Used Gear Planer for sale (9,129)

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment Fgodpfx Amjv Hqn To Eei electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW Fgsdpfx Aox U U Ekem Eoi - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Fsdpjzwk D Sjfx Am Eegi Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Fgedpfj Aa Inksx Am Esi Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: good (used), Manufacturer: Siemens Type: DF39-LA71MG4I-L4N Motor number: FDU1601/2294757 002 Power: 0.25 kW Speed: n1 1,350 rpm / 1,650 rpm Speed n2: 16.3 rpm / 20.0 rpm Shaft diameter: 25 mm Shaft length: 50 mm Mounting flange diameter: 120 mm Bolt circle diameter for mounting screws: 100 mm Weight: 13 kg Fgsdshgbtrepfx Am Eoi Dimensions: 550 x 220 x 170 mm Multiple motors available.

Condition: excellent (used), Catalog number 7739 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - noise-reducing comb - cutterhead guard - adjustable angle guide - table length 2060mm - both tables adjustable THICKNESS PLANER: - max. thickness of workpiece in thickness planer 240mm - thickness planer cutterhead guard *from top: - pawls - infeed roller, toothed, with twist - pressure rollers - planing roller - pressure roller - outfeed roller, smooth - 2 adjustable rollers in the lower table - main motor 5.5kW - electric brake Fgjdpfx Ajzx R Tcem Eoi - electric table height adjustment (up/down) - dust extraction port diameter 120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES – Made in Italy – Noise-reducing comb – Unpainted – Excellent condition – Used planer-thicknesser Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Fgodoz E H Dbspfx Am Eji Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer, manufactured in 2022, in like-new condition. The machine has been used for a maximum of 50 hours. Therefore, it is in very good condition! Fedpfxez S Ulze Am Eogi Working width: 63 cm Electric table adjustment Includes new Tersa replacement blades. Optionally, a matching Fimal PF530N jointer, manufactured in 2022, can also be purchased. See the last pictures. - Thickness planer Fimal S63A (individual price: €7,500) - Jointer Fimal PF530N (individual price: €6,500) Total price for both machines together: €12,500 Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for defects. No guarantee, warranty or right of return.

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR Fjdpfsztpmqex Am Eegi (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Fjdpfxoz Et E Ee Am Eegi Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: excellent (used), functionality: fully functional, Hydraulic feeder type 814 300 Fsde Ahimaepfx Am Ejgi 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: excellent (used), Catalog number 7640 Fodpezx Suuofx Am Eogi ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, machine/vehicle number: 10314, The system, retrofitted by Comur in 2001, is still operational and has the following technical features: • CE certification • Speed control of the hammering action via inverter • External cooling tank • Magnetic chip conveyor • Hydraulic unit and workpiece clamping cylinder • Completely renovated electrical system Fgodpfx Amj Ahraxo Esi

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height Fjdpfoztm Huex Am Eogi 6 spindles 2 lower 2 upper Left Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Central lubrication Plate lubrication First owner 2008 model year

Condition: like new (used), feed rate X-axis: 3 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 6 m/min, total length: 7,000 mm, total height: 4,000 mm, total width: 7,000 mm, input frequency: 50 Hz, overall weight: 27,000 kg, Nominal workpiece diameter Ø 1.200 mm Max. Radial travel (X-axis) 770 mm Fgsdpfj Agbdfjx Am Eoi Max. Tangential travel (Y-axis) 300 mm Max. Axial travel (Z-axis) 700 mm Lowest grinding wheel position above table 470 mm Max. Profile depth 80 mm Grinding spindle swivel angle (A-axis) +/- 45° Workpiece table Outer diameter 800 mm Bore diameter x depth Ø 300 x 900 mm T-slots 6 x size 22H12 pitch 30° Max. permissible load 10.000 kg Max. Table speed 5 1/min Hydrostatic radial bearing Axial plain bearing • Dialog software for the automatic generation of part programs for profile grinding of external gears • Basic machine P1200G with Siemens Sinumerik 840C control system • All axes and spindles in SIMODRIVE 611 D digital drive technology. • Centering device with 3D measuring probe (external) Optional - Head for Internal Gear Cutting

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Fgjdpfx Aez Snh Dsm Eji Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Fedpfx Amsz Snbcs Ejgi Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Fgsdpfx Ao Aidufom Esi Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 140mm - number of spindles 4 1) horizontal lower 200mm, 5.5kW 2) vertical right 140mm, 4kW 3) vertical left 140mm, 4kW 4) horizontal upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm – top: - 6 infeed rollers, toothed, including 2 double rollers - outfeed roller, toothed, double, rubber – bottom: - side pressure roller - infeed roller, toothed, helical, in the lower table - side pressure roller - outfeed roller, smooth, metal - all rollers pneumatically pressed - length of the infeed table 1600mm - table adjustable up/down - central lubrication Fsdpezx Sn Ujfx Am Esgi - electric setting of the planing thickness - lifting motor 1.1kW - stepless feed rate adjustment - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x140mm - dimensions L/W/H 3200x1700x1750mm - weight 3000kg ADVANTAGES – for 4 heads – ideal for both wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings Fgsdpfx Asztalqjm Esi - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Technical specifications: Fodpfx As Ahx Txjm Eegi Max. planing width: 600 mm Max. planing height: 250 mm Cutterhead diameter: 140 mm Number of knives: 3 Number of rollers in the table: 2 Feed speed: 2 speeds Manual lifting Dust extraction port: 200 mm Power supply: 380 V Motor power: 5 kW Overall dimensions: Length: 1360 mm Width: 1100 mm Height: 1200 mm

Condition: used, machine/vehicle number: 43355, functionality: fully functional, planing width: 510 mm, actuation type: electric, overall weight: 950 kg, BÄUERLE – 510 mm surface planer, in working order, cast iron construction. For sale is a robust, heavy-duty surface planer from the German manufacturer BÄUERLE, with a working width of 510 mm. The machine features a massive cast iron construction, long work tables, and an adjustable fence. It is a classic industrial machine designed for professional woodworking. Technical condition: The machine is in good working order. It was recently in use in an active woodworking shop. Solid cast iron construction. Metal work tables. Adjustable fence. Fsdjz Uyzaspfx Am Esgi The original BÄUERLE manufacturer's marking is preserved. Technical data: Manufacturer: BÄUERLE, Germany. Type of machine: surface planer / joiner. Working width: 510 mm. Number on the preserved nameplate: 4335. Year of manufacture: unknown. Condition: used, in working order. The machine is being sold due to no longer being needed. I am looking for a new owner who will appreciate its solid construction and continue to use it in a workshop or woodworking shop. Viewing and testing are possible on-site after prior arrangement. Location: Poland, near Szczecin. Collection and transport are the responsibility of the buyer. Loading can be arranged. Price: €2,860 (negotiable). Please contact me primarily in writing via the Machineseeker form. Thank you for your understanding.

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting Fgedpfx Amozxhdfo Esi - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: good (used), Year of construction: 2020, Gearmotor - Nord Drivesystems - 0.75 kW Fgedpfoz Sk Rhsx Am Esi - 4 RPM - Type SK 9043.1VF-80LP/4 - Year 2020 - Weight 160 kg - Price stated is per unit.

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Fsdpfx Aoz Snggjm Esgi Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) The scope of supply includes exactly what is shown in the pictures.