Used Horsepower Units for sale (30,460)

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Fjdpfoibh S Hox Ah Uegi

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Fgsdpfexr Ng Ujx Ah Uji Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: good (used), Year of construction: 2013, Temperature control unit plasma easy 90 Stock No.: 503641 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easy 90 Fgjdpfx Aext N R Nsh Uji Year of manufacture: 2012 Max. operating temperature: 95 °C Heating capacity: 6 kW Circulating medium: Water

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht Fsdsh Nv Itopfx Ah Uogi

Condition: good (used), Year of construction: 2018, Approx. 88 shelving units, Jungheinrich, shelf width 1m, depth 0.50m, frame height 3m – used – : Price ex location: €7,500 (net), dismantled, packed, and loaded. Fedjxtar Dopfx Ah Usgi Only €85 per unit/section. Manufacturer: Jungheinrich Type: Boltless shelving system, V230 Year of manufacture: 2018 Frame height: approx. 3m Shelf load capacity: 230kg Bay load capacity: 1,920kg Bay width / shelf width: approx. 1m Bay depth / shelf depth: approx. 50cm Shelf height: approx. 4cm Side frames: open Available: approx. 96 frames Per unit approx. 8–9 shelves = over 700 shelves Condition: good Availability: from around mid-November 2025 Location: Egelsbach, Frankfurt area

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us Fgjdpfov Iamzex Ah Uoi

Condition: used, Manufacturer: MSK Fedpfxsq U Rhpj Ah Uegi Tip: KOMBI-MULTITECH Year of manufacture: 2007 manual The device is already disassembled and can be delivered immediately!

Condition: used, Year of construction: 1998, impressions 72 Mio. max. printing speed sheets 15000 /h Fodpfxexu Nuko Ah Uegi max. paper size 37 x 52 cm plate clamping system Autoplate dampening system Alcolor perfecting 1/1 serial no. 201.776 numbering unit + Version

Condition: good (used), Year of construction: 2013, Temperature control unit plasma easy 90 Stock No.: 503640 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easy 90 Year of manufacture: 2013 Fgjdpfext N Rcex Ah Usi Max. operating temperature: 95 °C Heating capacity: 6 kW Circulating medium: water

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Max Panel Length: 55 mm Fgjdporl Utbsfx Ah Usi

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller Fsdslrvi Eopfx Ah Usgi - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: good (used), age unknown suitable for GTO 52 2 numbering boxes, 7 digits, forward perforating device lateral Delivery time: immediately from stock Fodpfx Ahjur Sixo Ujgi

Condition: ready for operation (used), We offer 4 pieces of refurbished Schlick turbines, 320 mm, including 7.5 kW motors. Price per unit - 3,000 EUR. Fgodsvphf Uepfx Ah Uji

Condition: used, Year of construction: 1975, max. printing speed sheets 8000 /h Fedpfjxu Nudjx Ah Uegi max. paper size 32 x 46 cm dampening system Aquatron numbering unit incl N+P

Condition: good (used), Year of construction: 2012, Temperature control unit plasma easy 90 Stock no.: 503639 Machine/device type: Temperature control unit Fgjdpfxjxt N Nrs Ah Uji Manufacturer: plasma Model: easy 90 Year of manufacture: 2012 Max. operating temperature: 95 °C Heating capacity: 6 kW Circulating medium: Water

Condition: new, power: 349 kW (474.51 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: fridge, = Additional options and equipment = - Leaf suspension Fedpfx Aow N Rupeh Uogi = Notes = Fuel tank: 680 ltr. Air conditioning Cab air suspension Roof spoiler Fridge Radio Bluetooth DAB = Further information = Transmission: 16-speed manual Tyre size: 315/80R22.5 Suspension: Leaf suspension Front axle: Steered Gross vehicle weight: 32,000 kg

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, without warranty or guarantee Fgedpsxuv Nzsfx Ah Uji

Condition: used, Year of construction: 1988, functionality: fully functional, Filtration system for chip and extraction silo. Was used for air recirculation back into the workshop. Self-collection only. Fjdoxvitpjpfx Ah Usgi This is a private sale.

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100 mm - Max. working height: 170 mm - 2 processing units: - Rubber pressure roller 1) Ribbed metal calibrating roller - Rubber pressure roller 2) Ribbed rubber roller + shoe + metal roller - Rubber pressure roller - Motor power for units I and II: 11 kW From below: Fsdpfx Ajxpvuyeh Ujgi - 3 metal sliding rollers - Feed belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for fine adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 8 bar - Extraction port diameter: 2x160 mm, 4x100 mm - Overall dimensions (L/W/H): 2000x1600x2100 mm - Weight: 1170 kg ADVANTAGES – Not repainted – Made in Italy – 2 processing units – DTR technical documentation – Used sander, very good condition Net price: 36,900 PLN Net price: 8,780 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: good (used), Two Swiss cylinder boring machines: 1. BH55 1049 (55–110 mm) (Price: €2,590) 2. BH35 1017 (35–58 mm) (Price: €2,590) The listed price is per unit, not for both together. Fgsdpjxvq A Sjfx Ah Uji

Condition: good (used), Year of construction: 2012, Temperature Control Unit plasma easy 90 Stock No.: 503638 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: easy 90 Year of Manufacture: 2012 Max. Operating Temperature: 95 °C Fgjdpfjxt N Nfox Ah Usi Heating Capacity: 6 kW Circulating Medium: Water/water

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Fodpfx Ahsiuc Sgj Ujgi Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: like new (used), Year of construction: 2020, operating hours: 1,444 h, load capacity: 7,000 kg, fuel type: electric, Manufacturer + model: STILL LTX 70 TUGGER ID: 25080.8022 Category: Demo Capacity: 7000 kg Fgodpfxsxrqkuj Ah Uji Year: 2020 Operating hours: 1444 DEMO & 5875 hours Battery: 48 V / 375 Ah – NEW Equipped with special trailer brakes!!!

Condition: new, We offer high-quality Corlett-type warehouse trolleys for internal transport and storage of various types of goods. Dimensions (W × D × H): • 2700 × 1150 × 1900 mm Load capacity: • approx. 600-800 kg (depending on version) Product features: • Trolleys after maintenance (inspected, refurbished, ready for operation) • 1-year warranty on used trolleys • Solid industrial-grade steel construction • Nestable design – trolleys can be slid into each other to save warehouse space • Ideal for transporting and storing furniture, board materials, and warehouse goods • Very good technical and visual condition Availability: • In stock: 250 units – available immediately Advantages: • Durable industrial quality • Easy handling and versatile use • Space-saving storage • Fast order processing Delivery and service: • Delivery possible throughout Europe • VAT invoice / EU VAT invoice Fgedpfxextwzvj Ah Usi • Possibility to inspect the goods upon prior arrangement KAM-KUB Logistic & Trolleys Europe – Your specialist in sales and service of Corlett warehouse trolleys in Europe.

Condition: like new (used), Year of construction: 2020, operating hours: 3,041 h, load capacity: 7,000 kg, fuel type: electric, Manufacturer + model: STILL LTX 70 TUGGER ID:25080.8021 Category: Used Capacity: 7000 kg Year: 2020 Hours: 3041 hours Fgsdpoxrqidofx Ah Uji Battery: 48 v / 375 ah – NEW