Used Helical Gear Units for sale (39,163)

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW Bjdpfxogwlrds Aaqsww oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: new, Year of construction: 2003, functionality: fully functional, overall weight: 1,760 kg, total length: 2,400 mm, total width: 780 mm, total height: 810 mm, gear ratio: 16, torque: 37,700 Nm, shaft diameter: 90 mm, hollow shaft diameter: 170 mm, 1 unused industrial slip-on bevel-helical gear for conveyor belt drives. Manufacturer: Flender Penig Type: 14LA0-355x16 el380t TGL37088 Rated power: P = 257 kW Torque: 37,700 Nm Bwsdjwmlduopfx Aaqsw Ratio: i = 16 (15.8351) Speed n1: 1,000 rpm Speed n2: 62.5 rpm Input shaft diameter: 90 mm x 170 mm Output shaft: Hollow shaft Ø170 mm 0 = Shaft end right 355 = Size 16 = Ratio e = Anti-reverse device (input shaft rotation right) l = Fan 380 = Pump and fan voltage in volts t: 2 TPM resistance thermometer temperature monitors Hydraulic pump: 1.5 kW Fan: 0.75 kW Dimensions: Length with fan: 2400 mm Width: 780 mm Height: 810 mm Weight with fan: 1760 kg The 14 LA series bevel helical gear units are three-stage gear units with hardened gears and welded housings. The shafts are mounted in roller bearings. The low-speed shaft is designed as a hollow shaft. The torque is transmitted from the hollow shaft to the connecting shaft via cones and keyways. The gear units can be operated in both directions of rotation. The gear units can be mounted on the right or left side without any modification to the gearbox.

Year of construction: 2016, condition: new, 1 piece unused industrial bevel helical gearbox in original packaging Manufacturer: Flender Type: B3SH size: 17 Type: F Maximum torque: 130.000 Nm Gear ratio: i= 25.409 max. power: 800 kW oil filling: 290 liters speed: n1= 1500 1/min Bedpfjmczixjx Aaqeww Speed: n2= 59.03 1/min weight: 5450 Kg Shaft diameter d1: 1 x 110mm Shaft diameter d2: 2 x 250mm Shaft height h1: 550 mm total height h2: 1290mm Length from base: 1740mm width without shafts: 690mm width with 2x shaft: 1650 mm Gearbox has oil circulation lubrication Ø50mm backstop, thermometer, 2x heating element 1800 Watt / 230Volt Dimension of the shipping box length: 2790mm width: 1950mm Height: 1930mm Weight with packing: 6.099kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, overall weight: 750 kg, total length: 1,275 mm, total width: 560 mm, total height: 745 mm, gear ratio: 160, torque: 14,560 Nm, shaft diameter: 125 mm, 1 unit industrial bevel-helical gearbox from Manufacturer: Penig DDR TGL: 21815 Type: 10LA1-224/315 Condition: from stock clearance (likely never used) Maximum continuous torque: 14,560 Nm Gear ratio: i = 160 : 1 Exact gear ratio: Efficiency: 97% Transmittable power at: 1400 rpm-(8.7 rpm) = 13.5 kW 950 rpm-(5.9 rpm) = 9.0 kW 710 rpm-(4.4 rpm) = 6.8 kW Oil fill: 85 kg Weight: 750 kg Shaft diameter d1: 35 mm Shaft diameter d2: 125 mm Shaft height h1: 400 mm Overall height h2: 745 mm Length: 1275 mm Width: 560 mm (without shaft) Bwsdpfxsxtxphs Aaqjw Large shaft couplings also available!

Condition: ready for operation (used), Radicon Worm gear units Bedpfx Aaei A Awieqoww Type : BU 12 Ratio : 30 : 1

Condition: new, functionality: fully functional, 45 units SEW Lenze geared motors, e.g. helical gear units, new motors with gearboxes. Priced significantly below manufacturer's list price. Bedpfx Aaev Uvvfsqsww Info: We have over 20,000 DEMAG items in stock! Also check out my other offers from our warehouse inventory!

Condition: new, Gear Units / Gearboxes / Transmissions, Large stock of used and unused gear unit and reducers from manufacturers like Flender, Siemens, Hansen, KSB, WGW, TGW and SALA Different ratio's, sizes, with / without backstop. Please contact us to find a suitable gearbox. Bwsdpfx Aaoggfhneqew

Year of construction: 2016, condition: good (used), Helical Inline Gear Manufactur: Benninghoven Model: SK 103- 250MP/4 TF WE year of construction: 2016 fabrication-N°: 201916131-100 201863267-100 Base weight: apr. 1200 Kg 2x available. Bwjdpfolk D Hajx Aaqow Price: 3800,-€ per piece The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: ready for operation (used), Components to build a very large energy waterwheel. Gearbox: Shaft-mounted gearbox Flender SFO 500 Number of gear stages: 4 Transmission ratio: 185,63 : 1 Transmittable torque: 131.300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000mm width: 800 mm height: 1000 mm To the shaft / tube Shaft diameter: 560 mm Tube wall thickness: 35 mm Bearing distance: 10000 mm Shaft can be shortened as desired due to the screwed hubs. Bwsdpsh Rrtnsfx Aaqjw Welding is possible without problems on the tube because it has a wall thickness of 35 mm.

Condition: excellent (used), Helical geared motor Manufacturer Siemens Type DF38-LA71S4I-L4N Motor number 8824014/001 2KJ1202-2CD13-9FK1-7 Power 0.25 kW Speed n1 1,350 rpm Speed n2 16.4 rpm Shaft diameter 25 mm Shaft length 50 mm Neck diameter mm Bolt circle 220 mm Weight 20 kg Bwedpfx Aaehcgb Sjqjw Dimensions 550 x 200 x 200 mm several motors available self collection possible.

Year of construction: 2019, condition: good (used), Block Helical Inline Gearmotor Manufactur: NORD Drivesystems Model: SK 83 - 180MP/ 4 TF year of construction: 2019 fabrication-N°: 202621779-100 Power: 18,5 kW Output torque: 3882 Nm Base weight: apr. 440 Kg Data sheet available. The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Bedpfx Aslkd Emoaqjww Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Oussman-Machinery

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z Bjdpfsrvg N Dex Aaqoww

Condition: good (used), Manufacturer Siemens Type DF39-LA71MG4I-L4N Motor number FDU1601/2294757 001 Power 0,25 kW Speed n1 1,350 rpm / 1,650 rpm Speed n2 16.3 rpm / 20.0 rpm Shaft diameter 25 mm Shaft length 50 mm Diameter of extension 120 m Bwodpfehgbtrox Aaqsw Hole circle clamping screws 100 mm Weight 13 kg dimensions 550 x 220 x 170 mm several motors available

Year of construction: 2019, condition: good (used), Block Helical Inline Gears Block Manufactur: NORD Drivesystems Model: SK 82 F year of construction: 2019 fabrication-N°: 202624919-100 Base weight: apr. 280 Kg The ad is being edited, more detailed specifications & Plant description will follow. Bodpfxolkfzdo Aaqoww Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Oussman-Machinery

Condition: good (used), Block Helical Inline Gearmotor Manufactur: NORD Drivesystems Cyh93Vw3Ak Model: SK 83 - 180MP/ 4 TF year of construction: 2019 fabrication-N°: 202621779-100 Power: 18,5 kW Output torque: 3882 Nm Base weight: apr. 440 Kg Bwjdpfx Aajt Ihdwoqew Data sheet available. The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: like new (used), Horizontal carbon steel tanks 73.000l Bwodpfxjibh S He Aaqow Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Bodpfswqr Twsx Aaqeww Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64 Bedpfswqr Tdjx Aaqsww

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 100 kg Part suitable for: machines Bedsxhz Aajpfx Aaqsww Type number: 558-0411 CAT313 Gear + bearing swing Caterpillar OEM : 558-0411 Article nr.: C042013029N-veiling Gear + bearing swing Caterpillar

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Bwsdexr Ng Uopfx Aaqow Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): Bwodpow Iquyofx Aaqew -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel Bodjrualpepfx Aaqeww X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Bwsdpfxjxdfa Uj Aaqjw Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Bodpfexdfazsx Aaqeww Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Bwjdpfxsxdfano Aaqew Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)