Used Hot Foil for sale (4,157)

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Ijdpfxsxdt Dho Ap Djbc Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. • Location: Upper Austria (AT), loading on site possible. No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Ibsdpfewl Iw Uox Ap Doc

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Ibodjwmfyvepfx Ap Djc Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Iedpfsxa D Hrex Ap Djbc

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use Iodpfx Aoxhfqnep Dobc The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Year of construction: 2018, condition: new, Demonstration machine Ibodpjw I Uizefx Ap Dsc Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: used, Hotrunner controlunit PSG 8 8 units 230 Volt Ibodswgb Ngspfx Ap Djc price: 2.250 € contact: Mr. Rainer Eckerle

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Length: 6,265 mm Width: 1,201 mm Height: 1,375 mm Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Cooling: Up to 2-level cooling zone (ambient air) Ibedpeyf N Uysfx Ap Dec Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Ijdex D Rq Eopfx Ap Debc

Condition: used, New: No Part suitable for: trucks Iedpfeytfdgsx Ap Dobc Price: On request VAT/margin scheme: VAT deductible

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Ibsdpfx Apjvvvrpo Doc Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: used, Year of construction: 1992, closing pressure 600 kN Ibjdpfx Ajfrvzvsp Dsc clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, 10 Bilz quick-change tool holders Ijdpfxodn Swre Ap Dobc WES 3 B 16 x 22. 3 pieces available WES 3 B 20 x 16. 1 piece available WES 3 B 22 x 18. 2 pieces available WES 3 B 25 x 20. 3 pieces available WES 3 B 28 x 22. 1 piece available

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Ibodpfoixupmex Ap Doc Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Ibsdpfxjixupuj Ap Doc Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: excellent (used), Manufacture: Aerofoil Type: 30J 26° JAR Blade diameter: 750mm Iodpfsk Nli Hex Ap Dobc 2 stage Air transport: approx. 5000 m3/h++ 110V 5.5A, 0.48hp, direct current (DC)

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) Ibedpoiu Smbsfx Ap Dsc 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm height of form 300-700 mm column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Ibodpfxsvfhrte Ap Djc Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Ibedeu Nu I Tepfx Ap Doc Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: good (used), devapo hotAir Midi 12 convection oven The hotAir convection ovens from Devapo were specifically developed for warming and baking food/ingredients and for bake-off products. This model features a highly functional and user-friendly control system. Two operating steps (selection of the desired preparation time and temperature) ensure a guaranteed and consistent end product. Included: hotAir grid Optical hard-coated display with LED lighting On/Off/Open switch Stepless temperature control dials End-of-cycle signal Advanced Airflow System Rotary knob Tilt protection Special thermal insulation Robust, certified construction Service-friendly control cabinet Ibedpoi Ey T Iofx Ap Djc Removable ventilation plate Completely made of stainless steel Self-ventilating door Electrical connection values: 230 VAC Capacity, single-portion tray 225 x 175 x 35 mm / 250 x 190 x 45 mm: 12 pieces Capacity, portion trays 160 x 115 x 30 mm: 24 pieces Dimensions: 680 mm x 490 mm x 549 mm (W x D x H) Item condition: used Scope of delivery as shown in the picture You can find more items – new and used – in our shop! International shipping costs available upon request.

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. Iodpfx Ajg D Urgop Dsbc We are doing reparation IPG laser module in your place with warranty. Speaking English and Serbian language.

Condition: used, hot runner control device PSG NR 4 06 6 x fach 220 V price: 1.450 Euro contact: Mr. Rainer Eckerle Ibedpfxjg Htcvo Ap Djc

Condition: good (used), AFT Single shot depositor Isdpfx Asfv Spvep Dobc Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Double-deck screening plant 1,400 x 4,000 m with conveyor and stockpile belts Complete electrical installation Ibedpfstpamgex Ap Doc

Year of construction: 2003, condition: excellent (used), Heating channel Hotset Isdpfed H Du Nex Ap Debc Year of manufacture approx. 2003 6 channels