Used Hob Sharpening Machine for sale (64,822)

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Rsdpfx Acecrd Nmo Tecd

Condition: ready for operation (used), Gear shaper STANKO 5M161 Max. diameter of gears to be cut: 1250 mm Max. module: 12 mm Weight: 10500 kg Rodpfx Aeqcvkvoc Tscd Gear shaper STANKO 5B150 Max. diameter of gears to be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double s.p.m.: 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Rsdpfexln Iwjx Ac Tocd Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Rsdpfxey Hfm Ns Ac Tocd Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, functionality: fully functional, Maximum diameter with counter support Maximum tooth width for axial milling Straight-tooth gearing Outer diameter 250 mm Outer diameter 50 - 100 mm Rodjzhhcaepfx Ac Tscd Outer diameter 100 - 250 mm Helical gearing up to 45° Tooth helix angle Outer diameter 35 - 100 mm Outer diameter 100 - 250 mm Maximum tooth width for radial-axial milling Maximum module Maximum tooth helix angle Smallest number of teeth to be milled 190 mm 200 mm 140 mm 200 mm 240 mm 5 mm Any Tool Maximum diameter Maximum length Max. tangential feed movement of the milling cutter Max. vertical feed movement of the milling cutter Indexing table Distance between the center of the milling cutter and the center of the indexing arbor Diameter of the indexing table 140 m 165 mm 100 mm 260 mm 50 - 250 mm 300 mm 110 mm 350

Condition: used, Sharpening and leveling machine, Oppliger. Rcodpjdm I R Hofx Ac Tod

Condition: excellent (used), Vollmer CANA E: Sharpening machine for circular saw blades. Rodpsdwbicjfx Ac Tecd

Condition: good (used), Vollmer CA 300 complete with support stands Rjdofbgvbopfx Ac Tscd

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Rjdpfx Aopl D Hxsc Tecd Tyop GA 250

Condition: like new (used), Year of construction: 2014, functionality: fully functional, TECHNICAL SPECIFICATIONS: Redpfx Acezh I Naj Tocd Sharpening capacity: from 2 to 40 mm Number of sharpenable cutting edges (right and left): from 1 to 12 Tip angle: from 40° to 180°

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Rjdpfxjxc E H Ss Ac Tscd Available 24.08.2024 *

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC Rcjdpfx Aewwkt Asc Tsd

Condition: used, Year of construction: 2008, machine/vehicle number: 112051, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Weinig Rondamat 960 Powerlock (automatic straight knife grinder and profiling grinder) The specifications are as follows: Weinig Rondamat 960 Powerlock / HSK profiling grinder. High-precision knife grinder for sharpening straight knives and profiling using a template. Sharpening of straight knives in a cutter block. Hand-held grinder for profiling and straight grinding. Abrasive wheel diameter min./max.: 150 mm / 225 mm Abrasive wheel width: ceramic 5 mm, borazon 10 mm Abrasive wheel bore: 60 mm Tool circumference min./max.: 100 mm / 300 mm Tool width max.: 240 mm Abrasive wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Rsdpfx Aszg Ut Njc Tocd Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotating heads up to 60 degrees Coolant tank approx. 50 liters Table feed: 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick-change system. Radial table mounting with precise adjustment. Max. tool width 240 mm.

Year of construction: 2002, condition: good (used), Vollmer CA 200 Rcsdjfbgvdjpfx Ac Ted

Condition: used, Arbor Ø 30 mm Mandrel length 135 mm Rcsdpfjlf H Tysx Ac Tsd width 600 mm length 1.000 mm height 1.400 mm WIDMA tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes.

Condition: used, grinding wheel diameter max. 225 mm diameter of tools max. 300 mm tool diameter min. 80 mm Rcjdpfx Aslf H Tgsc Ted Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Max. tool width: 230 mm Includes new coolant pump.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1980 x 1750 [mm] - Machine height : 1960 [mm] - Machine weight : 2800 [kg] EQUIPMENT Rcedjwwa Dkjpfx Ac Tjd - CNC : SIEMENS SINUMERIK 840D - Automatic loading and unloading system with 50 positions

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] Redswwa Ddspfx Ac Tscd - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.100 [mm] - Machine height : 1.960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Lubricating tank with pump * with cooling unit for coolant - Oil mist extractor : ABSOLENT ODR 2000

Condition: used, TECHNICAL DETAILS - Axes : 5 - Max. tool diameter : 150 [mm] - Max. tool length with manual loading : 300 [mm] - Max. tool length with auto loading : 140 [mm] - Max. tool weight : 25 [kg] WORKHEAD (A-AXIS) - Attachment : ISO 50 - Strokes X/Z : 360 / 300 [mm] - Stroke : 360 [°] - Max. speed : 800 [r/min] WHEELHEAD (B-AXIS) - Attachment : HSK-E40 - Stroke Y : 200 [mm] - Stroke : -30 / +180 [°] - Max. wheel diameter : 125 [mm] - Max. speed : 20.000 [r/min] - Power : 7 [kW] WHEEL MAGAZINE - Number of positions : 4 TOOL MAGAZINE - Type : using the linear axes, with Schunk collet - Tool length : 40 – 140 [mm] - Tools Ø4-6 per pallet : 200 - Tools Ø6-10 per pallet : 96 - Tools Ø6-16 per pallet : 54 ELECTRICS - Main voltage : 400 [V] - Total power : 19 [kW] DIMENSIONS - Floor space : 2.200 x 3.350 [mm] - Height : 2.600 [mm] - Weight: 2.500 [kg] Redsuhbzujpfx Ac Tscd EQUIPMENT - CNC : NUM AXIUM Power P2 - Software : Easygrind 6.08 - Linear scales upon X/Y/Z : HEIDENHAIN - Spindle cooling unit - Coolant tank with pump : 10 [bars] * with retractable nozzle - Mist suction unit : ELBARON RON/A 100 DV - Airblow upon tool - Fire estinguisher (to be checked buy the buyer through a specialist) - Number of wheel supports : 12 - Number of pallets : 4 - 1 collet chuck ISO50 with auto clamping - 1 collet chuck ISO50 with manual clamping, capacity Ø : 32 [mm] - 1 collet chuck ISO50 with manual clamping, capacity Ø : 20 [mm] - 1 MASTER calibration device for self-calibration of axes and probe

Condition: used, Sharpening machine CINCINNATI AS Redjuhbnbjpfx Ac Tscd

Condition: used, Sharpening machine CINCINNATI AS Rcodpfx Asuhbm Roc Tjd

Condition: used, Knife sharpening machine Technical data: Max. length of knives to be sharpened: 300 mm Diameter of grinding wheel: 125 mm Automatic feed Rsdpfezhukkox Ac Tecd Power supply: 380 V Overall dimensions: Length: 760 mm Width: 560 mm Height: 800 mm

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Rsdpfx Asy Umizoc Tocd Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: used, 1 used Vollmer CAGB54 U band saw sharpening machine Grinding wheel diameter: 200 mm Complete Control system functioning Carriage has been overhauled and newly fitted with bearings, and is also suitable for CAGB50U Rcodpfx Acszguvko Ted Head and coolant pump have been newly fitted with bearings.

Condition: used, Year of construction: 1982, I have a Weinig Rondamat 930 tool grinder, manufactured by the German company Weinig, for sale. The machine is in full working order. Rsdpfx Ajzhipbec Tecd The stated price is for export in Poland, plus 23% VAT. Transportation is the responsibility of the buyer.