Used Haas Vertical Machining Centers for sale (245)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Nwodpfox Sq Sbsx Ag Iec Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg Njdpet Dmmvjfx Ag Iewc MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Nodpfjwx I N Dex Ag Iewc Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center Njdowvl Acopfx Ag Iswc - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - oil dust collector - prepared for cableless 3D touch probe Renishaw

Condition: used, Year of construction: 2005, Technical details: Nsdpjx Iwr Tefx Ag Iowc x-travel: 750 mm y-travel: 406 mm z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, controller model: HAAS, table width: 1,320 mm, table length: 460 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is set up in our warehouse and can be inspected under power! Machine is equipped with: - Chip conveyor - Internal cooling Njdpfsyk Erfox Ag Iowc - Programmable coolant nozzle - 24-position tool changer - Rinse gun - Coolant tank - 2 machine lamps - Approx. 40 tool holders including tools - Original documentation.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Machining centre with 15,000 spindle rpm and side mounting. Haas 4-axis drive and wiring. Travels: x=762 mm / y=406 mm / z=508 mm. Tool changer with 24+1 tools, chip removal system, Renishaw measurement equipment, suitable for high-speed machining. Expanded memory. Very high-quality machine. Nedjyna Rdjpfx Ag Iewc

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Njdpfx Aoykay Dsg Ijwc Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: excellent (used), HAAS VF-2SS YEAR OF MANUFACTURE: 2022 X-axis travel: 762 mm Y-axis travel: 406 mm Nwjdpfjyl I N Nsx Ag Ijc Z-axis travel: 508 mm Max. spindle speed: 12,000 rpm PulseJet system Additional coolant filter Through-spindle coolant (IKZ) Number of tools: 30+1 Taper type: BT40 / CT40

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Nodpfxsyf E D Re Ag Iswc Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information. Nwedpfxeym N Eho Ag Ioc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table size D500 mm Table load 300 kg X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degrees C rotation 0.001 - 360 degrees Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22.4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazine 30+1 positions Nwedpfx Agsylw Tde Ijc Max. tool diameter (adjacent) D64 mm Max. tool diameter (adjacent slots empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kg Machine weight 6500 kg Machine dimensions LxWxH = 4420 x 2340 x 2540 mm

Condition: used, Year of construction: 2022, x-travel 508 mm Nwodpfjylz Dgex Ag Ijc y-travel 508 mm z-travel 508 mm weight of the machine ca. 3650 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 1139797, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, We offer this ready for use Haas VF-2 vertical machining center, year of construction 2017. Nsdpfx Ajyll Dqeg Iowc Manufacturer: Haas Model: VF-2 Year of construction: 2017 In perfect working condition, comes with Chip auger, programmable coolant, WIPS and Rigid tapping. Comes with Renishaw probe and several SK40 toolholders as well as tool assembly station, 2 x tool carts, compressor, packing table, packing tape and bubble wrap. Moving countries so would like to get this sold and out of the shop as soon as possible.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg Nsdpsykqtzefx Ag Iswc MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 39385, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, nominal power (apparent): 15 kVA, torque: 23 Nm, controller model: HAAS / Fanuc / DIN ISO, overall weight: 1,542 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 10, type of input current: three-phase, Equipment: rotational speed infinitely variable, Vertical CNC Machining Center For sale is a vertical CNC machining center from the manufacturer HAAS Automation, model Super Mini Mill, year of manufacture 12/2004. The machine is in used, fully functional condition and is ideally suited for precise milling tasks in single-part and small-batch production, as well as for training and prototyping applications. Technical Specifications and Equipment • Spindle speed: up to 10,000 rpm, max. torque 23 Nm at 2,400 rpm, max. 11.2 kW Nsdpfx Aoylvm Asg Iswc • Travel (X/Y/Z): 406 mm / 305 mm / 254 mm • Table with 3 T-slots, 14 mm wide, spaced 110 mm from center • SK40 tool taper • 3D tool measurement: integrated Renishaw measurement system TS27R for automatic tool length and diameter determination • Included option: CNC control functions - coordinate rotation and coordinate scaling • Included option: High-pressure coolant pump • Included option: Quick Code, user-defined macros • Included option: USB port for 128MB USB sticks • Included option: Clear splash guard • Included option: High-speed machining • Included option: Synchronized tapping without floating tap holder • Included option: Spindle orientation • 10-position high-speed carousel tool changer • Footprint: 1981 x 2032 mm • Power supply: 15 kVA • Door opening width: 610 mm • Machine weight: 1,542 kg Application Areas • Precision machining of small to medium-sized workpieces • Tool and mold making • Prototype manufacturing • Training and education purposes The machine can be viewed under power by appointment. Further technical details can be provided upon request. Terms and Conditions: We guarantee that the machine is currently operational. Any further warranty is excluded. Legal liability for defects is not assumed. Risk passes to the buyer upon loading. Payment must be made 100% in advance before loading. An invoice with VAT will be issued in advance and sent electronically as a PDF. Any future costs, losses, or warranty claims arising from the use or non-use of the machine by the customer are excluded.

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,118 h, spindle motor power: 22 W, spindle nose: BT40, number of slots in tool magazine: 40, Through-spindle coolant 20 bar Filtration Belt chip conveyor Workpiece probe Tool probe Njdpfx Aox I Nutog Ijwc Robot interface preparation Automatic (side) door Portable handwheel Washing gun High-speed machining

Condition: good (used), Year of construction: 2001, Haas VF4 Year of manufacture: 2001 Spindle speed: 7500 rpm Njdpfx Asyhpa Ieg Iswc Tool changer: 24 stations Including 4th axis

Condition: excellent (used), Year of construction: 2014, Haas Minimill 2 Year of manufacture: 2014 Spindle speed: 10,000 rpm 24-position tool changer USB Very good running condition Nodpfx Agoyg D Uwe Iewc Video available

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Controller HAAS Intuitiv programming with USB slot Table size 1372 x 610 mm Table load max. 794 mm „T” slots in table 16 x 80 mm and 7 pcs. Travel X axis 1016 mm Travel Y axis 660 mm Travel Z axis 635 mm Distance of spindle end to table surface (max) 742 mm Distance of spindle end to table surface (min) 107 mm Spindle speed 12000 rpm Spindle taper SK40 Spindle power 22,4 kW ATC magazin 30+1 pots Weight 6800 kgs Dimensions LxWxH = 4000 x 2500 x 2700 mm Accessories and features • Renishaw tool presetter and zero point presetter • HSM (for CAM production, 1000 lines pre-reading) • Digital MPG • for 4th axis preparation • TCS (300 psi), • Tool cooling from outside • extra filters • chip conveyor • programmable coolant nozzles • spindle orientation • coordinate system rotation • media file on screen Nsdew Tc H Sspfx Ag Iowc • visual programing possibility Very good condition. Only used in single production.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M.-Nr.: 2707, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 280 mm, controller manufacturer: Siemens, controller model: SINUMERIK-System 840D, table width: 440 mm, table length: 1,000 mm, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 10, mount diameter: 50 mm, CNC Tool Grinding Machine HAAS Multigrind Condition: Very good. Operated exclusively with oil. Robust 5-axis universal tool grinding machine with a grinding length of up to 700 mm. Equipment and accessories: - Siemens 840 D control system - 10-position grinding wheel changer - Direct measuring systems - Automatic fire extinguishing system Technical data: Nwsdpfew Ini Usx Ag Iec - Grinding length up to 700 mm - Diameter up to 400 mm - Height up to 280 mm - Table size 1,000 x 440 mm - Spindle speed up to 8,000 rpm - Spindle power: 12 kW - Tool holder: SK 50 - A-axis up to 600 rpm - Weight approx. 6,500 kg For any questions, please feel free to contact me. Harald Eble Mobile: +49 (0) 162 238 777 4

Condition: excellent (used), Year of construction: 2014, mega Design Solutions UK LTD Use and recommend Haas machines. HAAS TM3P 3AXIS MACHINING CENTER LARGE CAPACITY Outstanding condition very little used Nwsdpsyhhgmsfx Ag Iec complete with 8 BT40 tools as shown Good tooling package Travels X 1016MM Y 508MM Z 406 MM We can help with setup and training if required.

Condition: excellent (used), Year of construction: 2016, HAAS VF-4SS machining center, 4.axis Year: 2016 Description: X Axis 1270 mm Y Axis 508 mm Z Axis 635 mm Spindle Nose to Table max 742 mm Spindle Nose to Table min 107 mm Spindle 22.4 kW Max Speed 12000 rpm Max Torque 122.0 Nm, 2000 rpm Drive System Inline Direct-Drive Taper SK40 Table lenght x width : 1321 x 495 mm T-Slot Width 16 mm Number of Std T-Slots 5 Feedrates Max Cutting 21.2 m/min Rapids 35.6 m/min Njdpfx Aoylmc Isg Ijwc Tool Changer Capacity 40 positions Max Tool Weight 5.4 kg Tool-to-Tool (avg) 1.80 s Chip-to-Chip (avg) 2.40 s Coolant Capacity 208 L Weight 7500 kg Accessories/options: - 4.axis rotary table, HRT310 - through spindle coolant - coolant tank - spiral chip conveyor - 40 positions tool magazine - Losma filtration system - Renishaw TS27 system - lots of tool holders with tools, SK40 type Under power in our warehouse.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Machine: Haas VF-2SS with HRT160 Year of manufacture: 2007 Condition: Used, inspected, fully functional Technical specifications: Spindle: max. 12,000 rpm, 22.4 kW power, standard SK40 taper Travel: X: 762 mm Y: 406 mm Z: 508 mm Table: 914 x 406 mm, T-slots Nwjdpoyg Iixjfx Ag Isc Rotary table: HRT160, 4th axis, integrated for simultaneous machining Tool changer: 24 stations CNC control: Haas Classic Control Coolant system included Special features: HRT160 enables 4-axis machining for complex workpieces Machine can be inspected under power by appointment in Burbach. We provide loading assistance. Buyer is responsible for transport. Technical data, accessories and description of the machine are non-binding.

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Nwsdpfx Agou T Rgqe Isc