Used Hand Punch for sale (9,448)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Maximum diameter for material thickness 32 mm x 10 mm Nwjdpfoz N Al Dox Ai Aen Throat 510 mm Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Machine weight 1.4 tons Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: excellent (used), Year of construction: 2016, AIDA Press DSF-M2-6300(D1)-305-150 Servo drive Year of manufacture 2016 Press force 6,300 kN Stroke rate 1-50 (75) 1/min Stroke 350 mm Installation height 800 mm Ram adjustment 300 mm Table area 3,050 x 1,500 mm Ram area 3,050 x 1,500 mm Nwodpfe Afzplex Ai Ajn Coil strip feeding system Strip width 100-800 mm Strip thickness 0.6-6.0 mm Coil capacity 5,000 kg

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 tons Stroke rate: 400 strokes/min Material and feed data Sheet width: 180 mm Strip width: 180 mm Neds Aa Nhlepfx Ai Ajwn Feed length: 150 mm Stroke data Stroke: 10–80 mm Control and electrical system Control: KAISER Voltage: 380 V Dimensions Space requirement: approx. 1.85 × 2.70 × 3.00 m EQUIPMENT Original KAISER strip feed, model ZR 18 D

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Speed: 30–400 rpm Drive power: 18 kW Ram adjustment: 0–50 mm Table dimensions: approx. 740 mm (?) Feeder Feed length: 160 mm Material width: 160 mm Nwodpfxs Adzq He Ai Aen Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 25 t Stroke: 8–60 mm Stroke rate: 100–500 1/min Flywheel diameter: 125 mm Table dimensions: 470 × 450 mm Table slots: 4 MACHINE DETAILS Nwjdpj Ad Ilwefx Ai Aon Manufacturer: Schaal Type: SEP25 Machine number: 703 Year of manufacture: 1983 Drive power: 2.9 kW Dimensions (L × W × H): 1,500 × 1,200 × 2,000 mm Weight: 3,000 kg

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. Nsdpfx Aoz Dtbwei Ajwn This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Nodpfez S T Insx Ai Aswn Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Schaal Machine type: Punching machine PRESS DATA Press force: 100 kN Table dimensions: 380 × 160 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,900 mm Weight: 5,000 kg Nwedpfs Ad D Hdjx Ai Aen EQUIPMENT Loadgard press force indicator Feed system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching performance Press force: 30 t Table Table dimensions: 480 × 400 mm Feed Straight feed: available MACHINE DETAILS Condition Machine: refurbished Dimensions and weight Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg Nwjdpfx Aio Adu I Ej Aen EQUIPMENT Straight feed

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Nwodpfxe Adunre Ai Asn Table dimensions Length: 480 mm Width: 400 mm MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Nedpfe Afwubex Ai Aswn Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching force: 18 t Table dimensions: 360 × 310 mm Stroke length: 20–100 mm Ram stroke: 6–36 mm Nweds Adufkspfx Ai Aen Stroke rate: 100–600 min⁻¹ MACHINE DETAILS Dimensions (L × W × H): 850 × 800 × 1,500 mm Weight: 500 kg EQUIPMENT Siemens Simatic OP3

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray Nwjds Afv Szspfx Ai Aon ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Nedpfx Aie Aduyzs Aewn Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Nedpfx Aijz Dumze Ajwn

Year of construction: 1998, condition: used, functionality: fully functional, Automatic die cutter for paper and carton converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is equipped with an automatic waste stripping station and a pile delivery with manual non-stop rack and front waste removal device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping station. Equipment ###Machine Platform with safety barrier Machine elevated by 415 mm, including platform elevation Centerline system for off-press tool preparation, quick registration, and fast setting of adjustable elements Electrical cabinet with air conditioner Light beam indicator for machine state Sheet passage control unit with infrared cells 4 auxiliary control panels C.U.B.E. centralized microprocessor control unit with LCD display and keyboard for sheet counting, cutting force with adjustable overload limiter, speed setting, and synoptic status display Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at stripping station Three-phase asynchronous main motor with frequency converter control ###Feeder Floating pallet tray with manual handle for lateral adjustment during production Suction unit with multiple adjustments Pile height control with front photocell Side blowers laterally adjustable with Centerline marks Automatic vertical compensation of the suction head Manual non-stop device Sheet synchronization device adjustable during operation ###Feed Table Anti-static stainless steel plate Upper transport for paper, carton, and corrugated board up to 4 mm Upper frame with manual lifting device 4 fixed position lower feed belts 4 paired adjustable front lays Pull guide (OS) adjustable with Centerline marks Sheet presence control and double sheet detector Sheet synchronization device with manual adjustment, machine stopped ###Platen Press 3x upper chase with quick locking, fixed bottom plate Lower ground steel cutting plate, 5 mm Lower supporting plate of synthetic material, 22.5 mm Device for die-cutting without gripper margin Gripper bar reopening device Compensation plate, 4 mm ground steel Adjustable centerings for the lower supporting plate, ±0.9 mm ###Waste Stripping Station 2x upper pull-out frame 2x lower pull-out frame Central quick lock pull-out frame ###Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,400 mm (non-stop 1,100 mm), delivery 1,120 mm Max Pallet Size: 1,200 x 800 mm ###Compressed Air min. 6 bar; without a central supply, a compressor of 7.5 m³/h with a 110 l tank is required ###Net Weight 15,000 kg ###Electricity Main motor 11 kW, total connected load max. 25 kVA Nedpfx Ais Afvrus Aewn Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Nwsdpfxs Adu Hbo Ai Aen Pressing force: 30 t WORK TABLE Table dimensions: 480 × 400 mm MACHINE DETAILS Dimensions (L × W × H): 1,100 × 800 × 2,000 mm Weight: 3,000 kg Condition: Refurbished EQUIPMENT Feed control

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany. Nsdpfx Ajzlgf Iei Ajwn

Condition: used, Year of construction: 2022, Technical condition: fully functional and immediately ready for use. An inspection and a test run of the machine on-site can be arranged. If you are interested, please contact us. We can provide additional photos, a video of the machine in operation, and further technical information. Serial number: 22-05-14-028 Country of manufacture: Germany Power supply: 400 V / 50 Hz Rated current: 6.80 A Apparent power according to the nameplate: 3.459 kVA CE marking: Yes GS/DGUV certification: Yes Wood dust tested: Yes Nodjz Iv Uujpfx Ai Ajwn Sawing unit Minimum saw blade diameter: Ø 300 mm Maximum saw blade diameter: Ø 500 mm Speed range: 2,000–6,000 rpm Adjustable cutting height ALTENDORF HAND GUARD safety system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Haulick + Roos Type: HPV28EP Machine number: 110 Machine type: Punching machine PERFORMANCE DATA Punching force: approx. 28 t Rated current: 6.7 A WORK TABLE Table dimensions: 600 × 340 mm Number of slots: 3 MACHINE DETAILS ELECTRICAL DATA Operating voltage: 380 V Nsdpfxj Advcqj Ai Ajwn Control voltage: 220 V DIMENSIONS AND WEIGHT Length: 1,100 mm Width: 600 mm Height: 2,000 mm Weight: 2,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Stamping force: 40 t MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 40 Machine type: Stamping press Njdpfxs Ad H Uqo Ai Aewn Length: 2,000 mm Width: 1,000 mm Height: 2,400 mm Weight: 3,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Nwodpfo Adugnsx Ai Aen Loading: December 1st to December 10th. TECHNICAL DETAILS Press Type: V32 MACHINE DETAILS Manufacturer: Kaiser Machine type: Punching machine Dimensions Length: 3,000 mm Width: 2,000 mm Height: 2,700 mm Weight: 3,000 kg EQUIPMENT Feeder

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: HIW1000/610-201, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, quick-change device, For sale is an extremely powerful and versatile hydraulic universal punching and shearing system from the German premium manufacturer Mubea (Muhr und Bender), model HIW 1000/610. This dual-cylinder machine allows for independent operation at the stations and offers a tremendous punching force of 100 tons (1000 kN) with an extra-deep throat depth of 610 mm. The system is CE-certified, manufactured in 1997, and is ideally designed for heavy-duty applications in steel construction, metalworking, and industrial manufacturing. Technical data: • Manufacturer: Mubea (Muhr und Bender) • Model / Type: HIW 1000/610 • Machine No.: HIW1000/610-201 • Year of manufacture: 1997 • Connection voltage: 400 V / 50 Hz (3 phases) • Control voltage: 24 V • Punching force: max. 1000 kN (100 tons) • Throat depth: 610 mm • Machine weight: 3,150 kg • CE marking: Present Performance data & capacities (for material with 450 N/mm² tensile strength) • Flat steel shear: • max. 600 x 15 mm Nodps Adzcijfx Ai Aown • max. 400 x 20 mm • Profile steel shear (C- and I-profiles / flanges): • S = 13 mm • B = 60 mm • T = 90 mm • Angle shear: • 90°: max. 160 x 16 mm • 45°: max. 70 x 7 mm • Bar steel shear: • Square bar (☐): max. 50 mm • Round bar (◯): max. 50 mm • Hole punch: • max. Ø 40 mm in 22 mm material thickness Includes a large amount of accessories and a length stop.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 unit of Flexor 380 2C, used, factory-reconditioned Machine speed max. 300 m/min Web width max. 380 mm Web width min. 190 mm Unwind diameter max. 800 mm Unwind shaft, pneumatic, D 76 mm Punching unit with re-register – 2 units Punching width max. 380 mm Magnetic cylinder, circumference min. 10” (80T) Magnetic cylinder, circumference max. 24” (192T) Matrix strip unwinding, max. D 600 mm Slitting unit with 7 blade holders 1 Rewinder, max. D 550 mm Spindle, D 76 mm Year of manufacture 2015 Nwsdpfx Aiez Sriqo Ajn Accessories (optional): Used magnetic cylinders: 80, 87, 92, 94, 95, 98, 96, 100, 102, 104, 106, 112, 116, 120, 132, 136, 138

Condition: used, total length: 2,100 mm, total width: 1,000 mm, total height: 2,450 mm, Colour: White Empty weight: 4.600 kg Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg Nwsdpe Aatr Uofx Ai Ajn - Year: 1 - Documentation available: Yes - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Notching width [mm]: 200 - Shearing width [mm]: 500 - Max. plate thickness shearing [mm]: 2.5 - Options: Length stop - Transport dimensions: 2100mm x 1000mm x 2450mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum