Used Hydraulic Power Unit for sale (66,496)

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Hjdpfx Agov Umm Uozjg -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Condition: used, mileage: 23,233 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Hodpfxoxitmgo Agzjg Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit Hsdpfx Agowbqawszjg -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Rexroth Hydronorma, hydraulic unit -Hydraulic pump: Rexroth PV2V3-20/25R1MC 40 A1 -Motor: AEG 3 kW / 1420 rpm -Individual components: see photos Hedpohu Su Hsfx Agzjg -Hydraulic tank: tank capacity 120 l, with level indicator -Dimensions: 820/520/H880 mm -Weight: 232 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm hydraulic tank Hsdpfxob A I Sxj Agzog -Number: 4x units available -Price: per piece -Weight: 95 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit type HY 1359 Hodpowk Hrbjfx Agzog -Engine: 2.2 kW -Pressure: up to 105 bar -Flow rate: 10.5 l/min -Hydraulic tank: with filter and level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 650/510/H740 mm -Weight: 105 kg

Condition: good (used), Year of construction: 1988, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Hodjwkrbbspfx Agzeg -Manufacturer: Lippold, hydraulic unit -Pressure: 100 bar -Flow rate: 3 l/min -Motor: AEG 0.37 kW / 1360 rpm -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 350/250/H445 mm -Weight: 22.1 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg Hsdpfxed Itcle Agzeg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Hedpsd Itcrefx Agzsg -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg Hodsfpid Hepfx Agzsg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg Hjdefivi Uspfx Agzsg

Condition: used, PLC control, supply unit, converter, power module, U/E module Hodpjfivkbefx Agzsg -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz -Output: 3 AC 3.1 A -Power: 1.1 kW Hodpfx Ajfivkcogzjg -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg Hjdpjdu Ud Aofx Agzeg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg Hodpfx Agodwc I Iszog

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg Hedpfx Asf Nb Dhjgzsg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg Hjdpjd N D A Uefx Agzsg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Hodpod R Exfsfx Agzsg -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Handover: in the current condition as viewed -Motor housing: repair welding see photos Hodshhfz Eepfx Agzeg -Manufacturer: Frieseke Hoepfner, hydraulic unit MKPR 6 / 1.6 -Motor: AEG 1.1 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min at 1450 rpm -Individual components: see photos -Dimensions: 580/290 / H485 mm -Weight: 46 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Hjdpfx Asfwnb Ajgzsg -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -chuck size: Ø 250 mm -cone: Ø 94 mm -thread: M20 -pitch: 2,5 mm Hedjd Itcnopfx Agzog -Weight: 33.3 kg

Condition: used, Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed Hjdod It H Ropfx Agzeg -Feed size: Ø 250 mm -Weight: 35.5 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar Hedpfx Agsf Atrvezsg -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Hedod R Hrdopfx Agzsg -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 Hsdpfxod Ira Do Agzsg -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg