meters per hour, produces crushed rock and sand (approximately 50%), vibrating feeder at the crusher, 90 kW electric motor, steel substructure, discharge chute, V-belt guard. Wear parts are approximately 80% in good condition. Dwedszwt Uaopfx Ai Eod

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, Cold Jet i³ MicroClean – Compact Dry Ice Blasting Machine For sale: a used Cold Jet i³ MicroClean dry ice blasting machine, built in 2018 and with only 47 operating hours. The machine is fully functional and in very good condition. The i³ MicroClean is designed for precision dry ice cleaning. The optional DX pellet-shaving upgrade allows the machine to work with loose 3 mm pellets and dry ice nuggets. It can also be used with dry ice blocks. Machine details - Manufacturer: Cold Jet - Model: i³ MicroClean - Year of manufacture: 2018 - Operating hours: 47 - Condition: Used, fully functional - DX pellet-shaving upgrade: Available for €2,000 - Dry ice capacity with DX: approximately 4 kg - Variable feed rate: 0–0.23 kg/min, depending on pellet or nugget size and condition - Air consumption: approximately 0.85–1.4 m³/min at 5.5 bar, depending on nozzle - Included: 20 ft blast hose, applicator, and nozzle - Warranty: 1 year 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle Djdpfxjydpy To Ai Ejwd Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Cold Jet i³ MicroClean, Cold Jet i3 MicroClean, Cold Jet i³ MicroClean DX, Cold Jet MicroClean DX, Cold Jet dry ice blaster, dry ice blasting machine, dry ice blasting equipment, precision dry ice cleaning machine, compact dry ice blasting machine, dry ice pellet blaster, 3 mm dry ice pellet blaster, dry ice pellet-shaving machine, dry ice microparticle blasting machine, dry ice nugget blaster, industrial dry ice cleaning machine, low air consumption dry ice blaster, used Cold Jet machine, used dry ice blasting machine, dry ice cleaning equipment for sale.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis Dwodpfx Ais Ahqpgo Esd - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: new, functionality: fully functional, power: 560 kW (761.39 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. FULLSTAR 110 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing FULLSTAR-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-110 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: FULLSTAR-110 - Production Capacity: 200-300 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 1100x850mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 1st Chassis: 2200x5500 mm : 2nd Chassis: 1700x4500 mm(Grizzly) ¬- Screw Washer Size: 800x8000 mm (Twins Helix) - Total Motor Power: 560 Kw - Generator (optional): 700 kvA - Plant Dimensions: 1st Chassis: 22000 x 4700 x 4700mm Dwedozv Tamopfx Ai Eed : 2nd Chassis: 17500 x 4650 x 4600mm FULLSTAR-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We are selling a complete shrink-wrapping system from Reiner Diez Packaging Machines (Neuffen), manufactured in 2015, Made in Germany. The system was used in our facility for packaging tires. It is located in a hall and is fully functional and can be inspected on-site. In February 2025, the entire system underwent a comprehensive maintenance service by the manufacturer, Reiner Diez, for over €14,400. The invoice is available. Scope of supply: Film wrapping and sealing unit with separating sealing bar, belt conveyor, film unwinding at the bottom, two viewing window doors, and protective grating at the inlet Through-feed shrink tunnel Two control panels with emergency stop, compressed air maintenance unit Technical data of the wrapping/sealing unit Type: SB-D 11070 IL-SZ Machine No.: 141019 SZ Year of manufacture: 2015 Connection: 400 V / 3 Ph / 50 Hz Control voltage: 230 V AC / 24 V DC Rated current: 12 A Power consumption: 4 kW Fuse rating: 16 A Technical data of the shrink tunnel Dodpfxj Afx Nge Ai Eewd Type: HTC 950900 260-SZ Machine No.: 202046 Year of manufacture: 2015 Connection: 400 V / 3 Ph / 50 Hz Control voltage: 230 V AC Rated current: 100 A Power consumption: 59 kW Fuse rating: 100 A In addition, a compressed air connection is required. The sale is made excluding any warranty. Commercial sale; an invoice with VAT can be provided.

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, KÄRCHER IB 10/15 L2P Advanced Professional dry ice blasting machine Formerly an exhibition/demonstration unit, manufactured in 2024, only 2 operating hours according to the meter, like new condition, current list price €25,000, including narrow and wide blasting nozzles. The sale is for a used machine and excludes any return, warranty, or guarantee. Dsde Agwl Djpfx Ai Eewd - Net price: €11,680 // Gross price: €13,900 - Inspection is welcome! - Shipping costs €150 nationwide, excluding islands.

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not contain the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which is why it is reliable and not overly expensive to maintain. Dwedpfx Aeznnyxoi Eed For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold have a 1-year warranty. Repairs and maintenance of Cold Jet machines are available. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 837190, total width: 1,300 mm, total length: 2,110 mm, total height: 1,500 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, All-around labeling machine 152C Machine direction of operation: from right to left when viewed from the operator side - Aluminum frame + plate - Machine is mobile - Equipped with the HERMA 500 labeling machine - Printer integration possible after technical evaluation - Product diameter possible from 20-100 mm after technical evaluation - Roller separator diameter 100 mm - Belt conveyor length approx. 1,540 mm, width 100 mm with a conveyor belt that can handle accumulation Dwodpoz R Urmsfx Ai Eod - Lockable main switch with emergency stop function mounted on the top of the base frame Further information available upon request Additional demonstration machines are regularly available in our standard range. We would also be happy to invite you to our showroom to see the machines as part of a visit or live demonstration. Please bring your own products with you so that we can demonstrate the application in a practical way under your individual conditions.

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Ramp Equipment: - Spare wheel - Robust steel body - Highly customizable Net price: €7,092.44 / Gross price: €8,440.00 Article number: GP3235401702.01 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 170 x 30 cm • External dimensions (L x W x H): 569 x 230 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Tare weight: 847 kg • Payload: 2,653 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-round construction machinery trailer - unique on the market • Every available option can be flexibly added or removed, allowing for needs-based customization for almost any application • Attachment option on all 4 corners for side panels, tarpaulin frames, side panel extensions, or front wall extensions • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, other ramps, attachments, etc. can be retrofitted at any time • Robust steel fenders with non-slip perforated profile • Reinforced screen-printed plywood floor, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a low approach angle • Lashing points at the bottom and top of the side panel (1000 dAN/kg), TÜV certified • Side panels color: black Dsdpfx Aiezy Di Te Eswd • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock, ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, empty load weight: 949 kg, Year of construction: 2023, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Permissible total weight: 3,500 kg Unladen weight: 949 kg Payload: 2,551 kg Dedpfx Ais Afm Tvo Eswd MACHINE DETAILS Sideboard height: 200 mm Maximum permissible speed: 100 km/h (with appropriate approval) EQUIPMENT Double-acting hydraulic cylinder for tilting the loading platform Wooden floor instead of side rails All-round sideboards with tension rod locks Wheel shock absorbers for 100 km/h approval

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Dedpsz H Elmofx Ai Ejwd Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, This listing is for a Woodley Equipment Clinispin 642E Horizon Centrifuge Dwedpfxjxzh H Ss Ai Ejd

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated steel floor Equipment: -10 lashing eyes -Perforated steel floor -Shovel rack Net price: €5,689.08 / Gross price: €6,770.01 Article number: DPT235321700.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 686 kg • Payload: 2,814 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • robust steel fenders with non-slip perforated profile • reinforced perforated steel floor inside on the sides • screen-printed wood floor in the middle, 18mm, non-slip and waterproof • very stable steel frame, welded • frame completely hot-dip galvanized • chassis with two additional longitudinal supports under the loading area • perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • stable ACME locking system: closes silently, loading ramps are held in place by safety locking catches, rubber buffer dampens noise • very low chassis for a low approach angle • excavator shovel rack • 10 lashing eyes on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • maintenance-free axles and damping systems designed for long journeys and heavy loads • spare wheel easily accessible, mounted on the side panel • automatic reversing system • ALKO overrun device and parking brake • steel cast coupling head with integrated high-security lock ALKO • very stable V-drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty Dwodpfozy Dnpjx Ai Esd _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - 10x lashing points - Perforated sheet metal floor Dwsdszy Dvgepfx Ai Eod - Shovel rack Net price: €6,042.02 / Gross price: €7,190.00 Article number: DPT235321700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clip fasteners, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reversing automatic • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100km/h, ramp, aluminum floor Equipment: - Aluminum floor - 10x Tie-down points - Loading ramp - Loading angle 20° Net: €7,703.36 / Gross: €9,167.00 Article number: ILF335401791.12 Technical data: • Brand: Hapert Trailers • Model: Indigo LF-3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 405 x 179 x 19 cm • External dimensions (LxWxH): 589 x 238 x 145 cm • Loading height of the floor: 42 cm • Permissible total weight: 3,500 kg Dodpfxjzu N Nzs Ai Eewd • Tare weight: 1,101 kg • Payload: 2,399 kg • Chassis: Low-loader (wheels next to the superstructure) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • 3x Parabolic spring axle, each 1,800kg • Robust steel fenders, walkable • 4x HAPERT Safety Steps (anti-slip surface) • Grid floor running boards on the rear side, laterally • Aluminum profile floor • Very stable steel frame, welded • Frame completely hot-dip galvanized • 1x continuous loading ramp, 150cm long, mounted on a shaft, instead of a 120cm ramp • Length of ramp: 150cm • Loading angle: 13° • Stable eccentric locks • Corner posts with latches for the tailgate, removable without tools • Possibility of attaching to all 4 corners for tarpaulin frames, grid attachments, side board attachments or front wall extension • Robust support legs on the loading ramp • Lifting aid for the loading ramp • Very low chassis for low loading angle • Optional with bucket rest • 10x Tie-down point recessed in the side of the frame profile (1000dAN/kg), TÜV certified • Hole rail, three-sided 6cm (Combi Protect Rail), can also be used with locking bars and lashing straps - round holes 25mm, oblong holes 54x25mm • Parabolic spring axle from KNOTT • Reverse assist • KNOTT overrun device and parking brake • Very stable bolted V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any modifications! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -