Used Galvanotechnik Leipzig for sale (689)

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW Dkedpfx Apju Nzwuswsr voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 1995, Technical details: Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz total power requirement: 0,77 kW weight of the machine ca.: 0,11 t dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm Dksdovc Axcepfx Apwsr The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. *

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Number of working hours: 2195 h machine weight approx.: 194 kg Dedpoxrdw Ijfx Apwokr dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. Dodpfxsyzzh Es Apwekr *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. Dsdpfx Apou Ibuwjwjkr The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm Dksdpfx Apsu Nfh Dewer clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Dksdpeu Id H Ajfx Apwer Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm Djdpfju Nxdfsx Apwskr compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: used, Year of construction: 2016, mast type: telescopic, fuel type: electric, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Djdezf Atnopfx Apwokr

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Dedpfx Aozf Appopwekr

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 1.134 kg Dodszf Anxjpfx Apwjkr Please contact Gebrauchtgeräte Center for more information

Condition: good (used), Cable reel rack, 5 bays with 3 unwinding levels each, height 3.35m – used - : Price ex-location: €1,500 (net)! Manufacturer: unknown Type: cable reel rack Year of manufacture: unknown Height: 3.35m Bay width: 90cm 5 bays, each with 3 unwinding levels Dkodow D Rwhepfx Apwor Condition: good Available: immediately Location: Leipzig (customer could also deliver the rack to branches in Bochum or Augsburg)

Condition: used, Year of construction: 2019, fuel type: electric, Lifting capacity: 450 kg Dodpjzfpdtsfx Apwekr Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Dsdezfpblspfx Apwjkr

Condition: used, Year of construction: 2015, fuel type: electric, Mast: articulated arm Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Dkodezfn Ahjpfx Apwor

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 227 kg Dsdpozfnymsfx Apwokr Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 1999, Please contact Gebrauchtgeräte Center for more information Dsdpfxszfmp Hj Apwokr

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Djdpfx Aozfl Iujpwokr

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Dkjdpfozfln Ijx Apwer

Condition: used, Year of construction: 2015, mast type: telescopic, fuel type: diesel, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Dkodpfx Ajzfk U Tepwjr

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 227 kg Dedpjzfkvwjfx Apwokr Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 565 kg Dkjdpfx Apszfklxewer Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 544 kg Dedpfx Apezfkkbswskr Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Dkedpszfkdzefx Apwor

Condition: used, Year of construction: 2017, fuel type: electric, Lifting capacity: 227 kg Dkodpfszfkcqsx Apwjr Please contact Gebrauchtgeräte Center for more information