Used Hakomatic B 655 S for sale (82,489)

Condition: used, B&R Acopos 1045 servo drive 8V1 removed from Engel robot ERC-6510-E Kwedpeiyzw Eefx Ab Tou - removed from running machine - fully functionalmanufacturer: B&R type: 8V1045 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has a 12-pin green plug.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Ksdpfsp Rb Iaex Ab Tswu Dition: überholt

Condition: used, B&R Acopos 1016 servo drive- removed from Remak RX43 - removed from running machine - Fully functionalmanufacturer: B&R type: 1016 Kwjdpfx Aerr Egajb Tsu manufacturer no.: 8V1 Rev. H0Before purchasing, please check whether the Acopos you require also has an 18-pin grey connector. If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Year of construction: 1988, condition: excellent (used), New entry hydraulic surface grinding machine Z&B Ziersch FS 2045 T Bj.88 Kwsdok Ufz Nopfx Ab Teu grinding area 500 x 200 mm - vertical dividing gear - my-Tipp- feed - electronic handwheel - autom. feed - digitalaz. automatic cross feed, continuous and intermittent, micro-fine adjustment cross - magnetic plate with demagnetization hydr. overhead puller - adjustable feet - machine checked through - all functions there - runs very nice ! Pricing; ex stock - subject to prior sale and error.

Year of construction: 2004, condition: excellent (used), conveyor belt Trayband 4100x380 mm Kwedpein Nn Iofx Ab Tju price: 1.750 Euro year: 2004 contact: Mr. Rainer Eckerle

Condition: good (used), functionality: fully functional, 8LSA44.E3030D000-0 IN 2,8A - MN 4,6NM - NN3000MIN' - IP64 - I0 3,7A M0 6,0NM - UN400Vac Serial number: 75480235523 Ksdpfxoufxvke Ab Tswu

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 7,120 mm, total width: 1,020 mm, total height: 800 mm, TAF article number: 1000003853 Manufacturer: S-Serv Kwedpfer D Ntqox Ab Tou Year of construction: 2018 Overall dimensions: approx. 7,120 x 1,020 x 800 - 1,100 mm Width incl. side panel: 900 mm Side panel height: 90 mm Width incl. drive: 1,020 mm Conveyor length: 7,070 mm Conveyor width: 800 mm Belt type: PVC, smooth Belt width: 800 mm Substructure: incl. supports H: 800 to 1,100 mm Drive: Head drive Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 230-400 volts Conveying speed: 0.1 m/s, constant Special features: incl. side guide, H: 40 mm Condition: Used / fully functional Function test: OK

Condition: used, 1x FVE 90/0160 1100x300H B=200 8D 7x FVE 350/0500 1400x400H B=500 20D 1x FVE 260/0500 1600x400H B=500 20D 1x FVE 1120/0850 2900x650H B=850 Vibrator Type 1000 1x FVE 175/0400 1200x350H B=400 8D Kwsdowu Tdxepfx Ab Teu 1x FVE 280/0500 1400x400H B=500 20D 1x FVE 280/0500 1400x400H B=500 20D

Year of construction: 2024, condition: new, max. cutting height - ø 340 mm min./max. cutting width 80 - 250 mm min./max. side board 18 - 80 mm max. cutting length 6.000 mm feed rate 5 - 30 m/min. sawing motor 2 x 55 kW feed motor 4,0 kW width adjustment motor 0,55 kW infeed roller motor 0,75 kW weight 8,000 Optional equipment Laser adjustment Infeed table extension up to 8.000 mm Automatic width adjustment with 6 fixed dimensions Equipment with 1.000 mm dia. blades Kedpfju Izkjx Ab Towu Motorized log turning device Electronic braking device

Condition: new, machine/vehicle number: S-CL-250-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 250 m³/h, total height: 600 mm, total length: 340 mm, total width: 430 mm, overall weight: 35 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 Kjdpfjvrylfsx Ab Tewu - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: new, machine/vehicle number: S-CL-100-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 134 m³/h, total height: 475 mm, total length: 250 mm, total width: 250 mm, overall weight: 17 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Kwjdpfx Aowpu Twob Tju Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Condition: used, Year of construction: 1997, Year of manufacture: 1997 Condition: functional Ksdpfx Aeww Iaysb Tewu Configuration: loader drying tunnel unloader Specifications: sheet size: 1020x1420 mm machine speed: 5,000 sheets/hour feeding with double-sheet control powdering unit external varnish tank (one in the machine, one extra) varnishing unit with layer thickness adjustment stacking unloader

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Kwsdpfx Aowgk Rasb Tju

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,596 h, load capacity: 8,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,965 mm, drive type: Diesel, Sideloader ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Good Kodpfx Ajv Ntwisb Tswu

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Equipment: dust extraction, This is a dedusting system with an explosion certificate for hemp dust. The system is installed and the price includes all parts. Kwodpfx Asxpm Ausb Tsu

Condition: good (used), Year of construction: 2015, machine/vehicle number: AS4002/10, functionality: fully functional, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Kwsdsu S E Umopfx Ab Tsu

Condition: used, machine/vehicle number: 008339, Max. panel width: 3800 mm Kedpfx Abox Nm S Ss Towu Max. panel length: 1600 mm Main saw blade projection: 95 mm No of Grippers: 6

Condition: used, Year of construction: 1999, turning diameter max. 900 mm turning length max. 2.000 mm control MSD 501 II turning diameter over bed 994 mm turning diameter over cross slideways 733 mm standard turning dia. 374 mm centre distance 2.300 mm turning speed range - main spindle 3 - 1.500 min/-1 power capacity - main spindel 43 / 37 kW Number of speed ranges 3 spindle bore 185 mm chucking diameter 500 + 500 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 65 mm x-axis 485 (450 + 35) mm z-axis 2.150 mm tailstock 2.100 mm diameter of quill 150 mm quill stroke 150 mm rapid traverse X: 20 / Z: 20 m/min Tipp feed 0 - 1.260 mm/min total power requirement 65 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 8,0 x 4,0 x 3,2 m CNC - Lathe MORI SEIKI - SL 600 B / 2000 CNC lathe with front and rear chucks and high drive power for pipe machining Features: - Pneumatic front chuck 500 mm with 205 mm bore - Pneumatic rear chuck 500 mm with 205 mm bore Control Options: - Variable thread pitch - Program memory expansion - Tool correction expansion Kjdpsylzv Nsfx Ab Tjwu

Condition: used, mileage: 90,000 km, power: 88 kW (119.65 HP), first registration: 05/2016, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system: Radio CD 18 BT (Radio/CD, USB port, Bluetooth), spare wheel with road tyres, seat configuration: bench seat omitted Additional equipment: Driver's airbag, exterior mirrors electrically adjustable and heated, on-board computer, brake assist, tachometer, electronic differential lock, rear wing doors without windows (opening angle 180 degrees), body/construction: standard panel van, cab: standard cab, body length: L1, roof height: standard roof (H1), fuel tank: 80 litres, adjustable steering column (steering wheel), engine: 1.6 litre - 88 kW biturbo CDTI, radio remote control on steering wheel, wheelbase: 3,098 mm, low-emission according to Euro 5 emissions standard, steel wheels 6.5x16, start/stop system, variable load securing rails (FlexFix system), heat-insulating glazing, permissible total weight 2.7 t Vehicle shows signs of wear visually, technically in very good condition! Ksdpoyk Szmsfx Ab Tswu Financing available

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kedsvvkipopfx Ab Towu

Condition: used, Mechanical pull-down NC machine vice FRIBOSA type size B Precision machine vice, grinding vice, clamp Jaw width 100 mm Jaw height 34 mm Clamping width 0 to 130 mm guideway height 40 mm guideway length 270 mm - mechanical machine vice - Clamping range via trapezoidal spindle - Stable base body ground on all sides - Can be clamped horizontally, vertically or laterally Dimension L x W x H 310 x 100 x 77 mm weight: 10 kg Kedpfx Ajilx Ufjb Tswu good condition

Condition: new, bore capacity in steel (diameter) 28,0 mm threading 12 M bore stroke 130 mm throat 250 mm table: 375 x 375 mm morse taper 3 MK turning speeds 75 - 3.200 U/min total power requirement 1,1 / 1,5 kW weight of the machine ca. 215 kg. range L-W-H 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector Kwsdpfx Abjxaa T Is Tsu - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm Kwodowc U Izepfx Ab Tsu material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Kwodpfxoq Abnns Ab Tou Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 205 mm Swing diameter in gap: 560 mm Spindle bore: 51 mm Bed width: 290 mm Speed range: 46 - 1750 rpm Feeds & threads: yes Quill stroke: 170 mm Quill diameter: 52 mm Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 1850 x 900 x 1380 mm Weight: approx. 1,400 kg Kwsdpfoykkbrsx Ab Tou Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw scroll chuck, Ø 200 mm • Gap bed • Steady rest • 4-position quick-change toolpost • Bed stop • Coolant system • Hinged chuck guard • Lighting The machine comes from a training workshop and is in a very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany