Used Hot Stamping Machine for sale (66,179)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN Fodpfx Ajrwnyvsfnefu 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1977, equipped with: 1 pce. BIHLER auccustic cabine 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units Ffjdpfxsfzr Aqo Afneu 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm Ffjdpfx Asvuzvdefnsu stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: Ffodpfxsn E N Ndj Afnju 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm Fsdjrpk Axspfx Afnefu output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: Fsdpfx Aopq H Upjfnjfu 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: 1 slide feeding system right hand side Fedpfx Afstzlzasnsfu 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN Fodpor Axlvsfx Afnofu 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: Ffodpetmtzkefx Afnou 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1978, equipped with: Ffedpfx Asma Tf Defnsu 1 Grip feeding system right hand side 4 Slide units Working range: Wire diameter range: 0,5 - 2,0 mm Stripmetal width: max. 10 mm Feeding length: max. 100 mm Output: max. 300/min.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN Fsdpjtmty Nefx Afnjfu 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: Fjdpfx Ajtqf Iqsfnefu 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side Ffodpfx Afswxarqsneu 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: ready for operation (used), Global HS-8307 Hot air welding machine Automatic strip cutter Ffodpovaxfaofx Afnsu You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), functionality: fully functional, For sale: Heidelberg SGB Cylinder 56 × 77 cm with hot foil stamping attachment. Die-cutting is also possible. The machine is in very good technical and visual condition – fully functional, ready for operation, and requires no additional investment. Price: 17,500 EUR / 74,000 PLN – negotiable. The set includes a honeycomb plate for hot stamping and a frame for mounting the cutting die. Viewing on site is possible. Ffedpfjycfnksx Afnou

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg Ffedpfodz Dy Hox Afnou - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Ffsdox N Dxvepfx Afnsu The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: good (used), Heidelberg Tiegel TP Letterpress Hot Stamping This machine is ready for hot foil stamping, die cutting, printing, creasing, perforating, and more. The machine is in very good condition. Original Heidelberg ART hot foil stamping machine with temperature control and a drilled heating plate. This machine is from the end of its production years, an incredibly rare model. This version is distinguished by its exclusive roller holders, a drawer under the machine, and a large protective cover for the wheel. Inking system. Hard platen for the pressure plate. Set of accessories and tools. Fjdsx N Dwrepfx Afnsfu Machine format: 26x38cm 600gsm grammage 5000 sheets/h speed 1200kg weight 400V power supply Fully complete, includes two frames, spare parts, and instructions.

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Fjdpfx Aex I Nfrjfnofu Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Ffjdpoxmiqijfx Afnju

Condition: good (used), Baier Geba Hot Stamping Press Ffodpfx Afjx Hqnxensu This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Ffedpfxjwirkgs Afnju Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification Ffjdpfox Ezkuex Afnsu High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject Fodpfx Afsx Hp E Aonefu 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. Fjdpfxewck U Rs Afnsfu • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.