Used Hartmetal Inserts for sale (1,999)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pitney Bowes Relay 5000” enveloping machine Item for sale: 1 x Pitney Bowes Relay 5000 Meter readings: Total: Approx. 226,280 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Tsdpfx Afsz Ixf Nogsd Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Donaldson Torit DCE ventilation filter, insert filter Type: DLMV8/7S Includes 12 filter racks, each 1 meter long See our other advertisements VMA Wekerom Todpfx Asxc Iyuefgjd

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Tsdpfxj Afznuo Afgjd Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, Kuvertiermaschine / Enveleope Inserter machine Neopost DS-63 Kuvertiermaschine / Enveleope Inserter machine - Neopost DS-63 Serial-No. 13FN1525 Zuführungen Dokumente 2 Taktleistung max. 2200 Briefe/h Anlagekapazität A4 650 Anlagekapazität Kuverts 150 Papierformat / Paper Size A4 - A5 - A6 Höhe / High 90 - 356mm Breite / Width 130 - 230mm Papierqualität 60 - 170g/m2 Papierstärke 250 g/m2 Umschlagformate / Envelope Sizes DIN-Fomrate C5 - C6 - DL Höhe / High 90   - 162mm Tjdpfeyzn Ewox Afgod Breite / Width 160 - 248mm Kuvertqualität / Enveleope Quality 80   - 120g/m² Füllgutdicke / Envelope thickness max. 2.5mm Maschinen Stellfläche / Machine Size 1200 x 420 x 520mm Gewicht / Weight 75kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch Tedpjzktq Isfx Afged GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Todpfx Afsy Ull Uogjd

Year of construction: 2019, condition: used, functionality: fully functional, This is a combination steamer CM 101 from the premium manufacturer Rational, in an electric version. This combination steamer is equipped with a rack with 8 insertion points, allowing you to use deeper containers for a larger quantity per insertion point. This combination steamer was mainly used for reheating food and is therefore in good used condition. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. The recommended retail price (RRP) is: €9,380 net. You will receive an invoice with VAT shown. These are sample photos; originals will follow shortly. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Checked & fully functional - or money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport W x H: 845 x 1050 mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 8 x 1/1 GN Weight: approx. 132 kg Serial number: E11MI19112793744 Year of manufacture: 2019 Condition: used, inspected, fully functional Additional information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings food that has been prepared and cooled to the optimal point to serving temperature in the ideal climate. Automatic separation of fat for clean cooking chamber air. Manual cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Tsdpfx Aj Afc Ntofgjd Ventilated 2-pane glass (swiveling for easy cleaning). LED cooking chamber lighting. Core temperature measurement using a probe. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld shower with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2008, functionality: fully functional, • BB300-10K envelope module "right" with BSC 2.0 user interface • Feeder system with 6 feeder positions "right" • 4x rotary feeders AT25 (at positions 1–4) • 1x hybrid feeder HF3 (at position 6) • 1x free feeder position with safety guard • long chain guide • 15” panel • Keiper stacking conveyor, 1.5m • Preparation for reading at a maximum of 6 positions • Vacuum sealing section with integrated discharge station • 1x turning conveyor • 1x envelope autoloader • D/V printing/vacuum pump with noise protection - With Müller channel – consisting of: • Module 6798 Autoloader • Module 6686 single-sheet feeder, 26,000 sheets/hour • Module 6896/6815 transfer unit with stop function • Module 6826/6822 second pocket folding unit, 2x top with stop function • Module 6786 collection pocket, standard up to 12” • Module 6730 transport module • Module 6730 transport module • Module 6955 Black Box • Preparation for camera reading Tedpszh Er Eefx Afgsd

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Pitney Bowes Relay 7000” enveloping machine Item for sale: 1 x Pitney Bowes Relay 7000 Tsdpfxoz Iwyro Afged Meter readings: Total: approx. 151,436 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2008, condition: used, functionality: fully functional, Haeger insert molding machine 824WT-3H, manufactured in 2008, with a feeder hopper. In the summer of 2025, the upper and lower tool sets were replaced with a retrofit kit TIS-2 to TIS3, performed by the manufacturer. In July 2026, the touch screen PC was completely overhauled and equipped with a new flash card. The machine is in operation and can be inspected. Sale is without warranty or return, payment in advance required. Machine is available upon agreement in 2026. Tedpfxjyq Nxis Afgod

Condition: excellent (used), Year of construction: 2018, I sell the multiple drilling machine with inserting Vitap Blitz Year: 2018 Number of drilling spindles 1 Number of inserting heads 1 Glue spraying with pump Tsdpfewg Tyqox Afgjd Programming CNC-driven X-axis Very good condition. Available immediately

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Tsdpfx Aszgd Enofgsd Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, end mills with internal cooling, indexable insert end mills, boring heads -Manufacturer: Amec, adjustable indexable insert drill Revolution Drill with internal cooling Tsdpsz Imzlsfx Afgod -Type: V Maxx R44x35-40M -Shaft diameter: 40 mm -Drill diameter range (D1): 66.0 mm to 71.1 mm (adjustable via cartridges) -Drilling depth: 3.5 x D / Usable length approx. 253 mm -Reversible inserts: not included -Dimensions: Ø 63 x 355 mm -Weight: 5.0 kg

Condition: new, 10 pcs. cutting inserts/blades from Allied Machine & Engineering Wohlhaupter 211021-34 3 Series T-A Diameter 45 mm C1 Carbide AM200 for drilling Todpfoz Hbx Nox Afgsd

Condition: used, Spiraleindrehmaschine - Spiral insertion machine Renz DPST Todpo Af Aitjfx Afged Year 1979 - Serial-No. 4015 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Log feeder with limit switches and motor. Length 6.30 m, width 1.70 m, height 1.15 m, weight under 5 t. Ex works price: 6,000 EUR. Tedpfsxdckqex Afgsd

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately Tsdofyn Tyspfx Afgsd

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: workshop-inspected Fittings drilling head Drilling unit: 3/4 spindles Tsdpfezk Nu Asx Afgsd Clamping cylinders: 2 Motor power: 0.8 kW Connection: 400/50 volts / Hz Machine dimensions Length 950 mm Width 650 mm Height 700 mm Weight: 80 kg Availability: at short notice Location: Röllbach

Condition: used, machine/vehicle number: 2907000, Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530Serial-No. 10EY5510 Online-Video-Inspection by Skype-Video Todomkninepfx Afged We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 6671C/6975C/6822C/6989D/6815C, warranty duration: 6 months, year of last overhaul: 2024, Müller online channel for connection to an inserting machine - collect, fold A4 single sheets - Condition: completely overhauled with guarantee (6 months) Consisting of: - 1 x 6798 Autoloader (S/N: 64580) - 1 x 6686D-30K Feeder single sheet vacuum (P/N: 67159) - 1 x 6995 transfer unit incl. 6815 reading unit with large reading area (P/N: 69016) - 1 x 6671C Collecting tray straight ahead 11"-12" (P/N: 69695) - 1 x 6975C Distance module for RU100 (P/N: 69215) - 1 x 6822C Double folding machine upwards (P/N: 69755) - 1 x 6989D Transfer unit (P/N: 69086) - 1 x 6815C STOP function for transfer unit with blower (P/N: 69208) +++Refurbished appliance with 6 months warranty according to our enclosed warranty conditions +++ Todpsvdrx Iofx Afgjd +++Installment purchase and rental possible on request+++

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg Todequ N U Depfx Afgjd 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Tedpfezk N Agjx Afgjd Features and technical specifications: - with 7-spindle row drilling head with positioning pins - Spacing 32 mm - with drilling head for BLUM hinges - with drilling head for Hettich hinges - with the corresponding press-fit dies - Motor 400 V, 0.75 kW, 2800 rpm - with stop bars Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 1990, condition: good (used), I sell the dowel inserting machine Cerisola Savona V3B. Vibrations magazine and inserting head designed for 8mm dowels. Available immediately. Tsdpfogzltnjx Afgsd 220V connection

Condition: excellent (used), Year of construction: 2006, Ref:11128 . 2006 Longford Inserter-Folder Primarily for the production of greetings cards, but can produce other inserted products at high speed. Comprising; Upper C700 Friction pile feeder for insert, top-loading, bottom feeding. Lower C700 Friction pile feeder for main product, top-loading, bottom feeding. Feeders can be configured in either a single or batch feed mode. Easily integrate with OEM equipment. Heavy duty scoring roller shafts. Tedpfx Aozmydaofgjd Robatech IK 40/4 glue control unit. PVA cold gluing system with single head. Longford digital control unit Automatic counter with batch marking Belt folding element Hydraulic variable speed Stream delivery conveyor Including accessories, tools and manuals. Specification: Sheet size, Max: 355 x 254 mm Folds to: 177 x 254 mm Min: 102 x 102 mm Folds to: 38 x 76 mm Stock weight : 100 – 400 gsm2 Belt speed : up to 175m/min.

Condition: excellent (used), Electronic machine, controlled by N.C. Numerical Control PC Windows-based software Workbench width: 1300 mm Can process 4 panels in a single cycle The CNC controls the movement (X-axis) of the horizontal moving unit No. 1 horizontal head with 1 drilling spindle No. 1 dowel insertion nozzle (and glue injector) No. 4 vertical pneumatic pressure cylinders Tedpozyku Nsfx Afgjd Total installed power (kW): 4