Used Heavy Duty Caster Wheels for sale (23,730)

Condition: good (used), Current stock: approx. 400 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Wicke Type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Bsdpjhmuylofx Aaqjdi Total height: approx. 100 mm Rollers Ø: approx. 80 mm roller width: approx. 35 mm Tire material: PA6 plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,556 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), heavy-duty castors, heavy-duty wheels, tires, forklift drive wheels -Manufacturer: Wicke- Topthane heavy-duty wheel -Wheel size: Ø 230 x 90 mm -Bolt circle: Ø 95/13 mm -Price: per piece -Quantity: 2 pieces -Weight: 7.5 kg/piece Bdedjf A Slujpfx Aaqji

Condition: good (used), Current stock: approx. 370 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke material color castor: cream white material color frame: sendz. galvanized Bdsdpfjhmux Isx Aaqsi Technical data: Total height: approx. 150 mm Rollers Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: polyamide plate dim.: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,745 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 53 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 100 mm Rollers Ø: approx. 80 mm roller width: approx. 35 mm Tire material: PA6 plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,370 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately Bedpfx Ashmuxvoaqedi depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 46 pcs. Included in delivery: 01x fixed castor, used Manufacturer: TENTE material color castor: grey material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,57 kg Bdedpfx Ajhmuydjaqji

Condition: good (used), Current stock: approx. 350 pcs. Included in delivery: 01x fixed castor, used material color castor: black Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: solid rubber Material rim: polypropylene Bdodpfohmuyaex Aaqoi plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg

Condition: good (used), Current stock: approx. 140 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Wicke Bjdpfjhmuytex Aaqodi Type: L03 Material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 40 mm Tire material: PA6 plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,837 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 965 pcs. Included in delivery: 01x swivel castor, used Bdsdpfx Aaehmuyzsqsi Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 34 mm Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg General information about the article: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, Bdodswhylvepfx Aaqei 24”/28” Steady.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Bdodpfxjv D Uhfs Aaqei Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, axle configuration: 3 axles, first registration: 01/2009, color: other, Year of construction: 2009, Empty weight: 9.040 kg Bsdpfx Ajw Rfb Hsaqodi Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10mm Axle 3: left 10 mm right 10 mm

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 50, laser power: 20,000 W, pipe diameter (max.): 20 mm, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, power: 20 kW (27.19 HP), total length: 260,000 mm, warranty duration: 60 months, cutting height (max.): 360 mm, working range: 360 mm, HSG TX3R Professional heavy-duty tube laser cutting machine 6000W-20000W Bdjdpfertiinjx Aaqsi Model: TX3R Power: 6000W-20000W X/Y-axis Positioning Accuracy: ±0.05mm/m Cutting Capacity of Round Tube: Φ20-Φ360mm Cutting Capacity of Square Tube: □20*20-□360*360mm Weight of Single Tube: 1200kg

Condition: used, total length: 3,000 mm, total width: 1,210 mm, total height: 450 mm, color: other, Empty weight: 750 kg Steering-wheels back and front Capacity: 10.000kg - Documentation available: No - Transport dimensions: 3000mm x 1210mm x 450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Bdedpswuq Dcsfx Aaqoi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 2009, 2-bay pallet rack, SSI Schäfer, frame height approx. 3.50m to 4m, beam length: 2.80m, - used - : Price (net) ex location: €500 dismantled, packed, and loaded: Manufacturer: SSI Schäfer Model: PR 600 Year of manufacture: 2009 Frame height: approx. 3.50m to 4m Frame width: approx. 9cm Frame bracing: bolted Frame depth: approx. 1.26m Number of frames: approx. 3 pieces Shelf load: 1,040kg Bay load: 3,120kg Bay width: approx. 2.80m Beams: approx. 12 pieces Including depth supports, chipboard panels, Bdedpfx Aextbh Hjaqsi Condition: good Available: from approx. mid-November Location: Egelsbach, Frankfurt area

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: Bedpfjh U Rzgjx Aaqjdi To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Bdodsxddvnepfx Aaqji Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Year of construction: 2010, condition: good (used), Used Stainless steel Goudsmit PM3 Pipemagnet Length 950mm Inlet and outlet 250mm Bdsdpfsir E Hfox Aaqji Maximum capacity 100m3/h

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Bdedpoxt Ib Hsfx Aaqoi

Condition: used, Price: On request Bdjdpfx Aaewniypeqoi - Documentation available: No - Drive system: Conventional - Power [kW]: 8.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 950 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 450 - Table length [mm]: 1300 - Table width [mm]: 300 - Tool holder: ISO40 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 3000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, total length: 4,000 mm, Year of construction: 2024, construction height: 760 mm, drive type: Keine, load capacity: 40,000 kg, tractive force with load: 40,000 N, construction width: 2,200 mm, Heavy duty trailer Condition: New unit Bdedpfx Aasu Dz N Tsqji Technical condition: New Front tires type: Bandages Rear tires type: Bandages Description: All-wheel steering - swing axle - axle rocker

Condition: ready for operation (used), throat depth: 1,100 mm, Heavy duty double column bandsaw sawing cap: dia 1100 mm autofeed with stroke of 500 mm (with unlimited repositioning) enlarged height of sawblade: 67 mm chipconveyor Bdjdpfx Aasxpggaoqji equipped with fully motorized Weisshaupt rollerconveyors: - 6 meter in-feed rollerconveyor (outside) with 1 manual clamp for aligning workpiece - 3 meter in-feed rollerconveyor (inside) with 2 manual clamps for aligning workpiece - max workpiece width: 1100 mm - each roll is motorized - cap of one roll is 4 ton - 2 meter out-feed rollerconveyor - one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 1100 mm Length of band saw: 11400 x 67 x 1,6 mm

Condition: used, functionality: fully functional, empty load weight: 1,850 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 710 mm, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: New Description: All-wheel steering - steering knuckle with adjustable track and steering rods, steering limiting pull at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and Bodpfxsu Dz Rqj Aaqedi

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, total length: 6,020 mm, Year of construction: 2024, construction height: 530 mm, drive type: Keine, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: New unit Technical condition: New Front tires type: Bandages Front tires Size: 425x150x305 Rear tires Type: Bandages Rear tires Size: 425x150x305 Description: All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45° steering stop, drawbar: 1,200 mm with drop guard and height adjustment and Bsdpsu Dz Rkofx Aaqjdi

Condition: new, functionality: fully functional, empty load weight: 2,000 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 610 mm, drive type: Keine, load capacity: 20,000 kg, tractive force with load: 20,000 N, construction width: 2,200 mm, Heavy duty trailer Condition: New unit Technical condition: New Front tires type: Bandages Bedpfou Dz N Hjx Aaqjdi Front tires Size: 450x300x305 Rear tires Type: Bandages Rear tires Size: 450x300x305 Description: All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment as well as All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45° steering stop, drawbar: 1,200 mm with drop guard and height adjustment and

Condition: new, functionality: fully functional, total length: 4,000 mm, Year of construction: 2024, construction height: 540 mm, drive type: Keine, load capacity: 10,000 kg, tractive force with load: 10,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: New unit Technical condition: New Front tires type: Bandages Bdedpfx Aju Dz Rdjaqei Front tires Size: 425x150 Rear tires Type: Bandages Rear tires Size: 425x150 Description: Steering knuckle, double-acting wheel chocks, height-adjustable drawbar with drop guard Steering knuckle, double-acting wheel chocks, height-adjustable drawbar with drop guard