Used Glass Cutting Table for sale (29,738)

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Fsdozii A Depfx Am Espp Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, CATALOGUE NUMBER RE041 - new machine TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Fjdpfx Aj Aggdzem Ejpp Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Fpedpfx Ajyxprtsm Eep

Condition: used, axle configuration: 3 axles, first registration: 03/2001, total length: 13,400 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,560 mm, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS - Central lubrication system = Notes = Number of axles: 3, Payload: 37420 kg, Tare weight: 7580 kg, Gross vehicle weight: 45000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Central lubrication system, Suspension type: Full air, ABS, EBS, Body year of manufacture: 2001, Low-loader type: Semi low-loader, Loading area length: 970 cm, Gooseneck length: 335 cm, CONCRETE TRANSPORT 7-2-2027 APK = Additional Information = Fpsdpfx Amozcakts Esp General information Cab: Day cab License plate: OG-79-NR Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tire size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 11 mm; Tire tread depth right: 13 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 14 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Unladen weight: 7,580 kg Payload: 37,420 kg GVW: 45,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 02/2027 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler Fpodpfx Aohturvsm Ejp incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. Fpedpfx Aocnxamsm Esp With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 1 h, laser power: 30 W, laser wavelength: 1,070 nm, input voltage: 230 V, type of input current: AC, type of cooling: air, shaft length: 1,070 mm, Equipment: cabin, Laser engraving machine with 30-watt laser power - Exhibition machine / used demonstration unit with approximately 1 hour of use - Worth taking a look - Includes Windows 11 PC 64-bit (including monitor, keyboard, and mouse) - Fully installed and adjusted - Engraving software in German - Very easy to operate - Simply turn on and start - Fiber laser source with 30 watts for high-contrast and fast markings with very high resolution (see images) - Wobble function, e.g., for cleaning metal components - Deep engraving up to 3 mm possible - For engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 390 x 270 x 350 mm (L x W x H) - Clamping surface with fastening threads in a 50 mm grid - LED work area lighting - 50 mm pipe connection for smoke extraction - Engraving area up to 170 x 170 mm - Motorized adjustment of the focus position - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Fodpfxod Ha I So Am Eopp Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approximately: Width: 450 mm Height: 800 mm Depth: 750 mm Weight: approximately 80 kg

Condition: new, 1 set of table shear blades for a motor-driven table shear Manufacturer: LAMI NOVA Model: MS 3003 Cutting length: 3050 mm Cutting thickness: 3 mm Delivery time: immediate, subject to prior sale Options: Fsdpfx Ajddzg Nsm Espp Additional spare parts or service available upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 2 h, laser power: 20 W, laser wavelength: 355 nm, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, warranty duration: 12 months, shaft length: 355 mm, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start Fsdpfx Ameflrnaj Espp - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: used, Year of construction: 1993, Technical details: rotary table diameter: 2x700 mm grinding height: 200 mm grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 weight of tools max.: 650 kg table speed: 5-10 m/min Fodpfeu Ngp Nex Am Ejpp rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine approx.LxWxH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D. *

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: Fpedpfx Asu Nwfujm Eop -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, Fpsdpou N D Rqefx Am Ejp flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Year of construction: 1989, condition: used, Technical details: table length: - mm Fpjdpfx Amju N D R Do Ejp table width: - mm table load: - t total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines *

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, operating hours: 4,000 h, laser power: 10,000 W, working range: 3,000 mm, Used Bystronic Bysmart 3015 fiber 10kw cnc laser cutting machine for sale Year: 2021 Technical specs / Details table length: 3000 mm table width: 1500 mm burner heads: 10,00 Watt / 10kw Bysprint / Bystar fibre laser Description Fedpfjucd Awjx Am Eopp Complete with: Auto focus Auto nozzle centring Nominal sheet size xy: 3000 x 1500 mm Cutting area xyz: 3048 x 1524 x 70 mm Positioning accuracy Pa: +/- 0,1 mm Repeatability Ps: +/- 0,05 mm Maximum workpiece weight: 890 kg Operation via panel: ByVision Touchscreen and manual control unit

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: Fpjdpfxeu Tp N De Am Eep - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2026, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Fsdpfjtgychox Am Eopp Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Fpodpfxjz S Egij Am Eop Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm Fodpeu N D Szjfx Am Espp table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, Gruse Type: ELD 1-16-1 Gruse Lifting Table ELD 1-16-1 Easily lift heavy loads Scissor lift table: Lifting table with double scissors ELD lifting table Type description: Type designation ELD Load capacity 500 kg Overall height 350 mm Useful lift height 1600 mm Total height 1950 mm Tabletop 1250 x 800 mm Base frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Fpodpfx Ajzgclysm Eop Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Zwick   Type: BZ1.0 / TH1S   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone. Fpsdpszdryzjfx Am Eop

Condition: used, LDS Type: V895-440 HBT900C with SPA50K amplifier Technical data: Actuator dimensions: 440 mm Sine force vector 55.6 kN (peak) Random force vector 55.6 kN (RMS) Fedpezg Tybjfx Am Eepp Half-sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Sine acceleration max. 981 m/s² Random acceleration max. 490 m/s² Velocity max. 1.6 m/s Displacement ± 63.5 mm Vibration exciter mass 55 kg Max. load 700 kg Amplifier dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight 622 kg Slip table: Working area: 900 mm x 900 mm Plate thickness: 50 mm Plate weight: 80.4 kg Max. load: 7250 kg Usable frequency range 5-2000 Hz Condition: used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, LDS Type: V824 + Tira Sliding Table + SPA30K Swing-arm exciter for medium forces Technical data: Fodpozg Tyhjfx Am Eepp Sine force vector 26,689 kN (peak) Random force vector 25,355 kN (rms) Half-sine force vector 53,376 kN Mass of moving element 21.55 kg Frequency range DC - 3200 Hz Sine acceleration max. 981 m/s² Random acceleration max. 50 gn rms Velocity max. 1.78 m/s Displacement ± 12.7 mm Sliding table: W x H x D: approx. 1650 mm x 925 mm x 2450 mm Working area: 991 mm * 991 mm Usable frequency range 0 to 2000 Hz Plate thickness: 50 mm Plate weight: 94 kg Max. load: 2200 kg Condition: used Weight: Shaker approx. 1725 kg Sliding table 3500 kg Scope of supply: (See images) Total weight approx. 5300 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 3,500mm x 2,200mm Fpjdozyaf Rspfx Am Eop The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Fedpfoz A Ia Sex Am Espp Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: used, total height: 1,450 mm, total length: 1,500 mm, total width: 600 mm, Year of manufacture: 1995 Colour: Blue Empty weight: 400 kg - Details: - └ Description: Table 1500x580 lift height 2130 mm lift capacity 3000 kg - Year: 1995 Fpedpfx Amjz A Tako Eop - CE marking present: Yes - Serial number: 6749 - Transport dimensions: 1500mm x 600mm x 1450mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum