Used Hydraulic Pipe Bender for sale (16,351)

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm Hsdpewvva Sjfx Ag Iei table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) Hedpovzxrpefx Ag Iei as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m Hjdpjvuuckofx Ag Ioi permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l Hjdpfx Agjvut Rmo Iji power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t Hsdpfx Ajvut H Ieg Isi dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm Hjdsvzxphspfx Ag Isi table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: excellent (used), Year of construction: 1987, The CDR press is designed for pressing and compressing railway wheelsets with guide bushings in a cold state. The device allows both assembly and disassembly of wheelsets for locomotives and railway cars, with simultaneous recording of the pressing force progression depending on the pressing length. After the pressing is completed, a report is printed for archiving the process. The press is a horizontal, three-column construction that prevents the press from skewing under eccentric force application and ensures precise perpendicularity between the pressed wheel and the axle journal. The pressing cylinder rests on a support traverse that moves on wheels along two beams. The pressing force, depending on the type of wheelset, is captured by the support traverse at predetermined locked positions. Pressing force kN 5 000 Stroke mm 700 Max. working speed mm/s–1 0,5÷3 Distance between columns mm 2 450 Max. wheelset length mm 2 500 Max. wheelset weight kg 1 200 Machine dimesnions mm 6 350 x 4 350 mm 4 290 Hedpfxjympr Ie Ag Ioi

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment Hodowrkctopfx Ag Iei 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop • Support arms Hedjwtyqiepfx Ag Ioi • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press Hedpeymxn Sefx Ag Iei The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: good (used), Karl Tranklein Z.P. Hydraulic Bookbinding Press Hsdpfx Aoymxn Eog Isi The machine is ready to operate. The press has a built-in hydraulic unit. Two independent stations. Irreplaceable in bookbinding for the production of books, blocks, etc.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Hedpfsymxlkex Ag Iji Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Hodpsv Taiajfx Ag Isi Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: used, Year of construction: 1991, pressure 6,3 t stroke 300 mm throat 300 mm dayligth 800 mm table surface area 450 x 400 mm table height over floor 700 mm Hsdpfx Ajylcmvsg Iei ram surface 50 mm oil volume 90 l power requirement 5,5 kW Weight 1,35 t dimensions of the machine ca. 1,8 x 2,0 x 2,7 mxmxm hole in the table 80 mm SPECIAL DEAL as is where is, WITHOUT putting into operation free loaded to truck

Condition: used, pressure 25 t stroke 500 mm Hjdpfxeylckne Ag Isi throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm SPECIAL DEAL as is where is, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. Hjdpfx Aeyizxreg Ioi All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 901,129 km, power: 302 kW (410.61 HP), first registration: 07/2007, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: other, total length: 6,100 mm, total width: 2,500 mm, total height: 3,650 mm, Year of construction: 2007, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fog lights, fridge, power assisted steering, second fuel tank, spoiler, = Additional options and accessories = - Aluminium fuel tank - Heated mirrors - Brake booster - Roof spoiler - High beam - Tipper hydraulics - PTO (Power Take-Off) - Radio/CD player - Sleeper cab - Sideskirts - Sun visor - Immobiliser = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Hodpsynua Tefx Ag Iei Transmission: ZF, manual gearbox Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: Parabolic spring Rear axle: Tyre size: 315/70 R22.5; Twin tyres; Suspension: Air suspension Unladen weight: 7,500 kg Reference number: 9

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 Hodpfxex N Sxde Ag Iji - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, workpiece length (max.): 4,100 mm, - CNC frontgauge; 2 plate supports: one fixed: can feed plate into the machine, max 4000 mm one mobile: can feed plate into the machine, max 2000 mm CNC backgauge CNC blade angle setting CNC blade clearance setting Plate support system Conveyor belt Scrap container (for first cut) Ideal machine for cutting large sheets as well as small strips! Max sheet thickness inox: 5 mm Backgauge: CNC Siemens Hedpoyiguijfx Ag Ioi Evacuation system: yes

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° Hjdpfx Agsylbmbs Iji — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm Hodpfx Ajwiry Isg Ioi 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece Hedpoyi Acfofx Ag Ioi -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min Hedpfxsyiz Nws Ag Iei -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm Hjdpfx Ajwhmv Usg Isi 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Hjdpfxjwcqpns Ag Iei Bottom roll diameter: Ø330 mm Year: 1972