Used Haas Multigrind for sale (227)

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Haas Machining Center 3 Axes + 1 Model VF-1DHE Year 2002 Hedpfjz Ir Nuex Ak Ujnu Documentation Available Includes 4-Axis Rotary Table Video Available Inspection Possible

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg Hjdpfx Akswx I N Do Ujnu T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 29,800 W, overall weight: 11,000 kg, number of axes: 3, This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details. • Swing over bed: 1,016 mm • Swing over cross slide: 635 mm • Max. bar capacity: 101.6 mm • C-axis: Full-featured C-axis • Tool presetter: Yes • Spindle nose: A2-8 • Spindle bore: approx. 116.8 mm • Gearbox: 2-speed • Chuck: Kitagawa B-15, 3-jaw • Vector drive: 40/30 HP closed-loop vector drive • Electrical enclosure: NEMA Type 1 (indoor use only) • Voltage: 360/480 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A Hedez Ryqmepfx Ak Uonu • Short-circuit interrupting capacity: 10,000 A • Machine status: Dismantled, not under power; seller can load on truck with crane for approx. €800 Additional equipment • Iscar Fast Feed Tools tooling/solutions (as indicated by stickers) • Work light • Coolant tank and chip tray assembly • Foot pedal control • Status beacon light Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar Hodpjzxz Hgefx Ak Uonu weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Hedpfxox Nf Tbe Ak Uonu Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm Hnjdpfx Akez Izyis Ueu • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Hsdpfx Akjzz Agte Usnu Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Hnodpfx Akjzzbits Ueu Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle Hnsdozk H Hvopfx Ak Usu -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Bar capacity, maximum speed: 51mm, 4000rpm Maximum power rating, drive system: 22.4kW, belt drive Spindle nose, chuck size: A2-6, 210mm Axis travels (X, Z): 236mm, 533mm 12-station VDI tool turret Haas controller Rigid tapping option Automatic tool presetter Hedovamdqepfx Ak Usnu Belt-type chip conveyor Programmable hydraulic tailstock Manufactured in 2013 Machine in very good condition. Machine fully inspected, cleaned, and aligned. More pictures and videos are available.

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 Hnedpfxezvy D Eo Ak Uju LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Hnodpfx Asz D D I Uek Usu

Condition: good (used), Year of construction: 2016, Description: The machine is in good technical condition and can be tested upon prior agreement. It includes all equipment and, if applicable, accessories (holders, tools, etc.). Hnedeztx Spjpfx Ak Ueu

Condition: used, Year of construction: 2000, Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement. Hodpfx Akez N Harj Uenu

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Hjdpfx Akjz Dq Nfo Usnu Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. Hnsdpeywgaxjfx Ak Uou The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Hedpfxjz Erwtj Ak Uonu Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, overall weight: 4,000 kg, controller manufacturer: HAAS, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details. • Chuck size: 8.3 in / 210 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (BOT turret): 13.00 in / 330 mm Hodpfxoz Ha Ups Ak Ujnu • Max cutting diameter (BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 2.50 in / 64 mm • X-axis rapid rate: 945 ipm / 24.0 m/min • Z-axis rapid rate: 945 ipm / 24.0 m/min • X-axis max thrust: 4,100 lbf / 18,238 N • Z-axis max thrust: 5,100 lbf / 22,686 N • Spindle nose: A2-6 • Spindle drive system: Direct speed, belt drive • Spindle max torque: 150.0 ft-lbf @ 500 rpm / 203.0 Nm @ 500 rpm • Spindle bore: 3.50 in / 88.9 mm • Turret stations: 12 stations (VDI 40) • Boring bar rear clearance: 4.00 in / 102.0 mm • Coolant tank capacity: 55 gal / 208 L • Coolant pump: 1 HP / 0.75 kW variable-flow (45 L/min @ 2 bar) • Air requirement: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Air pressure minimum: 80 psi / 5.5 bar • Air line / coupler size: 3/8 in • Low voltage electrical: 220 VAC (3 phase), 40 A full load • High voltage electrical: 440 VAC (3 phase), 20 A full load (internal non-isolated transformer 380–480V included) • Shipping dimensions: 143 in x 90 in x 92 in / 362 cm x 229 cm x 234 cm • Control system: Haas NextGen Control with touchscreen interface, 1 GB memory, Ethernet, Wi‑Fi, HaasConnect Remote Monitoring, and Haas Drop • Included machine features/options: Automatic Tool Presetter; Programmable Hydraulic Tailstock (MT4); Rigid Tapping; M130 Media Display; Safe Run; Power Failure Detection Module; Visual Part Programming System Additional equipment • Belt-type chip conveyor • Chip strainer filter kit (200 micron) Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm Hnedpfx Aezh Eh Tjk Uou • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Hnsdpfx Akevwz T Uo Usu

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Hodpfx Akjyftdfs Uonu Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. Hedpfx Aoyfn Ilek Uenu We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 3,048 mm, feed length Y-axis: 813 mm, feed length Z-axis: 762 mm, controller model: NGC, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 50-taper spindle with a 2-speed gearbox. Customizable to meet your specific requirements. Hodpfx Aszr U S Njk Usnu Ideal for working with tougher materials and larger-diameter cutting tools.

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Hjdpfx Aoza Ucrjk Uenu Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 12000 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 70 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes Hnedpez Ah S Dofx Ak Ueu • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes