Used Grid Plate for sale (13,636)

Condition: used, Description: * Due to changes in our milling operations and production restructuring, we are selling a grid plate/clamping plate and a clamping angle on short notice. * Grid plate/clamping plate: Dimensions: 1,000x800x45mm Bore spacing: 40x40mm Clamping thread: M12 Clamping sleeve: d12F7 * Clamping angle with grid plates: Dodpszp Hnqjfx Ap Ioku Base area: 350x280x40mm Angle height: 350mm 2x grid plates: 350x280x25mm * Important: For logistical reasons, we only sell within Europe. * "The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee as to their suitability for a particular purpose or their freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damages resulting from the use of the goods. Any claims by the buyer against the seller are excluded." * Also available for individual sale. Date: 18.08.2026 * Price for plate and angle: €1,200 (negotiable) * I am available at any time to answer questions and provide further information.

Condition: good (used), Bohner Griddle Plate Tabletop Unit BGM 80 A Multi-Grill 8 kW Multifunctional for frying, cooking, and reheating food The multi-grill is equipped with a special grill surface that enables the preparation of all kinds of dishes directly on the grill plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Due to its larger capacity, it is also ideally suited for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Equipment: 2 heating zones Dimensions of the grill surface: W x D 740 x 540 mm Connection value: 400 V / 8.0 kW Fuse rating: 16 Amps Weight: 40 kg Dkedpfxsxuqnre Ap Ieu Housing made entirely of stainless steel Housing height: 170 mm Device feet: 30 mm high, adjustable up to a maximum of 75 mm Steel plate, specially hardened Hard chrome-plated Energy-saving technology Heating can be continuously adjusted via a thermostat Optimal thermal conductivity Large, full-surface heat storage Warm-keeping zone on the operator side, 120 mm wide Grease drain/residue collection: centered on the operator side, 130 x 30 mm More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: good (used), Zanussi N7RE Electric Griddle with Open Base – Used With 2 heating zones, each 4.2 kW Working temperature of each heating zone is thermostatically adjustable from 120 - 280°C Griddle surface tilted 1.5° forward for fat drainage 1.5 mm thick front and top plate made of stainless steel, side and rear panels made of stainless steel Scotch-Brite finish, edges rounded on both sides IPX4 – splash-proof Comes standard with a grease collection tray and a 3-sided stainless steel splash guard Dodpjxvy Hyefx Ap Ioku With height-adjustable feet (+50 mm) External dimensions (W x D x H): 800 x 700 x 850 mm Plate dimensions (W x D): 730 x 540 mm Cabinet (W x D x H): 680 x 640 x 420 mm Weight: 80 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, plate size: 500 x 1000 mm plate thickness incl. ribbing: 80 mm plate thickness of upper plate: 30 mm weight: ca. 170 kg Dodpfx Ajb T R Duop Ieku

Condition: used, plate size: 800 x 2000 mm Dkedpfx Asb T R Dyop Isu plate thickness incl. ribbing: 80 mm plate thickness of upper plate: 30 mm weight: ca. 400 kg

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Dkjdpfsz Dix Eox Ap Isu Type: T10 Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: used, Cast bed Dkedpfx Aoz Nyc Hep Iju Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Djdpsz Di D Iefx Ap Ieku Please contact us for additional information or to make an offer.

Condition: used, Cast iron bed Djdpfjz H Ixcsx Ap Isku Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots Dkodpfx Apsz I A Nre Isu T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Dedpez I A Ubjfx Ap Isku Equipped with Levelling feet Weight: approx 3 T

Year of construction: 2021, condition: new, Gastro M Electric Griddles Demonstration unit without original packaging. NEW unit with warranty. The Gastro M series is robust, powerful, energy-efficient, easy to clean, and has a modern look. All devices are made of stainless steel and can be connected with connecting bridges. Gastro M is the indispensable link in the professional kitchen. Electric griddles with smoothly polished grilling surfaces. Fast heating time, built-in grease collection drawer, thermostatically controlled zone with built-in on/off switch and indicator light. Easy to clean. Stainless steel housing High-quality cast iron plate Integrated grease collection drawer Adjustable thermostat Even heating Suitable for base cabinet AGL913 & underframe AGL911 Specification: Dsdpfx Ajhgwd Tjp Ijku Gastro M Model 60/30FTE 300mm wide Power: 3kW/400V Dimensions: 600(D) x 300(W) x 280(H)mm Weight: 27kg Accessories available upon request. If you would like a detailed consultation, please contact us. All dimensions = approximate dimensions Photo similar

Condition: used, Year of construction: 2010, Clamping tower, manufactured by AMF, with 6 clamping surfaces. Dimensions: 600 mm x 600 mm x 1060 mm Clamping surfaces: 290 mm x 1060 mm (6 sides) Grid pattern of holes, spacing: 50 mm x 50 mm (100 holes per side with threads and clearance holes) Base plate: 760 mm x 735 mm x 50 mm Overall height: 1110 mm 2 units in stock. Price quoted is for 1 unit. Dodjcum N Sspfx Ap Ieku

Condition: defective spare-parts repository (used), Used three-roll round bending machine with a roller length of 2000 mm and a roller diameter of 170 mm. Mechanically in good condition. A new electrical wiring installation is required. Djdpfxsz N Hr Uo Ap Ioku

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Dkedpfxewk Rlxe Ap Isu max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Djdpfjywziuex Ap Ijku

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t Dedpsu Icpcofx Ap Isku dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Year of construction: 2004, condition: used, Colour: Yellow Empty weight: 545 kg Dimensions (LxBxH): 189 x 66 x 107 cm Availability: in stock Dodpfxsz N Hg So Ap Ioku

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout Dksdpfx Apsy Aubus Iju safety installations with emergency stop

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m Djdpfsvc Amtsx Ap Ijku The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. Djdpfxoz N Hxno Ap Ioku engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Year of construction: 2016, condition: used, functionality: fully functional, Two Dybvad plate freezers are available for sale from our location in 45891 Gelsenkirchen. These plate freezers are used and come from a business liquidation. Currently, the plate freezers are still connected to the power supply and can be inspected after scheduling an appointment. For technical specifications, please contact the manufacturer. Dedjz I Abnspfx Ap Ijku Disassembly and loading are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Dedjz I D Agspfx Ap Ijku Digital display of roll positions Capability to form cones Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request.

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine Dkjdpfx Aez N Hxhop Iju - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information Dkodpfx Ajz Iy Ncep Iou incl. 15 plates