Used Fume Extraction for sale (4,577)

Condition: excellent (used), Year of construction: 2009, Equipment: CE marking, Small mixing system for 3 gases with fluctuating withdrawal rates, mixture withdrawal possible from zero up to maximum capacity, independent of pressure fluctuations, rapid cycling withdrawal possible, lockable viewing panel for protection against accidental adjustment, splash-proof stainless steel housing. Technical data: Mixing range: Oxygen: (0-25% vol.) Carbon dioxide: (0-10% vol.) Argon: (0-100% vol.) Inlet pressure bar: min 6 bar - max 20 bar dynamic Outlet pressure bar: 3 bar Measuring pressure: 6 bar Gsdpszrfmdsfx Aihouh Volume flow: 0 - 173 NI/min Scope of supply: without container

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. Godpfxozq A Eze Aiheuh The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Gusdpfx Aezi Rkceihsh Mechanical cleaning of filter bags Return channel for cleaned air

Condition: used, Year of construction: 2015, CNC laser cutting machine, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting machine, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm at 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference No.: C2177 Gujdpfxozhtp Es Aiheh 121026ä

Condition: used, Technical specifications: Filter bag diameter: 6 x 600 mm Collection bag diameter: 6 x 600 mm Dust extraction port: 300/250 mm Power supply: 380 V Motor speed: 2800 rpm Motor power: 5.5 kW Gsdpfxszhuf Io Aihsuh Overall dimensions: Length: 4700 mm Width: 1100 mm Height: 1100 mm

Condition: used, 1 x DCE Dust Extractor Unit Guodez Ap Sropfx Aihsh

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Gedpfsyxm Ekox Aihjuh Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system

Condition: excellent (used), Good condition. Ready for work. Gujdpfx Aijy Af Rgjhsh

Condition: used, Year of construction: 2012, Schuko type Octopus 20 Godpfx Asy Agqhsihsuh Connection diameter: 200 mm Required air volume flow: 3,000 m³/h Required negative pressure: 1,100 Pa Table length: 3,280 mm Table width: 1,000 mm Table height adjustable from 700 to 1,000 mm Max. sound pressure level: 63 dB(A) Weight: 200 kg Year of manufacture: 2012

Condition: used, This listing is for 1 of 2 Horizon SPE-DEX 4790 Extractor SPE-DEX 4790 is the only extractor system ever designed to handle both clean and particulate laden environmental samples such as: Ground water Waste water Guedpfx Aexzhtlsihoh Drinking water Solid-waste water Process water (influent and effluent) Fresh and sea water The SPE-DEX 4790 Extraction System features: Bench-top operation freeing up valuable hood space Modularity for up to (8) extractors to be connected simultaneously to one PC Interchangeable 47 mm and 90 mm SPE disk holders Automatic sample bottle rinse (3)different solvents 5-Conditioning solvents Prewritten validated methods included Uses original sample bottle

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Gujdpsxh Ammsfx Aiheh Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Gusdpoxnlwzefx Aihsh Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Gedpfx Aiswwtz Nohsuh Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Optional equipment Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: Gedpfx Aiswwt Aajhsuh - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Gedpfx Aioxfkuyshouh Manufacturer: Dongguan Jieba Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Airflow : 1300 m3/h Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Guodpfow Ivrqox Aihjh Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Guodpfxsw Ivrwe Aihoh Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: used, Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger Gsdpfx Asw Ty Dnsihouh -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

Condition: excellent (used), Year of construction: 2018, Only a few running hours. The table must be connected to a external dust extractor. Gsdpfx Asw T Sicsihouh We ship all over EU.

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Guodsvrv Ezopfx Aihjh Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air Guodovrv E Ispfx Aihsh residual dust content H3 (

Condition: new, machine/vehicle number: D-CL-440-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 450 m³/h, noise level: 58 dB, total height: 1,430 mm, total length: 450 mm, total width: 550 mm, overall weight: 50 kg, Equipment: rotational speed infinitely variable, type plate available, ISI D-CLEANER Mechanical air filter device (dust) Type: 440 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for dust separation. TECHNICAL DESCRIPTION: Air volume: - 450 m³/h (free blowing) (depending on the filter configuration without collection elements) Air inlet opening: baffle plate as pre-separator Intake nozzle: 100 mm (on the left side) Filter configuration: - filter cartridge (dust class M according to DIN EN 60335-2-69 Appendix AA) - compressed air cleaning via rotary vane nozzle Color: RAL 7035 light gray (optional: special color) Guedpfsvrxc Aex Aihjh Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 450 mm / width 550 mm / height 1430 mm Weight: 50 kg

Year of construction: 2024, condition: new, functionality: fully functional, Professional mobile filter device for extracting welding fumes with a powerful extraction arm Suitable for welding processes MMA MIG MAG TIG plasma cutting Extraction capacity max 2500 m3/h Extraction arm length 3m Motor power 1.1 kW Connection voltage 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m2 Godpfxovnzwzj Aihjuh Powder-coated sheet steel housing with wheels and handles. Digital control panel with alarm log, operating hour counter and filter monitoring. The electronic circuit board is separate and protected from the air flow. High-performance fan located downstream of the filter in a separate soundproof compartment. Spark protection filter built into the device as original equipment. A set of activated carbon filters (10 kg) can be used on request, which are particularly required for SOV/VOC, stainless steel and galvanized steel.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, volume flow: 6,500 m³/h, intake manifold diameter: 300 mm, filter area: 120 m², noise level: 70 dB, total height: 2,400 mm, total length: 1,900 mm, total width: 990 mm, overall weight: 580 kg, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally mountable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and delivers high efficiency in particle separation. Main features: - Multiple filter cartridges in a horizontal design for a compact, maintenance-friendly construction. - Particularly suitable for industrial applications where consistent and reliable dust extraction is required. Your Benefits - High filtration efficiency & air quality: Thanks to multi-stage filtration, fine dust particles are effectively captured, contributing to clean air and prolonging the lifespan of your production equipment. - Compact design: The horizontal configuration saves space and facilitates integration into existing systems. - Low maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 7.5 kW blower ensures strong suction and stable extraction performance, even for demanding applications. Delivery ex works / from stock Guedpfexxvkmjx Aihjh Installation and commissioning (optional): Available on request, performed by our trained technical team. Spare parts (filter cartridges) and maintenance contracts are available separately to maximize your system’s uptime.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 990 mm, total length: 1,800 mm, input voltage: 400 V, overall weight: 450 kg, warranty duration: 12 months, space requirement height: 2,000 mm, space requirement width: 1,000 mm, space requirement length: 2,000 mm, power: 5.5 kW (7.48 HP), filter area: 120 m², intake manifold diameter: 300 mm, noise level: 70 dB, suction capacity: 6,000 m³/h, volume flow: 6,500 m³/h, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and offers high efficiency in particle separation. Key Features: - Multiple filter cartridges in a horizontal configuration for a compact and maintenance-friendly design. - Particularly suitable for industrial applications that require constant and reliable dust extraction. Your Benefits: - High Filtration Efficiency & Air Quality: Thanks to multi-stage filtration, fine dust particles are effectively retained, contributing to clean air and extending the service life of your production equipment. - Compact Design: The horizontal layout saves space and facilitates integration into existing systems. - Low Maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 5.5 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / from stock Installation and Commissioning (optional): Available upon request by our trained technical team. Gjdpfx Aexxvpioiheuh Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize your system’s uptime.