Used Heavy Duty Platform Venture 16 X 3 M Capacity 20 T for sale (122,612)

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 17,100 mm, shelf height: 3,500 mm, shelf length: 5,700 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 3, 3 two-bay pallet racks (M35112711-3) each 5.7 m long, 3.5 m high, 1.1 m deep, each 2 bays, 2.7 m wide, each 3 beam levels, shelf load 3000 kg. - 9 frames (RM3511 - RAL5019) - 18 base plates, shims, screws - 36 floor anchors (ZZBA1210) - 36 individual beams (T2711 - RAL2008) - 3 load plates (BSMcP) Frames bolted, not pre-assembled Gusdpfx Aov Urpzsfteh Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, support length: 3,300 mm, shelf length: 13,700 mm, frame height: 5,000 mm, load per truss pair (max.): 3,250 kg, frame width: 1,100 mm, number of shelf rows: 6, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. Guedpfx Afsv Uq Dkjtjh - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 17,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, load capacity: 9,000 kg, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 2, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, Gujdsv Ungcopfx Afteh each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material Guodpfx Afexmkwwotsh PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) Gedsv Ukz Aopfx Aftouh - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm Gedpfx Ajxmku Njfteuh - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice Gusdoxmkuijpfx Afteh - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45113615-3) 11.2 m long, 4.5 m high, 1.1 m deep, 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. - 4 frames (RM4511 - RAL5019) - 8 base plates, shims, screws - 16 floor anchors (ZZBA1210) - 18 individual beams (T3615 - RAL2008) - 1 load indicator (BSMcP) Frame bolted, not pre-assembled Gusdpfov Urchex Aftoh Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, 2 single-row pallet racks + 3 double-row pallet racks (8 x M45112711-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 4 bays, 2.7 m wide, each with 3 beam levels, shelf load 3050 kg. Guodpfsv Up Aljx Aftjh - 40 frames (RM4511 - RAL5019) - 80 base plates, shims, and screws - 30 spacers/connectors for double rows (ZAbh20) - 160 ground anchors (ZZBA1210) - 192 single crossbeams (T27114 - RAL2008) - 10 collision protection/ram protection (ZRS40901) - 8 load plates (BSMcP) Frames bolted, not pre-assembled Freight/Delivery: - max. 20 working days after receipt of payment - ex works site/installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), Used pallet racking from Jungheinrich (Delta System) is a proven solution for efficient and safe warehouse storage. This heavy-duty racking is ideal for warehouses, industrial, and logistics operations seeking stable and durable racking systems for Euro pallets. The Delta system offers high load capacity, flexible configurations, and reliable performance in everyday operation. Buying used means: tested brand quality at an attractive price – immediately available from stock for new builds, conversions, or expansion of your racking system. Individually adaptable: The uprights (frame type 512 / 612) can be adjusted to your desired height – professionally and precisely in our workshop. We provide custom-fitted racking solutions for all storage requirements. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 2,700 kg - Bay width: 270 cm (3 × EPAL) - Beams: approx. 270 × 13 × 5 cm - Beam colour: Orange - Frame type: 512 / 612, frame blue, galvanised/pre-assembled - Levels: floor + 3 - Pallet spaces: 60 incl. floor spaces - Version: Used Jungheinrich Delta - Availability: Available immediately from stock, multiple sets available SCOPE OF DELIVERY: - 6 × frames approx. 7.50 × 1.05 m, blue, pre-assembled - 30 × beams approx. 270 cm (approx. 270 × 13 × 5 cm) - 60 × safety pins Price: 1,140.00 € net 1,356.60 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany by our partner freight forwarder – shipping costs depending on postal code - Professional installation and dismantling by trained teams optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to provide a non-binding offer tailored to your requirements. Whether new installation, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Visit our showroom! You can get a comprehensive overview of our pallet racks, storage racks, and additional solutions on site. Many systems are assembled and ready for hands-on viewing. Our experts are available to answer your questions and provide individual advice – we look forward to your visit! Still haven’t found the right solution? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. You will find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible. Gsdpfx Aexnywieftjuh

Condition: ready for operation (used), Year of construction: 1997, Immediately available ex stock: CNC heavy-duty lathe Bohringer VDF Godpfexl Rdhjx Aftsuh Model 16 M Year of manufacture: 1997 Sinumerik 840 C Swing over bed: 520 mm Swing over cross slide: 285 mm Turning length: 1,000 mm 2 turrets with 12 stations each Lower turret: 12 stations, 6 driven, 4 kW, speeds up to 6,000 rpm Upper turret: 12 stations, 6 driven, 4 kW, speeds up to 6,000 rpm NC controlled tailstock C axis for main spindle Power chuck, 200 mm diameter Spindle bore: 78 mm Drive power: 53 kW Chip conveyor Price: EUR 9,500 plus VAT, ex works.

Condition: used, Platform transport trailer, heavy-duty trailer Godpfx Aeiiumroftjuh Industrial trailer with 2-axle turntable steering Manufacturer: PLAN, type 11 Chassis no.: 31361-1 = year of construction 03/2015 Chassis no.: 31361-2 = year of construction 03/2015 Payload 20000 kg Unladen weight approx. 3760 kg Gross vehicle weight 23760 kg Platform height 850 mm Platform length 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width 2500 mm Tires Ø 559 x 300 mm (solid rubber tires 559/305-406.4) - 4 wheels with 2-axle turntable steering - track-running - Reversible drawbar, drawbar can be bolted to the front or rear - Drawbar with drawbar eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beam Height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checker plate - Tarpaulin body with steel base frame, can be loaded from the side Max. transport height 2300 mm under tarpaulin Length for transportation 610 cm (with drawbar folded up) Width for transportation 250 cm Height for transport 330 cm (with tarpaulin body) Weight per trailer approx. 3760 kg Good condition 2 pieces available Price per trailer

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Gujdpfeguk Dkox Aftjh When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Four in a Row – The Building Blocks of DLK’s Success – Storage Technology | Levelmaker® | Logistics | Solutions Godpfxevdqhbe Aftsuh WE OFFER Chipboard approx. 4,000 m² table size 3,200 mm x 1,000 mm x 38 mm P6 coating Net price per square meter: €10.00 This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding, customized offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price stated refers to the unit/net price or as otherwise specified in the product description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Guodjd Htr Topfx Afteh Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: excellent (used), From 11.00 euros Sendzimir galvanized Version: mounted wire gratings, ready to use. Folded on both sides Depth (towards upright): approx. 1,120 mm Gedpfxenuakpo Aftjuh For upright depth: approx. 1,100 mm Width: approx. 880 mm Load capacity: 250, 500, 750, 800, 1000, 1250kg Ask for the price for your required size wire grille/ shelf/ mesh grille Different sizes also possible (custom made). Send a quote request or have your quote compared with other providers. Over 4500 pieces in stock (mix of sizes) These wire gratings are used and in good condition. The wire grids are suitable for a pallet rack depth of 1,100 mm and a beam thickness of 50 mm. Emtrade for: Used and new warehouse/office equipment, plastic bins/crates, logistics tools, overstock, residual and return goods. Contact us for more information or view our website.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 100 linear meters in length and 7 meters high. Ideal for logistics, warehouses, and trades requiring maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for businesses with a high turnover of goods. Customizable to your requirements: The rack frames can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm Gsdpsxnyubofx Afteuh - Length: approx. 10,000 cm (100 linear meters) - Shelf load: 3,200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange painted) - Uprights: 700 x 110 cm, RAL5015 (blue painted), pre-assembled - Levels: floor + 3 - Pallet spaces: 432 incl. floor positions - Version: Used Stow equipment INCLUDED IN DELIVERY: - 28 x upright frames (approx. 700 x 110 cm), pre-assembled - 162 x beams (approx. 360 x 14.5 x 5 cm) - 324 x safety pins Price: €9,800.00 net €11,662.00 gross An invoice with VAT shown will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carrier – shipping costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding, customized offer based on your requirements. Whether new builds, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit us in our showroom! Experience our pallet racks, storage racks, and other solutions firsthand. Many systems are assembled and can be viewed in operation. Our specialists are on site to answer your questions and provide personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our telephone number is available on our company page. ☎️ We can be reached by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, axle configuration: 2 axles, wheelbase: 10,210 mm, first registration: 03/2022, suspension: air, color: black, tire size: 385/55 R22,5, Year of construction: 2022, Equipment: ABS, crane, = Additional options and accessories = - Alloy wheels - Disc brakes - Toolbox = Notes = AVAILABLE FROM WEEK 44 Hiab X-HIPRO 358 36T/M truck-mounted crane Toolbox Alloy wheels 120 kilowatt-hour battery packs The crane can also be operated via the truck’s PTO (Power Take-Off). Loading platform dimensions: 12,244 mm Loading platform height: 1,280 mm Crane installation space: 1,356 mm Both axles are steered = Further information = General Information Model year: 2025 License plate: OT-85-BF Axle Configuration Tire size: 385/55 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; steered Rear axle 2: Max. axle load: 10,000 kg; steered Dimensions Dimensions (L x W): 1,360 x 255 cm Weights Unladen weight: 9,300 kg Payload: 28,700 kg Gross vehicle weight: 38,000 kg Gjdpsxc T Rfjfx Afteuh Functional Crane: Hiab X-HIPRO 358, mounted at the rear of the chassis Maintenance APK (Technical inspection): valid until 03.2026 Product safety Manufacturer: Nijwa Used Trucks Vormerij 12, 7621HL BORNE, NL

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack for industrial storage – with approx. 33.30 m length and 7 m height. It is ideal for logistics, warehouses, and workshops requiring maximum storage capacity on minimal floor space. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for businesses with high goods turnover. Customizable Dimensions: The rack uprights can be individually adjusted to your required height – precisely and professionally converted in our workshop. Contact us – we offer tailor-made solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 3330 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam colour: RAL2004 (orange coated) - Uprights: 700 x 110 cm, RAL5015 (blue coated), pre-assembled - Levels: floor + 3 - Pallet spaces: 144 incl. floor positions - Version: Used Stow Godpfx Afsxnxkboteuh SCOPE OF DELIVERY: - 010 x uprights (approx. 700 x 110 cm), pre-assembled - 054 x beams (approx. 360 x 14.5 x 5 cm) - 108 x safety pins Price: €3,452.00 net €4,107.88 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depending on postcode - Professional installation and dismantling by trained teams available on request - Racking inspection according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be pleased to provide you with a non-binding offer – individually tailored to your requirements. Whether for new construction, conversion or expansion – we offer competent advice for your racking configuration. SHOWROOM: Visit our showroom! On site, you can view a comprehensive selection of our pallet racking, storage racking, and other solutions. Many systems are assembled and ready for you to experience firsthand. Our experts are available to answer your questions and provide personal consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many more offers & product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or call. Our telephone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 18.5 m long and 7 m high. It is ideal for logistics operations, warehouses, and trade businesses needing maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system offers stability, quality, and durability. Now available directly from stock – perfect for companies with high turnover volumes. Customizable to your requirements: The rack uprights can be adapted to your desired height, precisely and professionally rebuilt in our workshop. Contact us – we offer tailored solutions for your storage needs. Gjdpfsxnxc Rox Aftsuh PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 1850 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL 2004 (orange lacquered) - Uprights: 700 x 110 cm, RAL 5015 (blue lacquered), pre-assembled - Levels: Floor + 3 - Pallet spaces: 80 incl. floor loading positions - Condition: Used Stow system SCOPE OF DELIVERY: - 06 x Uprights (approx. 700 x 110 cm), pre-assembled - 30 x Beams (approx. 360 x 14.5 x 5 cm) - 60 x Safety pins Price: 1,980.00 € net 2,356.20 € gross An invoice with VAT will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany by our partner freight forwarder – shipping costs depending on postcode - Professional assembly and disassembly by trained teams optionally available - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new construction, modification, or extension, we will support you professionally in configuring your racking system. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, storage racks, and further solutions. Many systems are assembled and ready for demonstration. Our expert advisors are available for all your questions and offer individual consultation – we look forward to welcoming you! Didn't find the right solution yet? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. Our phone number is available on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Heavy duty wooden pallets with 3 skids accessible from 4 sides length 1680 mm Godjl Uvv Topfx Aftsuh width 1250 mm board thickness 45 mm weight 82,5 kg several available

Condition: used, Year of construction: 2005, turning diameter over bed 935 mm turning dia. over face-slide 600 mm greates pass round over bed 1.600 mm turning length 2.000 / 3.000 mm control 810D / Manual Turn Siemens centre height 475 mm max. workpiece weight between centers 6.000 kg turning speed range - main spindle 10 - 1.100 min/-1 transmission ratio 4 power capacity - main spindel 37 kW max. Torque 8.000 Nm Godpjw Spbmjfx Aftjuh spindle diameter in front bearing 190 mm spindle bore 155 mm type Parat 4 pos. RD 4 number of cross-slides 1 x-axis 850 mm z-axis ca. 2.100 mm quill stroke 300 mm diameter of quill 140 mm capture MK 6 rapid speed X: 8 m/min rapid speed Z: 6 m/min weight of the machine ca. 10,5 t dimensions of the machine ca. 8,00 x 2,30 x 4,00 m Semi-frontal Lathe KREWEMA - HFDM 45 475 x 2000/3000

Condition: new, power: 382 kW (519.37 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis truck, brand-new vehicle without registration, 33-ton variant, 6x4 drive, wheelbase 3.60 m, 520 HP, equipped with PTO (power take-off), air conditioning, auxiliary heating, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. Full MAN manufacturer warranty from the date of registration. Commercial payload: 33 tonnes Permissible gross weight: 26,000 kg Maximum permissible vertical load: 28,000 kg Tech. Plus Mileage: approx. 1,335 delivery kilometers Medium-height design Cab type: NN short Diesel engine with 382 kW (520 HP) output and 2,650 Nm torque 6 x 4 drive configuration Wheelbase: 3,600 mm, rear frame overhang: 800 mm Differential locks in rear axles Automatic transmission: MAN TipMatic 12.28 OD PTO dependent on transmission, type NTX/10c, without flange, f=1.15, position approx. 3:30 High-performance engine brake: MAN EVBec, multi-stage Transmission functions: MAN EfficientRoll, Rock-Free, Idle Speed Driving, optimized for increased tractive operation Driving modes: MAN TipMatic Performance and Efficiency up to 70,000 kg, Offroad up to 70,000 kg, Manoeuvre (shunting mode) Creeper function: MAN EasyStart Steering system: MAN ComfortSteering Full brake assist Emergency brake assist EBA Lane departure warning LDW Guedsxl Nb Sspfx Aftjh Attention assist: MAN AttentionGuard ABS Offroad with additional terrain logic EBS, ASR, ESP systems Front axle with leaf springs, rear axles with air suspension Front axle capacity: 9,000 kg, rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio: i=4.00 Trailer coupling: ROCKINGER type 500 G 6B, for trailer loads up to 24,000 kg Tech. Plus Permissible gross train weight: 44,000 kg Tech. Plus Climatronic automatic climate control 4 kW auxiliary water heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind the cab 2 roof-mounted beacon lights on the cab LED daytime running lights LED rear and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl panel, 4 functions, operable from outside when door is open Driver comfort seat, air-suspended and heated Comfort seat covers Smartphone integration MAN SoundSystem Advanced MAN Media System Advanced Navigation, 7-inch display New vehicle without registration with full MAN manufacturer warranty Net price plus 19% VAT. Attractive financing offers available upon request. All information given without guarantee. Errors and prior sale excepted. Internal vehicle number: 2571

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm Gedexbyltspfx Aftouh -Weight: 10.5 kg/piece

Condition: used, mileage: 1,355 km, power: 382 kW (519.37 HP), first registration: 10/2025, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis truck, brand-new vehicle without registration, 33-ton variant, 6x4 drive, wheelbase 3.60 m, 520 HP, equipped with PTO (power take-off), air conditioning, auxiliary heating, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. Full MAN manufacturer warranty from the date of registration. Commercial payload: 33 tonnes Permissible gross weight: 26,000 kg Maximum permissible vertical load: 28,000 kg Tech. Plus Mileage: approx. 1,335 delivery kilometers Medium-height design Cab type: NN short Diesel engine with 382 kW (520 HP) output and 2,650 Nm torque 6 x 4 drive configuration Wheelbase: 3,600 mm, rear frame overhang: 800 mm Differential locks in rear axles Automatic transmission: MAN TipMatic 12.28 OD PTO dependent on transmission, type NTX/10c, without flange, f=1.15, position approx. 3:30 High-performance engine brake: MAN EVBec, multi-stage Godpsxl Nccsfx Aftjuh Transmission functions: MAN EfficientRoll, Rock-Free, Idle Speed Driving, optimized for increased tractive operation Driving modes: MAN TipMatic Performance and Efficiency up to 70,000 kg, Offroad up to 70,000 kg, Manoeuvre (shunting mode) Creeper function: MAN EasyStart Steering system: MAN ComfortSteering Full brake assist Emergency brake assist EBA Lane departure warning LDW Attention assist: MAN AttentionGuard ABS Offroad with additional terrain logic EBS, ASR, ESP systems Front axle with leaf springs, rear axles with air suspension Front axle capacity: 9,000 kg, rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio: i=4.00 Trailer coupling: ROCKINGER type 500 G 6B, for trailer loads up to 24,000 kg Tech. Plus Permissible gross train weight: 44,000 kg Tech. Plus Climatronic automatic climate control 4 kW auxiliary water heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind the cab 2 roof-mounted beacon lights on the cab LED daytime running lights LED rear and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl panel, 4 functions, operable from outside when door is open Driver comfort seat, air-suspended and heated Comfort seat covers Smartphone integration MAN SoundSystem Advanced MAN Media System Advanced Navigation, 7-inch display New vehicle without registration with full MAN manufacturer warranty Net price plus 19% VAT. Attractive financing offers available upon request. All information given without guarantee. Errors and prior sale excepted. Internal vehicle number: 2571