Used Imo Actuators for sale (1,111)

Condition: used, mileage: 342,318 km, power: 140 kW (190.35 HP), first registration: 09/2018, fuel type: diesel, overall weight: 4,600 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,100 mm, total width: 2,220 mm, total height: 2,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, audio system Audio 15 (radio with color display), exhaust pipe in front of the rear axle on the left, outside temperature display, additional battery (reinforced), 1-pole battery disconnect switch, roof control unit with reading light on the driver/passenger side, 220 A generator, head airbag system (window bag), head-shoulder airbag (thorax bag) on the driver/passenger side, head-shoulder airbag (thorax bag) on the driver side, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons including trip computer, configurable special module, smoker's package, interior rearview mirror, mud flaps in the front, seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seat cover/upholstery: synthetic leather (cab), seats in the cab: comfort passenger seat, seats in the cab: comfort sprung seat, driver's side, reinforced front stabilizer bar, fuel level sensor for auxiliary heater, separation relay with additional battery, fleece battery 95 Ah, reinforced front axle, heat-protective glazing (windshield with band filter at the top), auxiliary heater (hot water) Nedpfx Aio Aftb Ho Aolh Additional equipment: Adaptive brake light, airbag on the driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors with integrated turn signal, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/structure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, model refinement, engine 3.0 L - 140 kW CDI CAT, wheelbase 3665 mm, tire repair kit with compressor, low emission according to exhaust standard Euro 6, safety belt system with warning system (driver's side), seats in the cab: adjustable passenger seat, service interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle / rear axle.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 Nlsdpfxsud Urrs Ai Aeh -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Condition: new, Festo pneumatic linear actuator Festo DGC-25-500-KF-YSRW-A – Part number/module number 532447 Njdpfx Ajzylndoi Ajlh The specifications mean: • DGC = rodless pneumatic linear actuator • 25 = piston diameter 25 mm • 500 = 500 mm stroke • KF = slide with recirculating ball bearing guide • YSRW = self-adjusting, progressive shock absorbers • A = for position detection/proximity switch This is not a cheap standard pneumatic cylinder. The exact model DGC-25-500-KF-YSRW-A is offered in the spare parts trade, for example, for €2,500 net. Festo itself continues to list 532447 / DGC-25 in its documentation database as a linear actuator. Festo DGC-25-500-KF-YSRW-A linear actuator, 500 mm stroke, recirculating ball bearing guide, part no. 532447.

Condition: used, Second-hand SKF linear actuator, type CARE 33M20041101000024 / Motorised jointer adjustment suitable for Weinig planers. Nlsdpfx Aiez Hllmo Aeh Linear actuators are required, amongst other things, for automatic jointers. Tested and in working order. Technical data: - Stroke: 200 mm - Voltage: 24 V

Condition: new, pneumatic linear drive or slide cylinder from Festo. Festo DGPL-18-750-PPV-A-KF-B Part number: 161977 Max. operating pressure: 8 bar The DGPL is a pneumatic cylinder without a piston rod and with integrated guidance. Compressed air drives the slide back and forth along the long guide rail. The 750 indicates a stroke of 750 mm, and the 18 indicates the size/piston diameter class. Nsdpfx Aezyltyei Aslh Typical applications include positioning, moving, or feeding workpieces in machines and automation systems. Festo data sheet for part number 161977 Type DGPL-18-750-PPV-A-KF-B. • DGPL = pneumatic linear drive without a piston rod with integrated guidance. In this version, it is a ball bearing guide. • 18 = piston diameter 18 mm. • 750 = in your specifically labeled unit, 750 mm stroke. According to Festo, the series can generally be configured with strokes from 10 to 1800 mm. • PPV = pneumatic end-of-stroke cushioning, adjustable on both sides. The slide is thus pneumatically braked shortly before its end positions; Festo specifies a damping length of 16 mm here. • A = version with position detection/proximity switches; in this series, sensors can detect the position or end positions of the piston. • KF = ball bearing guide (in contrast, for example, to GF, which is a slide guide). It ensures precise and robust guidance of the slide. • B = variant/series identifier of the DGPL version. Important data for your drive It is double-acting, meaning it is actively moved in both directions with compressed air. The permissible operating pressure is 2–8 bar. At 6 bar, Festo specifies a theoretical force of 153 N in both directions – approximately equivalent to the weight of 15.6 kg, although the actually usable force is lower. The pneumatic connections are M5. Permissible ambient temperature: -10 to +60 °C. The two compressed air connections drive the internal piston. The piston is mechanically connected to the slide, which runs on the outside, via the longitudinal slot. This provides 750 mm of linear movement without a 750 mm long piston rod, which would have to extend an additional distance out of the cylinder.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Nsdpfxjturw Nj Ai Aolh Good working condition. Please check out our other listings as well.

Condition: excellent (used), mileage: 144,307 km, power: 210 kW (285.52 HP), first registration: 07/2013, overall weight: 12,500 kg, fuel type: diesel, axle configuration: 4x4, maximum load weight: 5,740 kg, empty load weight: 6,760 kg, fuel: diesel, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, number of cylinders: 6, displacement volume: 6,374 cm³, nominal power: 210 kW (285.52 HP), Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, Key Features Internal Reference: 24198M Chassis Number: WDB 405 123 1V2 338 46 Serial Number: 676.914.353 Vehicle Model: Unimog U400 4x4 Vehicle Make: Unimog Product Category: Slope Mower Condition: Used Mileage: 144307 Nedpfx Aiez Hwr Se Aolh Emissions Standard: Euro 5 Date of First Registration: 17.07.2013 Last Inspection (MFK or TÜV): 22.03.2023 Fuel Type: Diesel Overall Vehicle Condition: very good Engine Displacement (ccm): 6374 Engine Power: 285 Transmission Type: Semi-automatic Cylinders: 6 Suspension: Steel-Steel Hydraulic System: Tilting hydraulics, additional hydraulics Cab Vehicle Equipment: ABS, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Radio, Cruise Control, Central Locking Cab Size: Day Cab Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x4 Axle 1: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12500 Gross Train Weight: 32300 Payload: 5740 Unladen Weight: 6760 Vehicle Width: 2550 Superstructure Superstructure Manufacturer: MULAG Superstructure Year: 2013 Superstructure Equipment: Trailer Hydraulics, Cabin Control, Auxiliary Drive Superstructure Notes: Manufacturer: MULAG, Year: 2013, Trailer Hydraulics, Cabin Control, Auxiliary Drive, - Roadside verge mower MRM 300 - Roadside verge mowing head RMK 1200 - High-pressure blower HDG - Front-mounted - Guide post MLM 200 - Slope mowing equipment SB 500/600 - Flail mowing head with grass collection AMK 500/1200/1600 - Operating manuals available

Condition: used, mileage: 4,227 km, power: 66 kW (89.73 HP), first registration: 03/1984, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, gearing type: semi-automatic, number of gears: 6, number of seats: 5, Number of doors: 4 Number of cylinders: 6 Empty weight: 4,550 kg Gross vehicle weight (GVW): 4,550 kg Maximum speed: 78 km/h Interior: black Nsdjuu T I Ujpfx Ai Aelh Number of keys: 1

Condition: used, Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg Nljdpfxsqxvxze Ai Aeh

Condition: used, Year of construction: 2007, power: 1 kW (1.36 HP), gearing type: other, first registration: 09/2007, overall weight: 550 kg, mileage: 1 km, empty load weight: 500 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, emission class: none, Equipment: all wheel drive, * Dücker verge mower RSM13/2 * Mowing width 1.30 meters * Mowing head inclination from center position 30° * Cutting system: Flail shaft * Transport width: 2.40 meters * Working speed up to 8 km/h * Max. forward delivery: 3.20 meters * Max. outreach from the center of the vehicle 3.60 meters * Year of construction: 2007 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Nledpfxexawy Eo Ai Aoh You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: as good as new (ex-display), Tuflin sampling cock, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Nljdefuwrgepfx Ai Ash Pneumatic actuator: Part No.: 716112 C Article No.: XD130S10A-F12 Year of manufacture: 2009 Pmax (psi): 10/145 QSP: 10 In very good condition! Tuflin sampling cocks, some unused, therefore in new condition!

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 Nlsdpfow U Afksx Ai Ajh * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 05/2002, empty load weight: 2,340 kg, maximum load weight: 7,660 kg, overall weight: 10,000 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 1, Year of construction: 2002, Equipment: cabin, * Mulag Mähtronic MHU 800 * Rear boom with 6m extension * For mounting various municipal equipment * Swivel up to 2.50 m * Swivel range 90° to the rear * Including joystick control Original Mulag * 6 hydraulic control circuits * Suitable for all Unimog and all municipal vehicles * Unladen weight: 2,340 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Njdpfxoxawylj Ai Ajlh We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Nljdjzhidropfx Ai Aeh Ph1 / 0.3 phase slider Dust cover

Condition: used, mileage: 1,000 km, power: 30 kW (40.79 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 1,250 kg, maximum load weight: 10 kg, overall weight: 1,260 kg, axle configuration: 4x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Year of construction: 2003, Equipment: all wheel drive, * German appliance * Dücker wood chipper type HF 960 * Condition see photos * Drive via PTO shaft * Suitable for all Unimog, tractors and other municipal vehicles * Hydraulic feed via chains and gear wheels * Drive via the PTO shaft * Wood diameter up to 240 mm * Chipping capacity up to 20m³/hour * Throwing range of the chipper up to 10 m * Engine power 70KW * Working pressure 200 bar * Discharge rotat. - and height adjustable * Large hopper 100x75 cm * Weight approx. 1.250 kg. * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. Nodpovhp T Refx Ai Aelh - .

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2008, loading space length: 7,050 mm, loading space width: 2,450 mm, loading space height: 2,540 mm, total length: 9,140 mm, total width: 2,600 mm, wheelbase: 5,250 mm, color: other, 13wbsp = More information = Year of construction: 2008 Empty weight: 4.861 kg Carrying capacity: 13.139 kg GVW: 18.000 kg Make of bodywork: CARIER maxima Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Registration number: 13-WB-SP = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) Nlsdjymrhlspfx Ai Ajh BIC/SWIFT: INGBNL2A

Condition: new, functionality: fully functional, Hoerbiger Origa OSP-P40-02000-00370 Linear actuator. Good working condition. Please check out our other listings as well. Nedpfxetvz I Do Ai Aolh

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor, gas pressure regulator, electrohydraulic drive, rotary actuator Nledpfx Aijzkhqce Aeh -Manufacturer: Deufra, electric actuator, rotary actuator -Type: AS 25 -Voltage: 400 V / 0.1 kW -Mounting: Bolt circle Ø 101 mm M10 / Ø 70 mm M8 -Dimensions: 460/310/H190 mm -Weight: 19.7 kg

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 08/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,980 mm, loading space length: 4,250 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: - 2nd battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Passenger airbags - Aluminum trim at sliding door step - Tow bar: ball head, for increased trailer load - 3.5 t - 13-pin trailer socket - Electric roof ventilator II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry handle on rear left D-pillar - Entry handle on rear right D-pillar - Tachograph controls front under roof headliner - Chassis: Stabilization level II - Transmission lock for PTO - Grab handles on A-pillars - Additional main key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal strip for electrical connections (driver's seat base) - LED cargo area light - Cable duct at rear portal - Cable duct at side wall - Multimedia system MBUX (7" touchscreen) - PTO 2 B with layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Spare wheel with same specification as driving tires - Spare wheel carrier under rear chassis incl. jack - Amber warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) - Wipers with rain sensor - Off-road chassis - Seat belt warning system with alert (passenger side) - Cabin seats: passenger double seat - Cabin seats: comfort driver's seat - Engine start/stop system - 12V socket in driver's cab - Additional separating relay with extra battery - USB port middle under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Nodpfjy Nf T Uex Ai Aslh Further equipment: - 2 extra main keys - Overhead parcel shelf - Aluminum protective strip, floor covering, entry - Trailer hitch for increased towing capacity 3.5 t incl. 13-pin socket - Fixing rails for roof rack - Passenger airbag - Passenger double seat - Warning film application - Hill start assist - Flat indicator lamps, extra rear on roof - Electric roof ventilator II - Load space ceiling light with door contact - Constant speed control - Eco start-stop function - Entry grip on rear left corner pillar - Transmission lock for PTO - Passenger seat belt warning device - Entry grab handles for driver and passenger - Wooden floor - Terminal strip for electrical connection - Controlled air conditioning TEMPMATIK - Comfort roof control unit - Comfort driver's seat - LED light strip in load compartment - M. Becker MobiE generator offer 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Rain sensor - Spare wheel - Spare wheel holder under end of frame - Reversing camera - Reverse warning device - Double-wing rear door, opening up to side wall - Amber warning lights front left/rear right - Rough road version - Sortimo racking system - Stabilization level II - Socket in cab - Tank sender for auxiliary heater - Additional separating relay at battery - USB socket 5V - Additional features: Interchangeable ball/pin towing coupling - Additional features: Switchable additional hot air heating - Auxiliary battery for retrofit consumers, engine compartment 3rd brake light, storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, hill start assist, traction control (ASR), washer fluid level display, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, cab roof lining, ...

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 02/2006, loading space length: 11,640 mm, loading space width: 2,490 mm, loading space height: 2,490 mm, total length: 12,200 mm, total width: 2,600 mm, wheelbase: 7,460 mm, color: other, Equipment: tail-lift, General information Year of construction: 2006 Nodpfx Aoy Af A Nsi Ajlh Registration number: OJ-71-FV Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Empty weight: 9.120 kg Carrying capacity: 23.880 kg GVW: 33.000 kg Functional Tail lift: BAR CARGOLIFT, 3000 kg Cooling engine: diesel Condition Technical condition: good Visual appearance: good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- Nljdpoxwvh Ajfx Ai Aeh -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide Nledpfxoxwlfwj Ai Aoh -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Condition: used, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, gearing type: semi-automatic, number of gears: 8, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electric window regulation, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional options and equipment = - Tachometer Nedpfx Aevk Nqnei Ajlh - Rear electric windows - Radio/CD player - Reversing camera = Further information = Number of cylinders: 6 Engine displacement: 6,374 cc Unladen weight: 8,663 kg Payload: 3,837 kg Gross vehicle weight: 12,500 kg Max. towing capacity: 10,000 kg (unbraked 750 kg) Interior: grey MOT (main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: used, Year of construction: 2021, Used metal stamping press ALP-25J (25T, 2021) for sale. Condition: used, good condition. Can be tested. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 Compact and reliable mechanical eccentric stamping press designed for forming, cutting, blanking, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 65 mm Stroke frequency: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Slider working area: 560 × 370 mm Table (bolster) area: 250 × 220 mm Country of origin: China Weight: 800 kg Application: The ALP-25J press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in the production of tools, metal structures, and automotive parts; working with thin and medium-thickness sheet metal. Nlsdpfx Aszktuasi Aeh If you have any further questions, please do not hesitate to ask.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. Nsdpov Nv Tajfx Ai Aolh The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg