Used High Speed Spindle for sale (49,387)

Condition: used, functionality: fully functional, High-speed analog input module from the SIMATIC ET 200SP series for acquiring voltage and current signals, including a matching base unit. Manufacturer: Siemens Series: SIMATIC ET 200SP Module type: AI 2xU/I 2-/4-wire HS Article number, analog module: 6ES7134-6HB00-0DA1 Article number, base unit: 6ES7193-6BP00-0BA0 Base unit type: BU15-P16+A0+2B Number of analog inputs: 2, differential inputs Signal types: Voltage and current Connection technology: 2-/4-wire Dedpfs Ah T Tgjx Ak Ascp Voltage measurement ranges: 0 to 10 V, 1 to 5 V, -5 to +5 V, -10 to +10 V Current measurement ranges: 0 to 20 mA, 4 to 20 mA, -20 to +20 mA Resolution: Up to 16 bits Measurement accuracy: ±0.3% relative to the input range Minimum cycle time: 125 µs Conversion time per channel: 10 µs Oversampling: Up to 16 values per cycle Nominal supply voltage: 24 V DC Permissible supply voltage range: 19.2–28.8 V DC Current consumption: 39 mA (without sensor supply) Typical power dissipation: 0.95 W (without sensor supply) Sensor supply: 24 V DC, short-circuit proof Diagnostic function: Channel diagnostics Operating mode: Clock-synchronized operation possible Parameterization: STEP 7 / TIA Portal Base unit connection technology: Push-in terminals Base unit connection terminals: 16 Base unit nominal voltage: 24 V DC Base unit current carrying capacity P1/P2: Max. 10 A Base unit current carrying capacity, process terminals: Max. 2 A Base unit potential group: Continuation of the potential group from the left Installation width: 15 mm Dimensions, analog module (W x H x D): 15 x 73 x 58 mm Dimensions, base unit (W x H): 15 x 117 mm Permissible ambient temperature during horizontal installation: -30 to +60 °C Permissible ambient temperature during vertical installation: -30 to +50 °C Scope of supply per unit: 1 analog input module with 1 base unit Available quantity: 6

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm Dcodpoz Arnisfx Ak Asp - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: refurbished (used), Year of construction: 2027, pressing force: 50 t, Machine available to order (made-to-order): Dodpfszlqk Ujx Ak Aocp Fully reconditioned B500-950 high-speed automatic stamping press Table length 950 mm (optionally 1150 mm or 1250 mm available), Adjustable stroke 16 to 51 mm, A servo feed can be installed as an alternative to the Bruderer BBV 202/120 roll feed. Contact us for detailed quotations.

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 Djdpjzkudcofx Ak Aocp - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine Dedpfx Akoufw S Rs Ajcp

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz Dedpfx Akoikvcae Ajcp ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. Dcsdpfx Ashgiwnsk Aop -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: refurbished (used), Year of construction: 2027, pressing force: 60 t, Machine made to order: High speed press BSTA 60 Retrofit and general overhaul. Conversion to electronic drive und new Unidor PC-control system. Dcjdpszlqlfsfx Ak Ajp Tool area enlargement possible. Please contact us for detailed offers.

Condition: good (used), KLOPP H 1000 – Planing machine - Planing length approx. 1000 mm - Planing width approx. 750 mm - Automatic feed Dedpfx Akozfv Nve Ajcp - Work table extension Dimensions: L x W x H 3.4 x 1.5 x 1.7 meters / Weight 3800 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Outreach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm Dodjwu Ilwopfx Ak Ascp 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Condition: refurbished (used), Year of construction: 2027, pressing force: 25 t, Machine available to order (built-to-order): Fully refurbished B250-740 high-speed automatic stamping press Table length 740 mm (optionally 850 mm), Dcsdpfxszlqkzj Ak Aop Adjustable stroke 13 to 38 mm, A servo feed can be installed as an alternative to the Bruderer BBV 190/85 roll feed. Contact us for detailed quotations.

Condition: reconditioned (used), Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL Djdpfxozlqgij Ak Ajcp - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls, - Roll feed BBV or optionally servo feeder available Please contact us for a detailed quotation!

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Djdpfewv Umqjx Ak Aecp

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Dcjdpowg Hunefx Ak Ajp voltage 24 V weight of the machine ca. 3,5 t

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Dodpjwz Ukysfx Ak Aocp Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm table surface area 850x600 mm ram surface 760x550 mm hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm Dcjdpelp U Nqsfx Ak Ajp total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Dedpey R U Azsfx Ak Ascp Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,947 h, functionality: fully functional, machine/vehicle number: 1381, overall weight: 18,920 kg, year of last overhaul: 2026, We offer this Doppstadt AK 560 ECO Power high-speed shredder, which has been fully refurbished and brought back to perfect working order by the dealer. It was first put into service in 2020. Features include: - 6m rear conveyor - Overhauled shredding chamber, new rotor - New hammers - New hopper and roof plates - Equipped with two screens - Complete engine overhaul - New flexible coupling Dcsdpfx Asy Tbcgok Ajp - Up-to-date technical inspection A list of work carried out is available upon request. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA Dcedpfxsquhbgs Ak Asp - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump Dodpfxjzhuale Ak Ascp - Thread cutting device - Drilling depth stop - Drill chuck

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots • Arm travel distance 1050 mm Dcodpfez R Rv Rox Ak Asp • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo

Condition: used, Year of construction: 1994, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50EL - Tool loading area 950mm L-R - Machine will be mechanically overhauled - Roll feed BBV 205/120 (90° feed pitch) Dodpjzkk Azofx Ak Aocp Please contact us for a detailed quotation!

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device Djdpfx Akeu Et Nbs Ascp - Vertical T-slots on the left side of the machine

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 Dcodpfxozpfy Sj Ak Asp -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm Dcjdpfx Asra Rr Ejk Aop hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t