Used Hot Foil Stamping Machine for sale (67,002)

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Giedpfxsdtq Ane Akysu Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Godpshvikujfx Akysiu

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Gisdswurhispfx Akyeu Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades Gisdpfx Asvkf Agjkyou The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; Gsdpfx Ajvliucjkyoiu The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Gjdpoxuhrbsfx Akyoiu Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 CBK - 4 Ø 1000 – 2000 2 x Ø 500

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Giodpfsxuhf Isx Akyeu Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ........, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Gsdpfoxt N Twex Akyoiu Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Gedpshy N Uhofx Akyoiu Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Auto impression Preloader Machine has been completely built by Starfoil. Condition as is.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Gsdpfjzb Ipzex Akyoiu 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Gisdszbitujpfx Akyou Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Gjdpfx Aksq R Tnzjyjiu Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm Godpfx Akoiit Ereysiu MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Gjdpfszdazbjx Akyeiu Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Gedszdayqspfx Akysiu Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Gisdpfx Asza Tcqekysu Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) Gedpfx Aeza S Irjkysiu External reference: 33

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950 Giedpfx Akozbnmgeyju

Condition: used, Year of construction: 2020, The XYZ Machine Tools XYZ CT65 LTY CNC turning centre in excellent condition with 12-station VDI 30 live tooling turret, Y-axis capability, hydraulic tailstock, chip conveyor, through-tool coolant, and automatic lubrication system. Designed for high-precision turning and mill-turn applications with bar capacity up to 65 mm. Machine Specification: ----- CONTROL Seiemns 828D with Shopmill Conversational and G-code programming capability Electronic handwheel for setup and jogging Fully interlocked safety guarding ----- CAPACITY Chuck size (main spindle): 200 mm Maximum swing: 400 mm Maximum machining diameter: 220 mm Maximum turning length: 490 mm Maximum bar capacity: 65 mm ----- TRAVEL Travel (X axis): 220 mm Travel (Y axis): ±35 mm Travel (Z axis): 500 mm Rapid traverse rate: 20 m/min Cutting feed rate: 0.01–10 m/min ----- MAIN SPINDLE Spindle nose: A2-6 Maximum spindle speed: 4,500 rpm Spindle bore: 76 mm ----- TURRET Turret type: 12-station VDI 30 power turret Number of tools: 12 Turning tool size: 20 x 20 mm Maximum boring bar diameter: 32 mm Live tooling maximum speed: 4,500 rpm ----- TAILSTOCK Tailstock taper: MT4 Quill diameter and travel: 60 mm x 90 mm Hydraulic tailstock Programmable hydraulic tailstock (optional) ----- COOLANT & LUBRICATION Through-tool coolant system Flood coolant system Automatic lubrication system Coolant tank capacity: 80 litres Oil skimmer (optional) Oil mist device (optional) Coolant gun (optional) ----- ACCESSORIES Chip conveyor and chip bin Parts catcher system Renishaw automatic tool setting arm Air gun Transformer Leveling bolts and blocks Tool kit ----- MACHINE SIZE Machine dimensions (L x W x H): 3240 mm x 1788 mm x 1838 mm Giedpfjy S A D Nox Akyou Door opening width: 668 mm Machine weight: 4,400 kg Control: Siemens 828D Spec: Spindle bore 65 mm | Max Swing 400 mm | Travel X 220 Z 500 Y +-35 mm Accessories: Chip conveyor and chip bin, Parts catcher system, Renishaw automatic tool setting arm, Air gun

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Giedpoxvwcxsfx Akyeu Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Cutting format (mm): 12000*2500 X-axis travel (mm): 2530 Y-axis travel (mm): 12050 Z-axis travel (mm): 120 Maximum synthetic positioning speed (m/min): 140 Acceleration (G): 1.5 Gisdpfx Aswwz Dxjkysu Main unit volume (mm): 15600*3650*1900 Floor area (mm): 16000*5500 Total machine weight (KG): 12500

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Giedpjzav N Tjfx Akyou Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Giedpfezav D Dox Akyeu Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Gsdpfxeyrrx Uo Akyjiu Automatic lubrication system Lighting Enclosed guarding

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Giodpfxey Aam No Akyou Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured