Used Gillardon for sale (29)

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Lrodpfxsxpxbce Agzeu

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm . Ljdpfx Aoxpqwcjgzjru

Condition: good (used), Machine 1 pictures 1-5 Alzmetall AB 40 SV Price 9500,-€ drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2,4KW Machine weight approx. 500kg Machine 2 pictures 6-12 Weipert SBM 49 Price 4.250,-€ drilling capacity 40mm table 560x560mm quill stroke 180mm Spindle MK 4 Speed 50-1450 rpm Steps 12 Feed rate 0.1-0.2 H8Vxu2W Spindle table 770mm throat 350 mm Motor 1.5 KW Thread cutting device pictures 13-16 Gillardon GB 40 VE Price 3.690,-€ Year of construction: ca.1988 L x W x H: approx.630x985x2020mm Weight: approx. 620kg Lodpfx Agju Nm Tbszeru Drilling capacity ( steel ): approx.40mm Drilling capacity ( cast iron ): approx.50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, stepless: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1;0.16;0.25 mm/rev

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, 1 pc. Gillardon column drilling machine, drill press in good used condition. Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden According to the information on the attached nameplate, the drill press is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor: Three-phase asynchronous motor, type KPER 80 K 4, VEM motors Thurm GmbH D Zwickau 3 speed ranges via belt drive. Quill stroke approx. 120 mm, drilling spindle with Morse taper 2 Weight approx. 150 kg / approx. 1380 RPM, MK2 drill column Power consumption 0.75 kW – mains connection 380 Volt, 50 Hz. Price on request / special price All technical data subject to typographical errors/mistakes. Ledpfxjh N Svlo Agzeru Sale exclusively within EU countries.

Condition: used, Year of construction: 1998, Revolutions: 60 - 1400 rpm Lrodpfx Agjw Evvlozeu Location: Nattheim

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Lrsdpfx Asxn T Syogzsu Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: ready for operation (used), An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible. Lsdpfxoxnp Sve Agzjru

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t Lredsxgq Ipjpfx Agzju (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm)

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Ledpfju Nm Niox Agzjru Motor 2.9 KW

Condition: good (used), Gillardon GSB 20 pillar drilling machine Drilling capacity in steel (diameter) 20 mm Lrsdem Sg S Njpfx Agzju throat 260 mm Drilling stroke 115 mm

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 3 MK table-size 500 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1400 U/min total power requirement 1,8 KW weight of the machine ca. 0,6 t dimensions 1,2 x 0,8 x 2,1 m Pillar drill with: - Feed - Thread cutting device - Variable spindle speed Lodpfxew In Dlj Agzsru - Coolant pump

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Ledpfxov Du Rao Agzoru Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm Lrsdpfx Aot Hr Svogzju - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Condition: good (used), Pillar drilling machine GILLARDON GB 30 V - Drilling capacity / steel 35mm - Spindle holder MK 3 - Drilling stroke 175mm - Reach 290mm - Speeds steplessly adjustable - Speed display - Drilling depth stop Lrodpfjwn Hnqex Agzeu - Automatic feeds - Table height adjustable by hand crank - Drive 1.8 KW Dimensions: LxWxH 1x0.7x2 meters / weight 650Kg Subject to errors / input mistakes

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Gillardon GB 40 VE Year of manufacture 2012 No.4519-130-3913 Electromagnetic feed 0.1/0.16/0.25 on the cross lever at the touch of a button Infinitely variable speeds from 60-600 rpm 2 step motor Ljdpfxotw Rk Tj Agzoru working light Emergency stop button 200mm pinol stroke 350mm throat depth Table size 630x535mm--clamping surface 400x500mm MK 4 holder--with Röhm quick-action chuck 3-16mm Height of the machine 2060mm--weight approx. 480kg The machine runs very smoothly and precisely Table and columns with clear signs of wear Digital speed display without function + vice Cekaba-Bon 230mm

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET Lsdovuz T Nopfx Agzjru With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 3 MK Ljdpfx Agsw Tdvzjzeru table-size 560 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1400 U/min total power requirement 1,8 KW weight of the machine ca. 0,55 t dimensions 1,2 x 0,8 x 2,1 m Pillar drill with: - Feed - Variable spindle speed

Condition: like new (used), Technical specifications Drilling capacity in steel (diameter): 32 mm Thrust: 320 mm Drilling stroke: 170 mm MK mount: 4 Speed range: Table size: 570 x 480 mm Total power requirement: Lrsdpsvzgm Ijfx Agzju 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: Lrsdpfxokzg T Rs Agzeu - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW - space requirement approx. W 1200 x H 2800 x D 2300 mm - weight approx. 1500 kg - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

Condition: good (used), Gang drilling machine - GILLARDON GR 20-3 Lsdjw H Thmopfx Agzjru - From training workshop - 3 drilling units - Speed range: 150-3000 rpm - Infinitely variable speed regulation - Morse taper MK3 - Speed display - Forward/reverse rotation - Foot switch - Drill chuck Dimensions (LxWxH): 1.6x1.2x1.8 meters / Weight: 1800 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting Lredpfsw Id Ndex Agzou

Condition: good (used), Column drilling machine / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - stepless 60-1800 rpm -Direction of rotation / right-left -Morse taper MK 3 -Swing 290mm -Quill travel 175mm -Table area 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Ledpfx Aewr T Ixjgzoru Dimensions: LxWxH 0.7x0.7x2 meters / weight 450Kg Errors / input mistakes excepted

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system Ledpowdvwtsfx Agzsru

Condition: good (used), GILLARDON GB 20 - Column Drilling Machine from UNIVERSITY - Infinitely variable speed control - Adapted to MT 3 - Max. drilling capacity in steel: 30 mm - Throat depth: 285 mm - Quill stroke: 150 mm - Table clamping surface: 400x400 mm - Table height adjustment approx. 650 mm - Drilling depth stop - Speed display - Emergency stop Ledpfjw N Hk Tsx Agzsru - Work light - Foot switch - Documentation Dimensions: LxWxH 0.7x0.6x1.85 meters / Weight 650 kg Errors and omissions excepted

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1184-135-973, Offer 25248 Technical data: - Drilling capacity in steel ST 60: 45 mm - Maximum drilling capacity in steel ST 60: 55 mm - Spindle taper: MK 4 - Spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward and reverse operation Lrjdpfx Aow Rvzdegzju - 3 automatic feeds with electromagnetic engagement: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Maximum distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Required floor space approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Keyless drill chuck 1 – 13 mm - Emergency stop button - Lighting