Used Gastronomy Resolution for sale (1,101)

Condition: used, This listing is for 1 of 3 Sartorius Practum513-1S Laboratory Balances The unit is in full working condition and is ready for immediate release. The Practum series is described by Sartorius as offering “best value for your money, without compromises in precision and reliability.” The model 513‑1S is one of the higher‑capacity versions of the Practum range: a capacity of 510 g, with a readability (resolution) of 0.001 g (i.e., ±1 mg) for that capacity. It uses the typical features of the Practum line: rugged housing (aluminium die‑cast base and ABS housing) and technology built for standard applications. Connectivity: has a Mini‑USB interface for outputting data to a PC or compatible printer. Weigh‑below hook capability (for e.g., hanging weights beneath the balance) is supported. A front level bubble and adjustable feet support easy leveling, which improves accuracy and repeatability. Mechanical overload protection is built in to help ensure durability. The Practum 513‑1S is well‑suited for standard analytical/precision weighing tasks in laboratories where you need to weigh up to ~ 510 g with 1 mg resolution. Csdpsxrt Ntofx Aaqehd Typical use‑cases: formulation work, general sample weighing, quality control, density determination, routine laboratory tasks. The documentation mentions modes like counting, percent weighing, averaging and “unstable conditions” for the broader series. Because of its resolution and capacity, it's a good fit when you don’t need ultra‑fine microgram resolution but need relatively high capacity with milligram resolution.

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - SK50 tool taper - Through hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input increment 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct position measurement with resolution 0.0001 mm Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Workpiece weight max. 2.5 kg Chain magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Workpiece weight max. 1.5 kg Stack magazine: - Suitable for stack magazine for indexable inserts CCD area camera measuring system: - Tool indexing and positioning by cooling channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Touching off workpiece length / tool tip - Scanning flute lead angle - Positioning in a coolant hole at the tool tip Electrical connection: - 63A pre-fuse - Supply voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft and Bauer extinguishing system Cedpfxjwpqkre Aaqohd - Extraction: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Workpiece retainer ----- Operating procedure for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feeding by automatic handling system - Workpiece clamping by automatic collet chuck - Positioning of workpieces in the working area - Workpiece machining - Automatic return of the workpieces on a driven discharge conveyor Operating procedure for solid carbide indexable inserts: - Manual loading of the stack magazine in the working area - Workpiece feeding by automatic handling system - Automatic clamping using special clamping device - Positioning of workpieces in the working area - Workpiece machining - Automatic return of finished workpieces to the storage system Drill grinding: - Grinding flute profile - Grinding point - Grinding outer contour - Grinding relief - Grinding circumferential margin - Cylindrical grinding Indexable insert grinding: - Grinding seating surface and pin ----- There are two additional identical machines for sale!

Condition: excellent (used), Year of construction: 2015, Durst P10-250 Corrugated / Sign Chedpfxjw Uz Nnj Aaqod under full Durst Germany service Year: end of 2014 (production in 2015) Colors: 6c, 10 pl - 1000 dpi resolution Speed up to 240 m2/h Print width: 250 cm 2-4 tables Options: - Automatic registration table for multi-loading boards - Caldera RIP software

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min Csdpfsfmu E Aox Aaqjhd quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Chsdpfx Aovvi N Ijaqed

Condition: new, neu ca. 6 Monate ab Auftragse 146260 € 2764.31 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Chedpfxswiqq Ee Aaqod Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTIONS: Fully enclosed splash guard € 15.950,00

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, tank capacity: 410 l, Equipment: documentation/manual, ★ TOP maintained machine from the dissolution of a renowned toolmaker – be sure to check out our other listings as well ★ Automated sinker EDM cell consisting of: ● Sinker EDM machine GF Agie Charmilles Form 350 P Year of manufacture: 2023 Chjdpoxgvgkefx Aaqsd Serial number: 592.200.00.0338 ● Pallet and electrode changer System 3R Workpartner 1+ LH Year of manufacture: 2023 Serial number: 2312-V00-830 ● Condition: Very good ● Delivery terms: Free loaded onto truck (FCA), unpacked ● Location: 73347 Mühlhausen ● Availability: Early December 2025 – The items must be collected by the buyer during calendar week 49/2025 as scheduled. The exact date will be set by us. Earlier availability may be possible upon agreement. ● Payment terms: Advance payment by bank transfer ● Internal ref. no.: JO1 ● Under power for inspection: YES – by arrangement Technical data: ● Control: AC FORM HMI ● Travel X / Y / Z: 350 / 250 / 300 mm ● Max. axis speeds X / Y / Z: 6 / 6 / 15 m/min ● Minimum resolution X / Y / Z: 0.01 μm ● Linear glass scales ● Operating hours: Machine on = 15,132 hours, machining time = only 694 hours! ● Max. electrode weight on ram: 50 kg ● Integrated C-axis ● Table dimensions: 500 x 400 mm ● Max. workpiece dimensions: 700 x 460 x 275 mm ● Max. workpiece weight: 500 kg ● Fire extinguishing system ● Rated connected load: 9.6 kVA ● Power: 13.8 A ● Voltage: 400 V ● Dielectric fluid capacity: 410 L ● Max. working current: 80 A ● Connection for exhaust gas extraction ● Pallet and electrode changer System 3R Workpartner 1+ LH with 9 pallet slots & 89 electrode slots ● As the machine is connected to a central cooling system, the buyer may require a separate chiller unit ● More technical data on request Scope of delivery: ● Manuals ● Extensive / high-quality accessories and spare parts as per photos Dimensions & weight: ● Installation dimensions L x W x H approx.: 4000 x 2200 x 2600 mm ● Weight approx.: 4000 kg ⚠️Check out our other listings as well⚠️ Additional notes: ►We expressly recommend collection by direct shipment (freight forwarder) ►The goods are sold without any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale only to business customers❗

Condition: excellent (used), Year of construction: 1997, center height: 160 mm, Cylindrical grinder Paragon - GU-2035P MACH-ID 9191 Make: Paragon Type: GU-2035P Year: 1997 X Axis resolution 0,001 Chsdpfx Aew Rcbdoaqsd X Axis rapid 6000 mm/Min Z Axis resolution 0,001 Z Axis rapid 4000 mm/Min 2 Axis Mitutoyo dro Centre height: 160mm Grinding Ø: 320mm Grinding length: 500mm Grinding stone dimensions:405 x 56 x 127mm Grinding stone speeds: 5 - 750Rpm Tailstock: 4Mk Coolant system: Yes Filtration: Yes Length: 2800mm Width: 2100mm Height: 1900mm Weight: 2800kg

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Chjdpfxoxr Uzwj Aaqod Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg

Condition: excellent (used), Product advantage: Product name: Outer diameter micrometer Chsdpfoqgc R Rex Aaqsd Specification: 25-50mm Resolution: 0.001mm Metric conversion Product process: surface spray Scaling process: laser scaling Multifunction dual-use type: digital display plus scale

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Csdpevvi Scjfx Aaqehd

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: E21SJ2307......., The iCombiPro is the latest combi steamer from RATIONAL. The iCombiPro 20.1/1 Gas model, featuring 20 GN 1/1 rack positions, is designed for easy operation by untrained personnel, enabling outstanding food quality without the need for constant supervision. The unit has been inspected in our in-house specialist workshop and is fully functional. The ultra-fast intermediate and self-cleaning functions keep your unit spotless. You will receive an invoice with VAT shown separately. Condition: Used, tested, and fully functional Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door clearance for transport (WxH): 900 x 1900 mm Serial number: G21SJ2307..... Year of manufacture: 2023 Max. loading per rack: 5 kg Max. total loading: 100 kg Weight (gas unit): 273 kg Electrical connection: Voltage: 1 NAC 230 V Gas connection value: 42 kW Fuse protection: 16 A Water connections: Water inlet (pressure hose): 3/4" inch Water outlet: DN 50 Additional information: Temperature range: 30°C to 300°C Senses current cooking chamber conditions Detects size, loading quantity, and product status to determine browning Learns frequently used cooking routines and implements them Determines the ideal cooking path for your desired results MyDisplay – customisable, user-specific control panel TFT color display with touchscreen Application and operating manual accessible via the device display Core temperature probe with automatic error correction and positioning aid Insulated, glazed door compartment for energy efficiency LED interior lighting Energy consumption display included Chodpexnzvmjfx Aaqed Humidity regulation: percentage-precise humidity measurement and control Individual programming of at least 350 cooking programs with up to 12 steps each Manual steaming adjustment in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable fan speeds Integrated, maintenance-free grease separation system without an additional grease filter Cool-down function: rapid chamber cooling Automatic adaptation to installation location (altitude, climate, etc.) Oven door with vented triple-glazed panel and swiveling inner pane Wastewater fixed connection permissible according to SVGW Splash and jet water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with date and time settings Interior and exterior made from stainless steel DIN 1.4301 WiFi module integrated Service: We are happy to refer you to a certified Rational customer service partner throughout Germany. Looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new products. We are happy to advise you on all types of units, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our equipment service for you: - 6 months warranty on all electrical parts - High-quality brand equipment at fair prices - Professional and competent advice – before and after purchase - Flexible shipping or self-collection options - Provision of operation manuals, connection diagrams & spare parts - Complete accessory program at attractive prices

Condition: used, Year of construction: 2016, functionality: fully functional, The Kornit Allegro is a state-of-the-art, industrial roll-to-roll digital printing machine designed for fully automated pigment printing on textiles—without the need for pre-treatment or post-curing. It delivers excellent print quality, high production speeds, and maximum flexibility in fabric selection. This machine is ideal for textile printers and manufacturing operations focused on sustainable, water-based pigment inks. Codsxtf U Depfx Aaqjhd The machine has been serviced regularly, is in excellent, immediately operational condition, and is still in daily use—viewing and test prints can be arranged at any time by appointment. Serial number: 70-MACH-8282 Applications Primarily used for printing on cotton fabrics such as: - Jersey - French Terry/Summer Sweat - Cotton Woven Fabrics - Canvas Sale due to downsizing/machine replacement. Included in the Scope of Delivery: Complete, fully equipped production line: - Kornit Allegro printing system - Kornit dryer - Unwinder & Rewinder - Compressed air compressor Various spare parts, inks, and longstanding contacts to fabric suppliers perfectly suited to the Allegro are included. Technical Specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Gray) - Pre-treatment: integrated 8th channel - Printheads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz Highlights ✅ Complete, ready-to-produce system ✅ No pre- or post-treatment required ✅ Wide material compatibility: natural fibers, blends ✅ Eco-friendly, GOTS & OEKO-TEX-compliant pigment inks ✅ Ideal for on-demand or sample production The machine is being offered at a low price as we are under some time pressure and need the space. The machine has been running daily and reliably for years! Some printheads may need replacing soon and the belt requires new adhesive (adhesive is supplied). The machine must be dismantled and collected in Hamburg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Tube bending software Chedpoxuii Ujfx Aaqed Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 10100074, Year of construction: 2023, operating hours: 20 h, 💡 Unique Opportunity – Ex-Dealer Showroom Machine This machine comes from the demo showroom of a former official Markforged and DWS dealer, who was active on the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has extremely low operating hours. Now available through 3D Machineries Srl, this is a rare chance to purchase an industrial 3D printer in practically new condition at a fraction of its original cost – ready for immediate delivery with complete transparency regarding its origin and usage history. -----LISTING DESCRIPTION----- DWS – XPRO SL – 3D Stereolithography (SL) Printer 📍 REF: 10100074 – SN: C362922 – Year: 2023 🆕 DEMO UNIT – USED ONLY FOR CLIENT TESTS DWS Digital Wax XPRO SL professional 3D printer, designed for high-precision applications with SLA (Laser Stereolithography) technology. This machine is as good as new, manufactured in 2023, and was used solely for brief demonstration testing at the official DWS showroom. It is perfect for companies seeking a professional plug-and-play system at a significantly lower cost than new equipment. ✅ Key technical data: Model: DIGITAL WAX XPRO SL REF: 10100074 SN (Serial Number): C362922 Year of manufacture: 2023 Chjdpswzmhwjfx Aaqjd Origin: DWS showroom display Condition: Excellent – minimal use (only for testing) Technology: SLA (Laser Stereolithography) Manufacturer: DWS Srl – Thiene (VI), Italy Made in Italy ⚙️ Technical features (generic for XPRO SL model): Ideal for: aesthetic and functional prototypes, high-precision components Ultra-high resolution: for fine details and industrial-grade surface finishing Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Proprietary software included Intuitive controls and user interface Connections: USB / Ethernet ✅ Perfect for industrial design, jewellery, dental labs, biomedical/medical, precision mechanics 💡 Unique opportunity: 2023 machine, virtually new, at a significantly reduced price compared to the official list. 📩 Contact us for further details, additional photos, the official DWS price list, or to arrange a viewing of the machine.

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Chodpevvll Sefx Aaqod Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm Chjdpfjxn Amtjx Aaqed work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: reconditioned (used), Electrolux Variomix 150l with mixing arm. VOlume 150l. COoling option. Unit after renovations ready to work . 31,5kW 380V Chedpfxoxtxc Is Aaqod

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, very good condition, fully functional. Non-smoking environment, no damage. Chodpfjxtbpdox Aaqjd ✅ Technical Details: Magnification: 0.1× to 5,000× (currently equipped up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8-inch CMOS Frame rate: up to 50 fps Depth of field: High depth of field even in live view Measurement functions: 2D and 3D measurements (angle, area, volume, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg [gebrauchtm...schinen.de], [keyence.de], [forbiomit....rostock.de] ✅ Features: Fully automated image capture and measurement Multi-angle observation without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g. VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection in Porta Westfalica by arrangement

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Technical details Print type Inline inkjet system Ink type Oil-based pigment ink (cyan, magenta, yellow, black, gray) Print resolution Standard/full color black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 300 dpi (secondary scan direction) Fine Black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 600 dpi (secondary scan direction) Number of gray levels Black: four (4) gray levels Cyan, magenta, yellow, gray: 12 shades of gray Data resolution standard/full color Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 300 dpi Fine Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 600 dpi Line smoothing 600 dpi × 600 dpi Warm-up time Max. 2 min. 30 sec. (at a room temperature of 23 °C) Print time to 1st page*1 Max. 5 sec. (A4 portrait feeder) Copy time to 1st page*1 Max. 7 sec. (A4 portrait feeder) Print speed *2 *3 A4 portrait feeder Simplex: 165 pages per minute Simplex: 80 sheets/minute (165 pages per minute) Letter portrait feeder simplex: 165 pages per minute simplex: 80 sheets/minute (165 pages per minute) A4 landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) Letter landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) B4 (JIS) Landscape feeder Simplex: 102 pages per minute Duplex: 44 sheets/minute (88 pages per minute) Legal landscape feed simplex: 104 pages per minute duplex: 44 sheets/minute (88 pages per minute) A3 landscape feeder simplex: 88 pages per minute duplex: 42 sheets/minute (84 pages per minute) Ledger landscape feeder Simplex: 86 pages per minute Duplex: 42 sheets/minute (84 pages per minute) Paper size: Standard tray Max: 340 mm × 550 mm Min.: 90 mm × 148 mm Paper cassette Max.: 297 mm × 432 mm Min.: 182 mm × 182 mm Print area 314 mm × 548 mm Chjderrxn Sopfx Aaqjd Guaranteed print area * 4 Standard: margin width 3 mm Max. margin width 1 mm Paper weight Standard tray 46 g/m2 up to 210 g/m2 Paper cassette 52 g/m2 up to 104 g/m2 Paper feed capacity Standard tray stack height up to 110 mm Paper cassette stack height up to 56 mm (x 3 cassettes) Output table capacity Stacking height up to 60 mm Network interface Ethernet 1000BASE-T/100BASE-TX/10BASE-T (2 channel) Storage capacity 4 GB Hard disk *6 Capacity 500 GB Available storage space Approx. 430 GB Operating system Linux Power supply 100 to 240 V, alternating current, 12.0 to 6.0 A, 50 to 60 Hz Power consumption Max. 1200 W

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, 💡 Unique Opportunity – Official Dealer Showroom Machine This machine comes from the demonstrative showroom of a former official Markforged and DWS dealer active on the Italian market until 2025. It has been used exclusively for demonstration purposes, maintained in excellent condition, and with very low operating hours. Now available through 3D Machineries Srl, this is a rare opportunity to acquire an industrial 3D printer that is practically new, at a fraction of its original cost – with immediate availability and maximum transparency regarding its origin and usage. Cedjwzmd Eopfx Aaqohd -----LISTING DESCRIPTION----- Markforged X7 – 3D Printer for Composite Materials (CFR) – Used for Demos For sale: Markforged X7, top-of-the-line industrial 3D printer featuring Continuous Fiber Reinforcement (CFR) technology, specifically designed for manufacturing high-performance functional parts. The machine was installed on 01/02/2024 and has only 2,262 operating hours, exclusively in showroom use for demo purposes. It comes from an official Markforged dealer currently in liquidation. ✅ Condition: Excellent – demo use only ✅ Installation date: 01/02/2024 ✅ Print hours: 2,262 ✅ Serial number: 21450012211002129 ✅ Origin: Official dealer showroom ✅ Continuous fiber reinforcement: carbon fiber, fiberglass, Kevlar® ✅ Included software: Eiger (cloud and local) ✅ Dry Box for safe material storage included Technical Specifications: Technology: FFF + CFR (Continuous Fiber Reinforcement) Build volume: 330 x 270 x 200 mm Enclosed chamber for improved thermal stability Layer height: from 50 µm Accuracy: ±150 μm (X,Y) High-resolution optical encoders Connectivity: Ethernet, WiFi, USB Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon Fiber, Fiberglass, Kevlar®, HSHT Certifications: CE, FCC, UL, UKCA Ready for Blacksmith (automatic dimensional calibration) ✅ Perfect for aerospace, automotive, industrial manufacturing, advanced prototyping, defense 💡 Unique chance to acquire a professional CFR 3D printer at a competitive price! 📩 Contact us to receive the technical data sheet, video, full documentation, or to schedule a viewing of the machine.

Condition: used, Year of construction: 2025, operating hours: 290 h, functionality: fully functional, number of ink cartridges: 5, color channels: CMY+2W, resolution (max.): 1,200 dpi, paper weight (max.): 4,500 g/m², paper width (max.): 1,600 mm, paper height (max.): 40 mm, number of feeding trays: 1, total length: 3,480 mm, total width: 1,630 mm, total height: 2,410 mm, year of last overhaul: 2024, type of input current: AC, input current: 30 A, input voltage: 220 V, Equipment: documentation/manual, EFI 16H Pro UV LED Hybrid Printer – Premium 1.6m Industrial System Professional Grade Large Format Printer | Competitive Pricing | Immediate Availability Model EFI 16H Pro UV LED Hybrid Print Width 1.6 meters (16H designation) Color Configuration CMYK + 2 White Resolution 1200 x 1200 dpi (professional quality) Print Speed Up to 91 m²/hour Ink Technology UV LED curable pigment ink Printing Modes 4-pass (outdoor durability), 6-pass (POS applications) Installation Date July 2021 Installed Age 4 years (meticulously maintained) Total Output 5,500 m² (tracked via ERM system) Included Equipment & Accessories EFI Control Software Suite – Latest drivers and management tools Machine Controller – Integrated system for scheduling and color management Flatbed Tables – Two precision flatbed work surfaces for rigid media Roll-to-Roll System – Motorized unwinder and motorized rewinder for continuous roll media Complete Documentation – Manuals, maintenance logs, technical support information Condition & Maintenance History Overall Condition: 90% – Excellent working order Chjdexup Tgopfx Aaqsd Printhead Status: One Cyan printhead requires cleaning (routine maintenance) Mechanical: All systems operational and well-maintained Cosmetic: Professional appearance, consistent with industrial facility use Can assist with transport preparation and truck loading for a small fee

Condition: good (used), Tornos ENC 74 T CNC automatic lathe TECHNICAL DATA Codpfx Asvdwcfjaqshd Movable headstock Maximum round bar passage: 7 mm Minimum round bar passage: 1 mm Square bar capacity: 5 mm Hexagonal bar capacity: 6 mm Maximum turning length of fixed guide bush (7 mm): 113 mm Maximum turning length of fixed guide bush (10 mm): 109 mm Turning length of synchronously rotating guide bush (10 mm): 81 mm Turning length of synchronously rotating guide bush with 3 positions: 72 mm Maximum turning length of MAGIC guide bush (7 mm): 104 mm Maximum turning length of Habegger guide bush (10 mm): 103 / 94 mm Collet chuck Schaublin type F13: 76-357 Minimum and maximum clamping force: 270 and 590 daN Main spindle speed: 15`000 rpm Fast feed (headstock): 15 m/min Resolution of the measurement (Z1): 0.00025 mm Guide bush holder Number of tools: 7 Maximum number of cross drilling attachments and cross milling cutters: 3 Maximum speed: 6000 rpm Square layout of the tools: 8 x 8 mm Rapid feed of the tools (X1/Y): 7.5 / 10 m/min End attachment Movement speed X2: 15 m/min Movement speed Z2: 15 m/min Number of positions for end units: 3 Center distance between units: 50 mm Counter headstock maximum clamping diameter: 7 mm Collet chuck Schaublin type F13: 76-357 Maximum counter-spindle headstock speed: 12`000 rpm Speed of the rotating units: 12`000 rpm Counter operations Number of positions: 3 Diameter of bores for tool carriers: 35 mm Center distance between positions: 50 mm SCOPE OF OFFER Including: (list not exhaustive) Tornos ENC 74 T CNC automatic lathe Control: GE Fanuc Series O-TT Fire extinguishing system: Siemens Chip conveyor Coolant tank / pump High pressure pump Bar feeder: LNS Exact scope of supply according to photo gallery No liability is assumed for the correctness, completeness and up-to-dateness of the information

Year of construction: 2017, condition: excellent (used), functionality: fully functional, RayTRX R42 – Professional 3D light-field camera with 42 Megaray sensor performance and up to 10 MP effective resolution. Condition: Used, fully functional, well maintained. Optionally available with accessories (power supply, mounting bracket, software license on request). Technical Highlights: Chsdpsxtbh Tofx Aaqod - Sensor: 42 Megarays, CMOS, BSI - Resolution: up to 10 MP effective - Frame rate: 7 FPS at full resolution - Interfaces: USB 3.0, GigE, PCIe - Weight: approx. 71 g - Dimensions: 39 × 39 × 28 mm - Applications: Machine vision, microscopy, research, VR/AR, quality assurance - Software: Raytrix SDK/API, compatible with Windows 10/11, CUDA, OpenGL Special Features: - Post-capture focus adjustment - Extended depth of field via patented microlens array - Compatible with NVIDIA RTX GPUs - Winner of the Red Dot Design Award [red-dot.org] Pickup in Porta Westfalica by prior arrangement. Contact: Sascha Biskup SCM, Porta Westfalica

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Chodpfx Aowg Takoaqjd Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.