Used Guide Cover for sale (11,297)

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm 60 cross feed rates: 0.03 – 28 mm/rev Lhjdpfx Akozlm Ucoqsn 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional Options and Accessories = Other - Remote-controlled central locking - Lift axle - Air suspension - Fifth wheel coupling - Spotlights Other - Sun visor = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Ledpfxezc Rhce Akqjhn Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. Ljdozagkzjpfx Akqohn In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 08/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Exhaust system concept, WLTP3 N1-III, N2//EU6EA * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * One towing eye at the front * Preparation for trailer hitch (incl. trailer stabilization) * Fuel tank 75 l * Differential lock * Approved as 3.5t * Front axle, reinforced (2,100 kg load capacity) * Permissible total weight 3,500 kg * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * Tires 235/60 R 17 C 117/115 R, optimized for rolling resistance * Summer tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG 1 with ABS programming * Climatronic air conditioning in the cab * Daytime running lights with automatic assist lights, coming and leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment Lsdpezp A E Ssfx Akqshn * Fog lights incl. cornering lights * Lateral marker lights * With headlight cleaning system, with washer fluid level indicator, with heated windshield washer nozzles at the front * Step lighting * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * Normal roof * Entry handles on the rear pillars * Radiator grille, black with chrome trim * Rear wing doors with enlarged opening angle * Windshield wiper intermittent switch with light and rain sensor * Sliding door, right, in the cargo/passenger compartment * Laminated windshield with heat-insulating glazing, heated * Front bumper in gray with painted trim in vehicle color * Airbag for driver and front passenger with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders * Three-point automatic seatbelts with seatbelt height adjustment and electric belt tensioners at the front * 12-V sockets in the cab * Seatbelt warning, E-contact in the seatbelt lock * 2 remote control folding keys * Keyless Go with safe lock * Auxiliary water heater, programmable, with remote control * Chrome package * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Seat heating, separately adjustable on the driver's side * Digital instrument cluster * Tire pressure monitoring indicator * External, USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business * Digital radio reception (DAB+) * MAN Media Van Navigation Business package * Wired & Wireless App-Connect * Online service, with OCU, with head unit * Coding, without WFS connection * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * Electronic stability program (ESP) and ABS with electric differential lock * Park steering assist * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant 'Light Assist' * Driver fatigue detection * Lane change assist * Side wind assist * B

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment Lhjdpfx Akjzt Ni Eoqsn * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: used, mileage: 34 km, power: 92 kW (125.09 HP), first registration: 07/2026, fuel type: gasoline, overall weight: 1,940 kg, color: white, number of seats: 2, total length: 4,343 mm, total width: 1,813 mm, total height: 1,853 mm, loading space length: 1,803 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 4027.NW26.TU55821 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Trailer hitch, fixed * Load compartment lighting, LED * Load securing package: load compartment rails in the middle position and 10 lashing eyes * Winter package 2: - heated steering wheel - heated windshield - seat package 5: - driver's seat, 6-way adjustable and heated - passenger seat, 4-way adjustable and heated - lumbar support for driver's seat - armrest for driver's seat - full bulkhead without window * Sliding door, right and left OTHER EQUIPMENT * "Active" badge * 12-volt socket in the passenger compartment * 2 vehicle keys with remote control * ABS * Sliding door guide cover strip * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Exterior mirrors, electrically adjustable and heated, painted black * On-board computer * Roof rails, silver * Double-wing tailgate * Tachometer * Third brake light (with LEDs) * Door sill trims "Active" * ESP * Vehicle modem 5G * Ford Easy Fuel * FordPass Connect * Front floor mats * 7-speed automatic transmission * Rubber floor mat in the cab * Glove compartment with lid Lhjdpfxszh Si Do Akqon * Air conditioning * Head and shoulder airbags, right and left * Headrests (2), height-adjustable * Radiator grille, in black * Paint: solid color * Load compartment lighting * Charging station, inductive * Audio remote control on the steering wheel * Center console, large * Fog lights * Emergency brake light * Emergency call assistant * Without rear window * Gasoline particulate filter (OPF) * Driver Assistance Package 2: Ford Audio with 8-inch touchscreen and Ford SYNC 4 - Pre-Collision Assist, camera-based - automatic high beam assistant - lane keeping assist including lane departure warning - cruise control - intelligent speed limiter with speed limit display - wrong-way driving warning - traffic sign recognition system - parking pilot system front + rear - rear view camera - power windows front, electric with quick up/down function for driver and passenger * Seat Package 3: driver's seat, 6-way adjustable - passenger seat, 4-way adjustable - lumbar support for driver's seat - armrest for driver's seat * Upholstery: fabric * Radio: Audio system 2: Digital radio receiver DAB/DAB+ (Digital Audio Broadcasting) - 4 speakers front - USB port - Bluetooth hands-free system and audio streaming - Android Auto and Apple CarPlay (wireless pairing) * USB ports, front * Tire repair kit * Tire pressure monitoring system * Wheels: alloy wheels 7 J x 17 * Rear lights, halogen * Windshield wipers with rain sensor * Headlights, with chrome trim * Side airbags * Power steering * Seat belts * Start-stop system * Ford Power start function * Daytime running lights * Traction control (TCS) * Door handles, interior chrome * Underrun protection front and rear * Immobilizer * Central locking with remote control ... and more ---- 1st owner. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from date of initial registration (can be extended on request). We will gladly accept your vehicle as part payment. Financing/leasing also possible without down payment! Do you have any further questions? We will be happy to advise you! Since, despite existing controls, a deviation of the vehicle from the description above cannot be ruled out, we would like to point out that the vehicle description only serves to identify the vehicle in general and does not constitute a guarantee in the legal sense. The agree

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * Towing eye in the front * Preparation for trailer hitch * Standard wheelbase 3,640 mm * Fuel tank 75 l * Differential lock on the rear axle (manually engageable, mechanical) * Approved as a 3.5t vehicle * Reinforced front axle * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, optimized for rolling resistance * All-season tires * Electronic immobilizer * Electrical terminal block and auxiliary wiring harness * 'Climatronic' air conditioning in the driver's cab * Daytime running lights with automatic headlights and coming/leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights including cornering lights * Side marker lights * Headlight cleaning system * Washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * Standard roof * Entry handles on the rear pillars * Radiator grille, black with chrome trim * Rear wing doors with increased opening angle * Windshield wiper intermittent operation with light and rain sensor * Sliding door, right * Laminated windshield with heat-reflective glazing, heated * Airbags for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN compartments and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable lid, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket, cup holder * Three-point automatic seat belts with height adjustment * 12-V socket in the driver's cab (in the instrument panel) * Seat belt warning, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in 'Toronto Grid' fabric Lhedpfxszc Dg Ss Akqen * Heated driver and front passenger seats, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business (12.9 inch) * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist 'Light Assist' * Attention and fatigue warning * Lane change assist * Side wind assist * Blind spot detection on both sides and exit warning * Turning assistant * Emergency assistant (Active lane keeping assist and Emergency Assist and traffic jam assistant) * Intelligent speed assistant * With multifunction camera * Cruise Assist Plus * Entry handle on the partition in the cargo compartment * Part

Condition: new, Year of construction: 2026, functionality: fully functional, Precision cross table with screw protection cover A precision cross table equipped with a screw protection cover. The sliding guides, manufactured using a dovetail design, significantly improve table rigidity and allow for effective elimination of play in the feed movements. Cross table description The cross table is manufactured from high-quality materials, ensuring durability and reliable operation. It is an ideal accessory for drilling machines, milling machines, and similar equipment, providing precise positioning during boring and drilling operations. The screw protection cover prevents chips and debris from entering the feed mechanism. An additional advantage of the table is the integrated scale, which allows constant monitoring of the table position along the X and Y axes. Vernier scale: 2.0 mm / 0.01 mm Lsdpevu Tqyjfx Akqohn

Condition: used, Year of construction: 2025, Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure aus Edelstahl • 2-roller padder with supporting roll and swimming roll, Küsters system, • additional new frequency drive for fitting the machine into a system is possible. • Photos show similar machines in delivery condition • Warranty: 12 months • This machine is completely manufactured after receipt of order. Lhodpfxou Rt R Ne Akqen

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting Lhsdpfx Ajvpalajkqen parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Ljdpfjixupmjx Akqshn Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h Lsdpeixupujfx Akqjhn in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: new, Work and assembly table New unit Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a workbench top made of selected, solid red beech wood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise – even with asymmetrical loading of the table top. TECHNICAL DATA Workbench top without clamps: 1,700 x 640 x 120 mm Ljdpokwhwzsfx Akqshn 2 clamp keys: Front clamp made of solid cast/steel construction, rear clamp robust aluminum guide (with adjustable guide prism and plastic sliding guide) Table top thickness: 120 / 60 mm Useful stroke: 300 mm Overall height ErgoPlan: 780 mm Weight of the workbench top: approx. 95 kg Weight: approx. 240 kg The attached panel on the back serves as a protective cover against shearing and as a crush protection cover. The lifting unit is concealed in the left lifting column and is therefore protected from dirt and damage. Load capacity up to 400 kg Overall height max. 1080 mm 2 bench hooks Ergoplan, consisting of aluminum round bench hooks with ball lock 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing pin, adjustable up to 200 mm workpiece thickness, 360° swiveling Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; Lhjdpfx Ajmcw S Sokqen 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Lsdpfx Ajnximujkqshn Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: good (used), Lamellar aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide guard, guide cover Ledpfx Aeb A R I Nekqehn -Dimensions: 630/205/H5 mm -Weight: 3.5 kg

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Lhedpfob Rnv Sox Akqen Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm Lhedpfx Akscn Rd Toqjn -Weight: 8.4 kg

Condition: like new (used), functionality: fully functional, Completely restored guidework for debarker, as good as new Ledpfxoq Dp Ers Akqohn

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Lhedpshv A A Dofx Akqon Weight 45 tons Very good condition

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Lhodpfx Aksfibfajqsn Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Ledpfxofiqa Rs Akqjhn Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lhjdpfxjfiqdco Akqen Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Condition: good (used), Guide rail protection systems, roof window roller shutters, blinds, roller shutter slats, roller shutter motors, tubular motors -Eitec: Aluminum roller shutter for covering tools and fixtures -Length: 1860 mm -Width: 745 mm -Box dimensions: 815/385/H310 mm Lhedpfx Akoflvk Aoqsn -Weight: 60 kg

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows Application Suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Distance between stands: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height for tool clearance and the penetration depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Lhjdped Tpadsfx Akqjn Overhang: 410 mm Support arms: 2 pcs Backstops: 2 pcs Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel direction: 650 mm Speed of the R-axis max.: 350 mm/sec R-axis travel direction: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11500 kg Control system: Delem-69 T Options: Y1, Y2, X, R (4 axes) X=650mm X, R Control system - CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning Adjustable front support arms with T-slot, clip stop, and guide along the entire line Rear stop: Siemens DC servo motor & linear guide & ball screw system Protective cover CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila Hyd. top - NSCL-I-HC/UPB - PRO - Max load 180 t/m - Power pack required Wila Hyd. bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m - Power pack required Power pack for hydraulic clamping DAM (Durma angle measuring system) 2 YEAR WARRANTY The machine can be inspected and demonstrated at any time by appointment at our showroom in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.