Used Hand Punch for sale (9,273)

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Fpodow Sxyrjpfx Al Ujn

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Fpjdpsyz Ap Rofx Al Usn

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA35-150 1GN2 N05 Fpjdpfxev Rlvtj Al Ujn -Projection: 150 mm -Dimensions: 270/70/H130 mm -Weight: 8.6 kg

Year of construction: 2026, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. Fedoki Tqcopfx Al Ujpn • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears Fedjiachkjpfx Al Uspn -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 5 -Steel sheet: up to 5 mm -Round steel: up to 13 mm -Overall dimensions: 500/150/H1025 mm -Transport dimensions: 850/150/H370 mm -Weight: 22 kg

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw Fjdpfet Hmivjx Al Uopn -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump Fpjdpfjwwq Exsx Al Ujn -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos Fodpev Eakbefx Al Uopn -Dimensions: 580/170/H600 mm -Weight: 76 kg

Year of construction: 1994, condition: good (used), Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin -Dimensions: 460/440/H140 mm Fpodpjyzfkdjfx Al Usn -Weight: 6.4 kg

Condition: used, mileage: 337,603 km, power: 78 kW (106.05 HP), first registration: 04/2014, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,401 mm, total width: 1,996 mm, total height: 2,260 mm, Year of construction: 2013, Equipment: ABS, central locking, soot filter, Iveco Daily 29L11 KaWa, 1 owner, Iveco service manual, last service 03/2025, Power steering, cruise control, 6-speed gearbox, Pioneer radio, airbag, load compartment with chequer plate floor and side wall, trailer hitch, Fjdpezhdzrofx Al Uepn etc. Viewings and test drives by appointment only via telephone The information provided online is non-binding and for descriptive purposes only. They do not represent guaranteed features. The seller is not liable for typing or data transmission errors. Subject to prior sale and changes.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Fsdoziaayepfx Al Uspn Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: used, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 04/2010, next inspection (TÜV): 09/2026, loading space length: 3,250 mm, loading space width: 1,800 mm, loading space height: 2,000 mm, Böckmann tandem axle trailer, 2,700 kg. Aluminum side walls with cover. Fedpezhqvpofx Al Uopn Galvanized frame, lashing points, Böckmann axles, V-shaped drawbar, support wheel, side walls that can be opened on all four sides, inertia brake, excellent floor condition. =====German registration + 1 previous owner=====Detailed view // Detailed walkaround: ?v=aNIDeogK84c =Daily purchase of commercial vehicles, trade-ins possible= Price: 2,700 EUR net.

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. Fpedpfx Aljzmx Scj Uon A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg Fodsyzmvhjpfx Al Uopn

Condition: used, mileage: 254,290 km, power: 103 kW (140.04 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M451----VW CRAFTER 2.0 TDI EURO 6----1ST OWNER----254,290 KM, SERVICE HISTORY AVAILABLE----* START / STOP * HILL START ASSIST * CROSS WIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ----M+S TIRES ON STEEL RIMS----HEATED FRONT WINDSHIELD----AUXILIARY HEATER----8 SEATS----DIGITAL TACHOGRAPH----TOW HITCH WITH INTEGRATED STEP PERMISSIBLE TRAILER LOAD UP TO MAX. 3000 KG ----ERGO COMFORT SUSPENSION SEAT, DRIVER SIDE COMFORT PASSENGER SEAT----SLIDING WINDOW ON DRIVER'S SIDE ----* NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE SYSTEM * SD CARD * USB * APPLE CARPLAY * ANDROID AUTO * MULTI-CD CHANGER * PASSENGER SIDE/DRIVER SIDE ARMREST + LUMBAR SUPPORT * ELECTRIC WINDOW LIFTS * ELECTRIC SIDE MIRRORS+HEATED * ADJUSTABLE SEATS IN THE CARGO AREA * 180° REAR DOORS * ONBOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * 2 X 12V SOCKET * STORAGE COMPARTMENT IN THE CAB * LED LIGHTING DRIVER+CARGO AREA ----Special equipment: * Stowage Package 2 * Airbag driver/passenger side * Passenger airbag can be deactivated * Audio-navigation system Discover Media (touchscreen color display) * Exterior mirror electrically adjustable and heated * Driving assistance system: fatigue detection sensor * Tachograph digital * Suspension: dampers and stabilizers reinforced front and rear * Window in the cargo/passenger compartment: - sliding front left * Window package * Vehicle without cargo area bulkhead * Vehicle without model designation * Speed control system (cruise control) incl. speed limiter * Marker lights on the side * Tire pressure monitoring system * Spare wheel in driving condition including onboard tools and jack * Side airbag / head airbag (curtain airbag) in front * Seat cover / upholstery: synthetic leather * Seats in the cab: passenger seat comfort * Seats in the cab: suspension seat ErgoComfort * Driver side (seat adjustment 20-way) * Front bumper in gray * Step rear right * Interior trim in the cargo/passenger compartment: plastic semi-high * Heat exchanger additional * Auxiliary heater * Additional heater (air) Further equipment: * Exterior mirror convex left and right * Turn signal lights LED integrated in exterior mirror * Floor covering in the cab: rubber * Aerodynamic underbody panel * Double headlights * Two-tone horn * Entry handle on rear pillar rear left and right * Hill start assist * Brake assist (HBA) * Cross wind assist * Window lift electric front * Grab handles A-pillars * Interior lights in the cab: LED * Interior lights in the cargo/passenger compartment: LED * Body/Structure: box van * Body variant: normal roof * Fuel tank: 75 l * Radiator grille with chrome strip above * Steering column (steering wheel) adjustable * Headlight range adjustment * Truck registration * Engine 2.0 l - 103 kW TDI * Rear fog lamp * Wheelbase 3640 mm * Tire repair kit * Low emission according to exhaust standard Euro 6 * Sliding door cargo/passenger compartment right * SCR system (AdBlue technology) * Power steering electro-mechanical * Start/stop system engine * Sockets (12V connection) in the cab (2 pieces) * Lashing points cargo area * Warning system for seat belt (driver side) * Heat protection glazing * Central locking with remote control and interior operation * Permissible total weight 3.50 t AN UPGRADE TO A 3.5T TRAILER LOAD CAN BE OPTIONALLY PERFORMED FOR AN ADDITIONAL CHARGE ----++ Exclusive promotion at Autohaus Mat GmbH: Up to €1,000 trade-in value Fpjdpfx Aley N Ikvs Ujn

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die cutting punch: Punch and die Ø 45 mm -Transport dimensions: Ø 90 x 80 mm Fpsdpfjzr Ek Asx Al Uon -Weight: 2.2 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Gill tool, notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm Fjdpfx Alezr Hlze Uepn -Weight: 33.9 kg

Condition: used, mileage: 206,877 km, power: 110 kW (149.56 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 1,815 kg, maximum load weight: 1,125 kg, overall weight: 2,940 kg, axle configuration: 4x2, wheelbase: 3,200 mm, brakes: other, color: silver, driver cabin: other, gearing type: automatic, emission class: euro4, number of seats: 8, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, trailer coupling, * German vehicle * First owner * Condition: see photos * Long wheelbase version * 8 seats * 2x air conditioning, front and rear * Becker navigation system * All seats with armrests * Longitudinal adjustable bench seats * Opening windows * Tinted windows * Rear doors with 180° opening angle * Top Load package * Tow hitch * Towing capacity 2,000 kg * 2x heated seats * Cruise control * Electric windows * Electrically adjustable and folding mirrors * Adjustable steering wheel * Central locking with remote control * Rear window wiper * Spare wheel holder + spare wheel Fodpfxozu Take Al Ujpn * ASR/ABS * Park Distance Control, front and rear * Wheelbase 3,200 mm * Gross vehicle weight (GVW) 2,940 kg * Unladen weight 1,815 kg * Payload 1,125 kg If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV assessment, a new SP (safety report), or a new UVV (accident prevention regulation). You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that no false impressions about the condition and suitability arise for the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Fjdpoznu Ayofx Al Uepn -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Condition: used, mileage: 206,245 km, power: 140 kW (190.35 HP), first registration: 10/2017, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 01/2028, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, No. 98 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Mercedes-Benz Vito 119 cdi 4x4 / 4 Matic Mixto Compact in very good condition. The all-wheel drive system, combined with the 190 hp engine, provides a real driving experience. The list of extras is impressive. The vehicle comes from a single owner and has a fully documented service history, with a recent oil and filter change. A very tasteful combination of obsidian black metallic paint, 17-inch alloy wheels, LED headlights, and the chrome package with chrome elements on the front apron.----The service was carried out at 33,000 km, 59,000 km, 88,000 km, 125,000 km, 158,000 km, 206,240 km (09/2026).----The numerous extras include, among other things, 4x4 all-wheel drive, LED Intelligent Light System headlights, electric sliding door, 7G-Tronic automatic transmission, 17-inch alloy wheels with all-season tires, chrome package, driving assistance package, Comfort Mixto package, blind spot assistant, lane-keeping assistant, active parking assist, rear view camera, roof rails, folding rear seats, parking assist, air conditioning, leather steering wheel, adjustable multi-function steering wheel, navigation system, socket (12V connection) in the cargo/passenger compartment, comfort lighting in the passenger/cargo area, head airbag system (windowbag), head-shoulder airbag (thoraxbag) driver/passenger side, fuel tank: enlarged, chrome radiator grille, rain and light sensor, exterior mirrors electrically foldable, adjustable and heated, driver and passenger seat comfort, seat heating and lumbar support, 3-seater bench comfort, two-way speakers, fuel tank: enlarged, comfort package 2, high-quality interior trim, storage net on the front seat backrest left and right, center console with storage compartment, increased gross vehicle weight to 3.05 tons, cruise control, (...).----Permissible total weight: 3050 kg Unladen weight: approx. 2100 kg Payload: approx. 950 kg Fpedpfxezyxq Ss Al Ujn Towing capacity: 2000 kg Emission standard: EURO 6b Wheelbase: 3200 mm VIN: WDF44770113370828 Warranty available for an extra charge 2 keys ----Errors, changes and prior sale reserved----Special equipment: Storage net on the front seat backrest left, storage net on the front seat backrest right, armrests in the passenger compartment, exterior mirrors electrically adjustable and heated, both sides, chrome package, roof rails, automatic switching on of headlights, grab handle rear, driving assistance package, window for rear doors / tailgate with wiper / washer system, cup holders front (double), grab handles A-pillars, urea tank (AdBlue): 25 liters, rear door without glazing (opening angle 180 degrees), Intelligent Light System LED, child safety lock, comfort package 2, cockpit standard, high-quality interior trim, floor covering: passenger compartment TPO, grab handles in the rear, headliner, socket (12V connection) in the cargo/passenger compartment, comfort lighting in the passenger/cargo area, head airbag system (windowbag), head-shoulder airbag (thoraxbag) driver/passenger side, fuel tank: enlarged, chrome radiator grille, steering wheel (steering column mechanically adjustable), light alloy wheels 7x17 (20-spoke), metallic paint, center console with storage compartment, navigation system Becker MAP Pilot, parking package, driving assistance system: active parking assist, PTC heater, sliding door right electrically, rail system for load securing, seats in the driver's cab: passenger seat heated

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 3.73 kW (5.07 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 35 t, operating speed: 5 mm/s, table width: 510 mm, table length: 1,000 mm, total length: 1,690 mm, total width: 1,490 mm, total height: 1,870 mm, overall weight: 1,750 kg, Hydraulic punching machine with 5 stops and Trumpf-type tooling. Fedpfjzt Ih Hox Al Ujpn

Condition: excellent (used), Year of construction: 2009, Punching machine Boschert EL500 Quick tool change system TRUMPF up to tool size III = diameter 105 mm Fpedpeid I Hhsfx Al Uon Punching force: 280 kN (28 tons) Punching arm overhang 560 mm Side stop 1000 mm right/left Stroke 40 mm Total weight 2700 kg including tool cabinet with tools and accessories completely overhauled

Condition: used, mileage: 677,250 km, power: 210 kW (285.52 HP), first registration: 11/2012, fuel type: diesel, number of seats: 25, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, * Our internal reference: 1186 * O 530 K Citaro - Facelift * First registered: 11/2012 -> Model year 2013 * 1st owner in Germany * Inspection book available! * We are still awaiting service records * 210 kW - EURO 5 / EEV * ZF automatic transmission * Retarder Fpedpoy Evg Dsfx Al Usn * Lifting/lowering/kneeling function * ABS, ASR * 60 standing places * Plus additional folding seat at the pram space * 1 x wheelchair space * LED destination display with control unit * Interior pre-wiring for TFT monitor * Radio * TILT WINDOWS * AIR CONDITIONING * Auxiliary heater * Manual folding ramp * Note: * The buyer is responsible for independently inspecting the condition and equipment of the vehicle/goods! * All information given without liability * Subject to prior sale * Please refer to our terms and conditions

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ Fpedpfx Aezu Avbjl Usn • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, fork length: 2,500 mm, empty load weight: 156 kg, drive type: Handbetrieb, Hand truck Condition: Ready for use and fully functional Technical condition: very good Rear tire type: solid tires Fpjdpfszt Ua Nsx Al Ujn