Used High Speed Cutter for sale (47,651)

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Godpfsy Tx R Iox Aihouh

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Godpfxswz Ufwj Aihouh Type: Two chucks

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, We offer you: Guodpoz I U D Usfx Aihoh Manufacturer: Chiron Type: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical data: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar diameter: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swiveling unit: Swiveling angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37,280 h Spindle hours: approx. 11,360 h Please refer to the PDF in the attachment for technical features and accessories. Accessories, tools shown in the images, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: Gedpfxezdklpo Aihjuh spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Gujdpfx Aijz Hmb Ashsh Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Guodpfx Aiozvx Dksheh Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Gsdpfxsx Iiw Is Aihouh Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). Gujdpfoyw Rzaex Aiheh The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Godpfevtpdgsx Aihjuh Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,000 kg, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, spindle nose: HSK 63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, KEY FEATURES: table dimensions 1200 × 600 mm table load 1,200 kg axis travels X 1,050, Y 600, Z 600 mm HEIDENHAIN i-TNC 530 CNC (color LCD screen), advanced conversational programming high-speed package RS 232 serial port, USB slot, RJ 45 Ethernet network port and hard disk Rapid traverse rates 40 m/min on all axes Working feed rates up to 20 m/min Cooled ball screws weight 7,000 kg HSK 63A electrospindle, 20,000 rpm, 25 kW, chiller-cooled remote handwheel RENISHAW tool control laser 30-position random tool changer standard equipment tool holder set (at least 10 pieces) integrated fume extractor high-pressure coolant through the spindle Godpfx Aoz D Alloihouh coolant tanks with pumps, chip conveyor operation, maintenance and programming manuals, electrical diagrams CNC manuals CE certificate leveling feet

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Gsdpszb D Rnofx Aihjuh

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg Gujdpovphiyefx Aiheh * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). The balancing machine is sold with 83 adapters for balancing turbines. Guedpfx Aiez R Nq Rsheh

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Guedpfxsztr Nue Aiheh Variable Speed Pulley Used #10 Dies

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots Godpfx Aijz R Rv Rshsuh • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. Gsdjz Dx Shjpfx Aihsuh During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) Gujdpsyq Nyyefx Aihsh TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling Gedpew Hxiwjfx Aiheuh ----- Clearance Sales -----

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Gedpfx Aioz Ar Ezshjuh Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. Gusdpfxjz E Ikij Aihjh • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210198, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2026, Equipment: documentation/manual, F2000 HS - HIGH SPEED AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 1200 cartons/min (depending on length and quality of the cartons) - Motorized carton magazine: 120 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Protection class IP 54 - Compressed air 6 bar - Air consumption 22 nl - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable +30 mm - Weight 1,160 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection The system includes a GEM B52HS carton sealer. GEM B52HS CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ mm - Width: min. 150 mm - max. 670 mm - Height: min. 100 mm - max. 670 mm TECHNICAL DATA: - Drive and guide belts, vertical - Carton format adjustment, manual - Sealing unit, bottom - Standard version T22 / T23 - Adhesive tape width: 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm Guedpfxjz Dwz Ie Aihoh - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Consumption 0.25 kW - Protection class IP 54 - Operating environment +5° C - max. +35° C - Transport speed 22 m/min - Average production 1000 cartons/hour - Working height 650 mm - Weight 120 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may contain optional features that incur an additional cost.

Condition: excellent (used), Year of construction: 2010, Kawasaki YF03N Ultra-High-Speed Delta Handling Robot The Y series handling robots are parallel-type pick & place robots that offer quality and reliability. Brand: Kawasaki Handling Robots Type: YF03N Year of manufacture: 2010 Serial number: YF0030012 Electrical connection: 400 V Overall dimensions (L): 2400 mm Overall dimensions (W): 2350 mm Overall dimensions (H): 2750 mm Description of the Kawasaki YF03N Robot Type: Parallel kinematics Degrees of freedom (axes): 4 Maximum payload (kg): 3 Positional repeatability (mm) *1: ± 0.1 Working range (mm): ø1,300 × H500 Guodpjg T U Nbefx Aihjh Weight (kg): 145 Angular repeatability (°): ± 0.1 Cycle time (payload) *2: 0.27 s (1 kg), 0.45 s (3 kg) Other: 400 Volt; Camera; Software; Instructions; Components; Steel frame, with control cabinet; 2x connection cable, 5-pin; Control panel E40E-A003 You can find more new and used items in our shop! International shipping costs upon request!

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Godpfx Aioyk Ip Tsheuh Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 2005, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) Gsdpfszkudcox Aihjuh - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Gsdpfsz Rwpyex Aiheuh Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.