Used Hot Dog for sale (3,500)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Fjdpfxowy Elle Al Uopn

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas Fodpfxoz Harzj Al Uopn adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Fuel: Heating oil EL Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Fodpfx Asxwkw Ejl Uspn Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. The following inspections were carried out: Visual inspection, inside and outside Update from V1.56 to V1.6.7 Temperature calibration Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired. Fpedpfx Aezl R R Ujl Usn

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. The original new price was over €20,000. Fedpfjzdu Hqox Al Uspn

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Fjdjzdnpxopfx Al Uopn Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Fpjdpfx Aewz Scael Uen

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 80-91, These carton erector and box closer machines has been manufactured to handle and transfer of packing products in order to avoid their damage. The machines have been thought to work with the most habitual boxes of different sizes. Fpsdpfx Ajry T Acsl Ujn

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable Fpjdpsx Hi R Sofx Al Uon After a complete inspection, fully functional PRICE REDUCED FROM 1550 TO 1000 EUR!!!

Condition: used, Year of construction: 1989, For sale is a robust GIERLICH hot stamping machine (hot foil stamping machine) in good condition. Technical data: Manufacturer: GIERLICH Type: PE 1200-2400-2P electronic Fjdpjzi U Thjfx Al Uopn Year of manufacture: 1989 The machine can be inspected near Solingen by prior arrangement. Sale ex works. Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Fpedpfx Aszatf Eol Ujn Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Year of construction: 1995, condition: used, functionality: fully functional, machine/vehicle number: 3521, Hot melt adhesive application machine, type ZP 9290 - Tank capacity: 90 liters - Heating power: 5.5 kW - Melting capacity: 12 kg - Electrical connection: 400 V Fpedpszrm Hljfx Al Uen - Wiring diagram and operating instructions / other documents are included or available Inspection possible by appointment in 06502 Thale.

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Fedpozgui Djfx Al Uspn Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: used, Hotrunner controlunit PSG 12 12 units 230 Volt price: 2.850 € contact: Mr. Rainer Eckerle Fpsdpsz Earlofx Al Usn

Condition: new, Die cutting machine TYMC-1200 with hot stamping Fedez N Sd Nepfx Al Uspn The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table width: 4,200 mm, table length: 1,300 mm, HOT PRESS FOR EDGE-GLUED PANELS ORMA MOD. LS 42/13 AS / BO – CE RULES - N. 10 press cylinders - N. 5 platen cylinders - N. 8 front cylinders - Top-down pressing system - Continuous working capability - 45 kW diathermic oil boiler - Platen dimensions 4200 x 1300 mm - Complete with loading/unloading system - 250 mm glue spreader Fodpfjywcg Iex Al Ujpn - Year 2005

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons Fjdpfx Aezwphpel Ujpn automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Fpodewabbvopfx Al Ujn The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: reconditioned (used), Year of construction: 2004, Gietz FSA 870 S high speed foil stamping , embossing and die cutting machine Fpedpfxez Hxake Al Usn Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Low hours run High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : standard delivery

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Fjdpfjz Az Dusx Al Uepn Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: good (used), Year of construction: 2018, Flame-Cutting and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Fpedpfovzrczsx Al Usn Plasma Cutting for Material Thickness: 5 to 50 mm Spindle Speed: 160 – 4,000 rpm Automatic Tool Changer Tool Holder Capacity: 14 Drive Power: 16 kW Drilling Diameter: 5 - 40 mm V-Scoring Marking: 5 to 40 mm Sheet Metal Dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum Dimensions of Finished Parts: 80 x 80 mm Sheet Metal Weight max.: 2,600 kg and 650 kg/m Infeed Side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transfer conveyor Number of Carriages: 2 with clamps NC feed carriage, positioned on the side 4 Clamping Jaws (2+2) 3 Short-stroke Transfer Conveyors Working Height: 1,000 mm Outfeed Side: Outfeed roller conveyor with a lowerable discharge table and slide into a material collection bin for unloading small parts. Filter unit incl. piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. Software options for milling and marking LANTEK license 51026ä Availability: immediately!

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller, complete with all accessories as shown in the pictures. Fpedpfx Ajw N Rd Dsl Usn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, wire working range: 0,1 - 2,0 mm cutting length: 5 - 50 mm output: 600/min. Fpjdszwdggspfx Al Uon complete with ciller and motorized decoiler

Condition: ready for operation (used), functionality: fully functional, Hot stamping machine Semi-automatic Fpedpfx Alszq Uuus Ujn Mechanical sliding table Temperature and timer control Stamping plate size: 35 x 24 cm Various replacement plates In addition, inking unit included (disassembled)

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles 240 Volts 7200 Watts 50 / 60 HZ In good working condition Fpsdourf T Djpfx Al Usn